iap3300.map

尽量朝“单片”方向设计硬件系统。系统器件越多

**********************************************************************
                  PSDsoft Express Version 8.00
           Output of PSD Fitter - Memory Map Report
**********************************************************************
PROJECT    : iap3300                                  DATE : 11/11/2003
DEVICE     : uPSD3334D                                TIME : 15:27:29
**********************************************************************

==== Device Configuration ====

Data Bus Width                                                    : 8 bit
Security Protection                                               : OFF

Main PSD flash memory will reside in this space at power-up       : Data space
Secondary PSD flash memory will reside in this space at power-up  : Program space

Flash Sector 0 is unprotected.
Flash Sector 1 is unprotected.
Flash Sector 2 is unprotected.
Flash Sector 3 is unprotected.
Flash Sector 4 is unprotected.
Flash Sector 5 is unprotected.
Flash Sector 6 is unprotected.
Flash Sector 7 is unprotected.
Flash Boot Sector 0 is unprotected.
Flash Boot Sector 1 is unprotected.
Flash Boot Sector 2 is unprotected.
Flash Boot Sector 3 is unprotected.

==== Memory Map Report ====

Total address field length available 	= 24 bits
Page register length                 	= 8 bits
Natural address field length         	= 16 bits
Bits used for logic                  	= 0 bits
Address Mask                         	= 0x07FFFF

Available field   xxxxxxxxxxxxxxxxxxxxxxxx
Hardware          PPPPPPPPAAAAAAAAAAAAAAAA
Application usage      PPPAAAAAAAAAAAAAAAA

Label        Page Bit     start       end       Mem          comments
y=page(don't care)
fs0          0byyyyy000   0x8000      0xFFFF    F            // & !pdn
             0byyyyyyyy   0x0000      0x1FFF    F            // & !pdn
fs1          0byyyyy001   0x8000      0xFFFF    F            // & !pdn
fs2          0byyyyy010   0x8000      0xFFFF    F            // & !pdn
fs3          0byyyyy011   0x8000      0xFFFF    F            // & !pdn
fs4          0byyyyy100   0x8000      0xFFFF    F            // & !pdn
fs5          0byyyyy101   0x8000      0xFFFF    F            // & !pdn
fs6          0byyyyy110   0x8000      0xFFFF    F            // & !pdn
fs7          0byyyyy111   0x8000      0xFFFF    F            // & !pdn
csboot0      0byyyyy000   0x0000      0x1FFF    F            // & !pdn
             0byyyyy000   0x8000      0x9FFF    F            // & !pdn
             0byyyyyyyy   0x0000      0x1FFF    F            // & !pdn
csboot1      0byyyyy000   0xA000      0xBFFF    F            // & !pdn
csboot2      0byyyyy000   0xC000      0xDFFF    F            // & !pdn
csboot3      0byyyyy000   0xE000      0xFFFF    F            // & !pdn
rs0          0byyyyyyyy   0x2000      0x3FFF    V            // & !pdn
csiop        0byyyyyyyy   0x0200      0x02FF    V            // & !pdn
psel0        0byyyyyyyy   0x0300      0x03FF    Peripheral   // & !pdn & _psen
LCD_a0                                                       // > 100 address ranges, no address range generated.
LCD_a1                                                       // > 100 address ranges, no address range generated.
LCD_e        0byyyyyyyy   0x0300      0x03FF    Peripheral   // & !_rd
             0byyyyyyyy   0x0300      0x03FF    Peripheral   // & !_wr