aescrypt.asm

aes加解密算法源代码

; ---------------------------------------------------------------------------
; Copyright (c) 2002, Dr Brian Gladman, Worcester, UK.   All rights reserved.
;
; LICENSE TERMS
;
; The free distribution and use of this software in both source and binary
; form is allowed (with or without changes) provided that:
;
;   1. distributions of this source code include the above copyright
;      notice, this list of conditions and the following disclaimer;
;
;   2. distributions in binary form include the above copyright
;      notice, this list of conditions and the following disclaimer
;      in the documentation and/or other associated materials;
;
;   3. the copyright holder's name is not used to endorse products
;      built using this software without specific written permission.
;
; ALTERNATIVELY, provided that this notice is retained in full, this product
; may be distributed under the terms of the GNU General Public License (GPL),
; in which case the provisions of the GPL apply INSTEAD OF those given above.
;
; DISCLAIMER
;
; This software is provided 'as is' with no explicit or implied warranties
; in respect of its properties, including, but not limited to, correctness
; and/or fitness for purpose.
; ---------------------------------------------------------------------------
; Issue 28/01/2004

; An AES implementation for Pentium processors using the NASM assembler (see
; <http://sourceforge.net/projects/nasm>).This version provides the standard
; AES block length (128 bits, 16 bytes) with the same interface as that used
; in my C implementation.  The eax, ecx and edx registers and the artihmetic
; status flags are not preserved.   The ebx, esi, edi, and ebp registers are
; preserved across calls.  Only encryption and decryption are provided here,
; here, the key scheduling code being that in aeskey.c compiled with USE_ASM
; defined. This code uses the VC++ register saving conentions; if it is used
; with another compiler, its conventions for using and saving registers will
; need to be checked (and calling conventions).    The NASM command line for
; the VC++ custom build step is:
;
;    nasm -O2 -f win32 -o "$(TargetDir)\$(InputName).obj" "$(InputPath)"

    section .text ; use32

; aes_rval aes_encrypt(const unsigned char in_blk[],
;                   unsigned char out_blk[], const aes_encrypt_ctx cx[1]);
; aes_rval aes_decrypt(const unsigned char in_blk[],
;                   unsigned char out_blk[], const aes_decrypt_ctx cx[1]);
;
; comment in/out the following lines to obtain the desired subroutines. These
; selections MUST match those in the C header file aes.h

%define AES_128     ; define if AES with 128 bit keys is needed
%define AES_192     ; define if AES with 192 bit keys is needed
%define AES_256     ; define if AES with 256 bit keys is needed
%define AES_VAR     ; define if a variable key size is needed
%define ENCRYPTION  ; define if encryption is needed
%define DECRYPTION  ; define if decryption is needed

%ifdef AES_VAR
%define KS_LENGTH       60
%elifdef AES_256
%define KS_LENGTH       60
%elifdef AES_192
%define KS_LENGTH       52
%else
%define KS_LENGTH       44
%endif

; The DLL interface must use the _stdcall convention in which the number
; of bytes of parameter space is added after an @ to the sutine's name.
; We must also remove our parameters from the stack before return (see
; the do_ret macro). Define AES_DLL for the Dynamic Link Library version.

;%define AES_DLL

tlen    equ  1024   ; length of each of 4 'xor' arrays (256 32-bit words)

; offsets to parameters with one register pushed onto stack

in_blk  equ     4   ; input byte array address parameter
out_blk equ     8   ; output byte array address parameter
ctx     equ    12   ; AES context structure
stk_spc equ    24   ; stack space

; register mapping for encrypt and decrypt subroutines

%define r0  eax
%define r1  ebx
%define r2  esi
%define r3  edi
%define r4  ecx
%define r5  edx
%define r6  ebp

%define eaxl  al
%define eaxh  ah
%define ebxl  bl
%define ebxh  bh
%define ecxl  cl
%define ecxh  ch
%define edxl  dl
%define edxh  dh

; These macros take a 32-bit word representing a column and use each
; of its 4 bytes to index a table of 256 32-bit words which are xored
; into each of the four output columns. The output values are in the
; registers %1, %2, %3 and %4 and the column input is in %5 with %6
; as a scratch register.

