makefile

这个linux源代码是很全面的~基本完整了~使用c编译的~由于时间问题我没有亲自测试~但就算用来做参考资料也是非常好的

#
# linux/drivers/maps/Makefile
#
# $Id: Makefile,v 1.21 2002/02/22 09:34:44 gleixner Exp $

O_TARGET	:= mapslink.o

# Chip mappings
obj-$(CONFIG_MTD_CDB89712)      += cdb89712.o
obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o
obj-$(CONFIG_MTD_DC21285)       += dc21285.o
obj-$(CONFIG_MTD_DILNETPC)      += dilnetpc.o
obj-$(CONFIG_MTD_ELAN_104NC)    += elan-104nc.o
obj-$(CONFIG_MTD_EPXA10DB)      += epxa10db-flash.o
obj-$(CONFIG_MTD_IQ80310)	+= iq80310.o
obj-$(CONFIG_MTD_L440GX)	+= l440gx.o
obj-$(CONFIG_MTD_AMD766ROM)	+= amd766rom.o
obj-$(CONFIG_MTD_ICH2ROM)	+= ich2rom.o
obj-$(CONFIG_MTD_TSUNAMI)	+= tsunami_flash.o
obj-$(CONFIG_MTD_MBX860)	+= mbx860.o
obj-$(CONFIG_MTD_NORA)		+= nora.o
obj-$(CONFIG_MTD_OCTAGON)	+= octagon-5066.o
obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o 
obj-$(CONFIG_MTD_PNC2000)	+= pnc2000.o
obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
obj-$(CONFIG_MTD_SA1100)        += sa1100-flash.o
obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o
obj-$(CONFIG_MTD_SC520CDP)	+= sc520cdp.o
obj-$(CONFIG_MTD_NETSC520)	+= netsc520.o
obj-$(CONFIG_MTD_SUN_UFLASH)    += sun_uflash.o
obj-$(CONFIG_MTD_VMAX)		+= vmax301.o
obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.o
obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI)		+= pci.o
obj-$(CONFIG_MTD_PB1000)        += pb1xxx-flash.o
obj-$(CONFIG_MTD_PB1100)        += pb1xxx-flash.o
obj-$(CONFIG_MTD_PB1500)        += pb1xxx-flash.o
obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o

include $(TOPDIR)/Rules.make