configure

刚才是说明 现在是安装程序在 LINUX环境下进行编程的MPICH安装文件

Using this make may cause problems when building programs.
You should consider using gnumake instead." 1>&2
    
fi



echo $ac_n "checking for virtual path format""... $ac_c" 1>&6
echo "configure:804: checking for virtual path format" >&5
if eval "test \"`echo '$''{'pac_cv_prog_make_vpath'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  

rm -rf conftest*
mkdir conftestdir
cat >conftestdir/a.c <<EOF
A sample file
EOF
cat > conftest <<EOF
all: a.o
VPATH=.:conftestdir
.c.o:
	@echo \$<
EOF
ac_out=`$MAKE -f conftest 2>&1 | grep 'conftestdir/a.c'`
if test -n "$ac_out" ; then 
    pac_cv_prog_make_vpath="VPATH"
else
    rm -f conftest
    cat > conftest <<EOF
all: a.o
.PATH: . conftestdir
.c.o:
	@echo \$<
EOF
    ac_out=`$MAKE -f conftest 2>&1 | grep 'conftestdir/a.c'`
    if test -n "$ac_out" ; then 
        pac_cv_prog_make_vpath=".PATH"
    else
	pac_cv_prog_make_vpath="neither VPATH nor .PATH works"
    fi
fi
rm -rf conftest*

fi

echo "$ac_t""$pac_cv_prog_make_vpath" 1>&6
if test "$pac_cv_prog_make_vpath" = "VPATH" ; then
    VPATH='VPATH=.:${srcdir}'
elif test "$pac_cv_prog_make_vpath" = ".PATH" ; then
    VPATH='.PATH: . ${srcdir}'
fi



echo $ac_n "checking whether make sets CFLAGS""... $ac_c" 1>&6
echo "configure:853: checking whether make sets CFLAGS" >&5
if eval "test \"`echo '$''{'pac_cv_prog_make_set_cflags'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  

/bin/rm -f conftest
cat > conftest <<EOF
SHELL=/bin/sh
ALL:
	@echo X\${CFLAGS}X
EOF
pac_str=`$MAKE -f conftest 2>&1`
/bin/rm -f conftest 
if test "$pac_str" = "XX" ; then
    pac_cv_prog_make_set_cflags="no"
else
    pac_cv_prog_make_set_cflags="yes"
fi

fi

echo "$ac_t""$pac_cv_prog_make_set_cflags" 1>&6
if test "$pac_cv_prog_make_set_cflags" = "no" ; then
    :
else
    SET_CFLAGS='CFLAGS='
fi

if test "$pac_cv_prog_make_echos_dir" = "no" ; then
    echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:884: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftestmake <<\EOF
all:
	@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
  eval ac_cv_prog_make_${ac_make}_set=yes
else
  eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  SET_MAKE=
else
  echo "$ac_t""no" 1>&6
  SET_MAKE="MAKE=${MAKE-make}"
fi

else
    SET_MAKE="MAKE=${MAKE-make}"
fi


for ac_hdr in \
    assert.h					\
    limits.h					\
    sys/types.h					\
    sys/uio.h					\
    unistd.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:924: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat >conftest.c<<EOF
#line 929 "configure"
#include "confdefs.h"
#include <$ac_hdr>
int conftest() {return 0;}
EOF
ac_compile_for_cpp='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5'
if { (eval echo configure:935: \"$ac_compile_for_cpp\") 1>&5; (eval $ac_compile_for_cpp) 2>&5; }; then
    eval "ac_cv_header_$ac_safe=yes"
else
    eval "ac_cv_header_$ac_safe=no"
    echo "configure: failed program was:" >&5
    cat conftest.c >&5
fi
rm -f conftest*

fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


for ac_func in gethostname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:961: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 966 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:989: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


cat > conftest.$ac_ext <<EOF
#line 1015 "configure"
#include "confdefs.h"

#include <stdio.h>
#define MY_PRINTF(rank, fmt, args...)  printf("%d: " fmt, rank, ## args)

int main() {

MY_PRINTF(0, "hello");
MY_PRINTF(1, "world %d", 3);

; return 0; }
EOF
if { (eval echo configure:1028: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  pac_cv_have_cpp_varargs=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  pac_cv_have_cpp_varargs=no
fi
rm -f conftest*
if test $pac_cv_have_cpp_varargs = "yes" ; then
    cat >> confdefs.h <<\EOF
#define HAVE_CPP_VARARGS 
EOF

fi












if test "$cache_file" = "/dev/null" -a "X$real_enable_cache" = "Xnotgiven" ; then
    cache_file=$$conf.cache
    touch $cache_file
                ac_cv_env_CC_set=set
    ac_cv_env_CC_value=$CC
    ac_cv_env_CFLAGS_set=set
    ac_cv_env_CFLAGS_value=$CFLAGS
    ac_cv_env_CPP_set=set
    ac_cv_env_CPP_value=$CPP
    ac_cv_env_CPPFLAGS_set=set
    ac_cv_env_CPPFLAGS_value=$CPPFLAGS
    ac_cv_env_LDFLAGS_set=set
    ac_cv_env_LDFLAGS_value=$LDFLAGS
            cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

    ac_configure_args="$ac_configure_args -enable-cache"
fi
export CC
export CFLAGS
export LDFLAGS
export CPPFLAGS
export CPP

subdirs="channels/${channel_name}"


trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.