; Parameters:
;   %1  out_state[0]
;   %2  out_state[1]
;   %3  out_state[2]
;   %4  out_state[3]
;   %5  input register for the round (destroyed)
;   %6  scratch register for the round
;   %7  key schedule address for round (in form r6 + offset)

%macro do_fcol 8            ; first column forward round

    movzx   %6,%5l
    mov     %1,[%8]
    xor     %1,[4*%6+%7]
    movzx   %6,%5h
    shr     %5,16
    mov     %2,[%8+12]
    xor     %2,[4*%6+%7+tlen]
    movzx   %6,%5l
    mov     %3,[%8+ 8]
    xor     %3,[4*%6+%7+2*tlen]
    movzx   %6,%5h
    mov     %5,%4           ; save an input register value
    mov     %4,[%8+ 4]
    xor     %4,[4*%6+%7+3*tlen]

%endmacro

%macro do_icol 8            ; first column for inverse round

    movzx   %6,%5l
    mov     %1,[%8]
    xor     %1,[4*%6+%7]
    movzx   %6,%5h
    shr     %5,16
    mov     %2,[%8+ 4]
    xor     %2,[4*%6+%7+tlen]
    movzx   %6,%5l
    mov     %3,[%8+ 8]
    xor     %3,[4*%6+%7+2*tlen]
    movzx   %6,%5h
    mov     %5,%4           ; save an input register value
    mov     %4,[%8+12]
    xor     %4,[4*%6+%7+3*tlen]

%endmacro

%macro do_col   7           ; other columns for forward and inverse rounds

    movzx   %6,%5l
    xor     %1,[4*%6+%7]
    movzx   %6,%5h
    shr     %5,16
    xor     %2,[4*%6+%7+tlen]
    movzx   %6,%5l
    xor     %3,[4*%6+%7+2*tlen]
    movzx   %6,%5h
    xor     %4,[4*%6+%7+3*tlen]

%endmacro

; These macros implement stack based local variables

%macro  save 2
    mov     [esp+4*%1],%2
%endmacro

%macro  restore 2
    mov     %1,[esp+4*%2]
%endmacro

; This macro performs a forward encryption cycle. It is entered with
; the first previous round column values in r0, r1, r2 and r3 and
; exits with the final values in the same registers.

%macro fwd_rnd 1-2 _t_fn                ; normal forward rounds

    mov     r4,r0
    save    0,r2
    save    1,r3

; compute new column values

    do_fcol r0,r3,r2,r1, r4,r5, %2, %1  ; r4 = input r0
    do_col  r1,r0,r3,r2, r4,r5, %2      ; r4 = input r1 (saved in do_fcol)
    restore r4,0
    do_col  r2,r1,r0,r3, r4,r5, %2      ; r4 = input r2
    restore r4,1
    do_col  r3,r2,r1,r0, r4,r5, %2      ; r4 = input r3

%endmacro

; This macro performs an inverse encryption cycle. It is entered with
; the first previous round column values in r0, r1, r2 and r3 and
; exits with the final values in the same registers.

%macro inv_rnd 1-2 _t_in                ; normal inverse round

    mov     r4,r0
    save    0,r1
    save    1,r2

; compute new column values

    do_icol r0,r1,r2,r3, r4,r5, %2, %1  ; r4 = r0
    do_col  r3,r0,r1,r2, r4,r5, %2      ; r4 = r3 (saved in do_icol)
    restore r4,1
    do_col  r2,r3,r0,r1, r4,r5, %2      ; r4 = r2
    restore r4,0
    do_col  r1,r2,r3,r0, r4,r5, %2      ; r4 = r1

%endmacro

; the DLL has to implement the _stdcall calling interface on return
; In this case we have to take our parameters (3 4-byte pointers)
; off the stack

%macro  do_ret  0-1 12
%ifdef AES_DLL
    ret %1
%else
    ret
%endif
%endmacro

%macro  do_name 1-2 12
%ifndef AES_DLL
    global  %1
%1:
%else
    global  %1@%2
    export  %1@%2
%1@%2:
%endif
%endmacro

