loadmmu.c

这个linux源代码是很全面的~基本完整了~使用c编译的~由于时间问题我没有亲自测试~但就算用来做参考资料也是非常好的

/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1996 David S. Miller ([e-mail])
 * Copyright (C) 1997, 1999 Ralf Baechle ([e-mail])
 * Copyright (C) 1999 Silicon Graphics, Inc.
 */
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>

#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>

/* memory functions */
void (*_clear_page)(void * page);
void (*_copy_page)(void * to, void * from);

/* Cache operations. */
void (*_flush_cache_all)(void);
void (*___flush_cache_all)(void);
void (*_flush_cache_mm)(struct mm_struct *mm);
void (*_flush_cache_range)(struct vm_area_struct *vma, unsigned long start,
                           unsigned long end);
void (*_flush_cache_page)(struct vm_area_struct *vma, unsigned long page);
void (*_flush_cache_sigtramp)(unsigned long addr);
void (*_flush_icache_range)(unsigned long start, unsigned long end);
void (*_flush_icache_page)(struct vm_area_struct *vma, struct page *page);
void (*_flush_page_to_ram)(struct page * page);
void (*_flush_icache_all)(void);

/* MIPS specific cache operations */
void (*_flush_cache_l2)(void);
void (*_flush_cache_l1)(void);


/* DMA cache operations. */
void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
void (*_dma_cache_wback)(unsigned long start, unsigned long size);
void (*_dma_cache_inv)(unsigned long start, unsigned long size);

/* Miscellaneous. */
void (*_update_mmu_cache)(struct vm_area_struct * vma,
	unsigned long address, pte_t pte);

extern void ld_mmu_r4xx0(void);
extern void ld_mmu_andes(void);
extern void ld_mmu_sb1(void);
extern void sb1_tlb_init(void);
extern void ld_mmu_mips64(void);
extern void r4k_tlb_init(void);

void __init load_mmu(void)
{
	if (mips_cpu.options & MIPS_CPU_4KTLB) {
#if defined (CONFIG_CPU_R4300)						\
    || defined (CONFIG_CPU_R4X00)					\
    || defined (CONFIG_CPU_R5000)					\
    || defined (CONFIG_CPU_NEVADA)
		printk(KERN_INFO "Loading R4000 MMU routines.\n");
		ld_mmu_r4xx0();
#endif
#if defined(CONFIG_CPU_MIPS64)
		printk(KERN_INFO "Loading MIPS64 MMU routines.\n");
                ld_mmu_mips64();
		r4k_tlb_init();
#endif

	} else switch(mips_cpu.cputype) {
#ifdef CONFIG_CPU_R10000
	case CPU_R10000:
	case CPU_R12000:
		printk(KERN_INFO "Loading R10000 MMU routines.\n");
		ld_mmu_andes();
		break;
#endif
#if defined CONFIG_CPU_SB1
	case CPU_SB1:
		printk(KERN_INFO "Loading SB1 MMU routines.\n");
		ld_mmu_sb1();
		sb1_tlb_init();
		break;
#endif

	case CPU_R8000:
		panic("R8000 is unsupported");
		break;

	default:
		/* XXX We need an generic routine in the MIPS port
		 * XXX to jabber stuff onto the screen on all machines
		 * XXX before the console is setup.  The ARCS prom
		 * XXX routines look good for this, but only the SGI
		 * XXX code has a full library for that at this time.
		 */
		panic("Yeee, unsupported mmu/cache architecture or "
		      "wrong compiletime kernel configuration.");
	}
}