ucosii_ex1.opt

UCOSII移植到４３０芯片中使用

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.a*; *.src)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0
GRPOPT 2,(note),1,0,0

OPTFFF 1,1,1,0,0,0,0,0,<.\OS_CPU_C.C><OS_CPU_C.C> 
OPTFFF 1,2,1,0,0,31,31,0,<.\UCOS_II.C><UCOS_II.C> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,227,255,255,255,140,0,0,0,140,0,0,0,44,3,0,0,194,1,0,0 }
OPTFFF 1,3,2,0,0,105,105,0,<.\OS_CPU_A.ASM><OS_CPU_A.ASM> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,227,255,255,255,56,0,0,0,56,0,0,0,216,2,0,0,110,1,0,0 }
OPTFFF 1,4,1,2,0,1,22,0,<.\Ex1.c><Ex1.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,227,255,255,255,30,0,0,0,30,0,0,0,183,2,0,0,57,1,0,0 }
OPTFFF 2,5,5,0,0,1,3,0,<.\说明.txt><说明.txt> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,225,255,255,255,30,0,0,0,30,0,0,0,187,2,0,0,61,1,0,0 }

ExtF <.\说明.txt> 1,3,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,225,255,255,255,30,0,0,0,30,0,0,0,187,2,0,0,61,1,0,0 }

TARGOPT 1, (Target 1)
 CLK51=24000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\ATMEL\DOC0313.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\ATMEL\DOC0509.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-p52)(S8051.DLL)()(TP51.DLL)(-p52)
  OPTDBG 509,0,()()()()()()()()()() ()()()()
  OPTKEY 0,(DLGDP51)((98=-1,-1,-1,-1,0)(82=-1,-1,-1,-1,0)(83=-1,-1,-1,-1,0)(84=-1,-1,-1,-1,0)(85=-1,-1,-1,-1,0)(99=-1,-1,-1,-1,0)(91=-1,-1,-1,-1,0)(92=-1,-1,-1,-1,0)(93=-1,-1,-1,-1,0))
  OPTWA 0,1,(counter0)
  OPTWA 1,1,(counter1)
  OPTWA 2,1,(counter2)
  OPTDF 0x96
  OPTLE <>
  OPTLC <>
EndOpt