caltrgtpwr_ar5001a2_cb21.txt

atheros ar5001 5002 driver

# target power file for AR5001A+ 802.11a Cardbus Reference Design
  
# 11a Target Power table : 
#	 Rules:
#		1. up to a maximum of 8 test frequencies
#		2. test frequencies DO NOT need to cover the entire range of 5180-5850. It
#		   is allowed to provide data for a smaller range. for all channels
#		   outside of test frequencies range, target power will be assumed 0dB.
#		3. specify mask/PER limited target power for various rates
#
#BEGIN_11a_TARGET_POWER_TABLE  
#  test_frequencies   6-24_target  36_target 48_target   54_target 

   5170			18		 17		 16	    14		
   5240			18		 17		 16	    14		
   5320			18		 17		 16	    14		
   5500			18		 16		 15	    12		
   5700			18		 16		 15	    12		
   5745			18		 16		 13	    10		
   5850			18		 16		 13	    10		


#END_11a_TARGET_POWER_TABLE


# Test Groups :
#      Rules:
#		1. Specify up to 8 band edges for each test group.
#		2. If no backoff desired at a band edge, give a large number (e.g, 30) so
#		   that  the target power becomes the driver determined limit.
#

#BEGIN_TEST_GROUPS

# Test Group 1: US and CANADA (FCC) (base mode 802.11a)
#	test_group_code	BE1	BE2	BE3	BE4	BE5	BE6	BE7	BE8
	0x10		5180	5200	5320	5745	5765	5785	5805	5825
			14	14	14.5	16.5	16.5	16.5	16.5	16.5  # Band Edge Max Power
			0	0	0	0	0	0	0	0   # in-band flag

# Test Group 2: US and CANADA (FCC) (turbo mode 802.11a)
#	test_group_code	BE1	BE2	BE3	BE4	BE5	
	0x13		5210	5250	5290	5760	5800	
			14.5	14.5	15	15.5	15.5	# Band Edge Max Power
			0	0	0	0	0	  # in-band flag

# Test Group 3: JAPAN (MKK)
#	test_group_code	BE1	BE2	BE3	BE4	BE5	BE6	BE7	BE8
	0x40		5170	5230	
			30	30	  # Band Edge Max Power
			0	0	  # in-band flag


# Test Group 4: EUROPE (ETSI)
#	test_group_code	BE1	BE2	BE3	BE4	BE5	BE6	BE7	BE8
	0x30		5180	5240	5260	5320	5500	5700	5725	5825
			30	30	30	30	30	30	30	30  # Band Edge Max Power
			0	0	0	0	0	0	0	0   # in-band flag

#END_TEST_GROUPS