; AES Encryption Subroutine

%ifdef  ENCRYPTION

    extern  _t_fn
    extern  _t_fl

    do_name _aes_encrypt

    sub     esp,stk_spc
    mov     [esp+20],ebp
    mov     [esp+16],ebx
    mov     [esp+12],esi
    mov     [esp+ 8],edi
    mov     r4,[esp+in_blk+stk_spc] ; input pointer
    mov     r6,[esp+ctx+stk_spc]    ; key pointer

; input four columns and xor in first round key

    mov     r0,[r4   ]
    mov     r1,[r4+ 4]
    xor     r0,[r6   ]
    xor     r1,[r6+ 4]
    mov     r2,[r4+ 8]
    mov     r3,[r4+12]
    xor     r2,[r6+ 8]
    xor     r3,[r6+12]

; determine the number of rounds

    mov     r4,[r6+4*KS_LENGTH]
    cmp     r4,10
    je      .3
    lea     r6,[r6+32]
    cmp     r4,12
    je      .2
    lea     r6,[r6+32]
    cmp     r4,14
    je      .1
    mov     eax,-1
    jmp     .4

.1: fwd_rnd r6- 48          ; 14 rounds for 256-bit key
    fwd_rnd r6- 32
.2: fwd_rnd r6- 16          ; 12 rounds for 192-bit key
    fwd_rnd r6
.3: fwd_rnd r6+ 16          ; 10 rounds for 128-bit key
    fwd_rnd r6+ 32
    fwd_rnd r6+ 48
    fwd_rnd r6+ 64
    fwd_rnd r6+ 80
    fwd_rnd r6+ 96
    fwd_rnd r6+112
    fwd_rnd r6+128
    fwd_rnd r6+144
    fwd_rnd r6+160, _t_fl   ; last round uses a different table

; move final values to the output array

    mov     r6,[esp+out_blk+stk_spc]
    mov     [r6+12],r3
    mov     [r6+8],r2
    mov     [r6+4],r1
    mov     [r6],r0
    xor     eax,eax
.4: mov     ebp,[esp+20]
    mov     ebx,[esp+16]
    mov     esi,[esp+12]
    mov     edi,[esp+ 8]
    lea     esp,[esp+stk_spc]
    do_ret

%endif

; AES Decryption Subroutine

%ifdef  DECRYPTION

    extern  _t_in
    extern  _t_il

    do_name _aes_decrypt

    sub     esp,stk_spc
    mov     [esp+20],ebp
    mov     [esp+16],ebx
    mov     [esp+12],esi
    mov     [esp+ 8],edi
    mov     r4,[esp+in_blk+stk_spc] ; input pointer
    mov     r6,[esp+ctx+stk_spc]    ; context pointer

; input four columns

    mov     r0,[r4]
    mov     r1,[r4+4]
    mov     r2,[r4+8]
    mov     r3,[r4+12]

; determine the number of rounds

    mov     r4,[r6+4*KS_LENGTH]

; xor in initial keys

    lea     r5,[4*r4]
    lea     r5,[r6+4*r5]
    xor     r0,[r5   ]
    xor     r1,[r5+ 4]
    xor     r2,[r5+ 8]
    xor     r3,[r5+12]
    cmp     r4,10
    je      .3
    cmp     r4,12
    je      .2
    cmp     r4,14
    je      .1
    mov     eax,-1
    jmp     .4

.1: inv_rnd r6+208          ; 14 rounds for 256-bit key
    inv_rnd r6+192
.2: inv_rnd r6+176          ; 12 rounds for 192-bit key
    inv_rnd r6+160
.3: inv_rnd r6+144          ; 10 rounds for 128-bit key
    inv_rnd r6+128
    inv_rnd r6+112
    inv_rnd r6+ 96
    inv_rnd r6+ 80
    inv_rnd r6+ 64
    inv_rnd r6+ 48
    inv_rnd r6+ 32
    inv_rnd r6+ 16
    inv_rnd r6, _t_il       ; last round uses a different table

; move final values to the output array.

    mov     r6,[esp+out_blk+stk_spc]
    mov     [r6+12],r3
    mov     [r6+8],r2
    mov     [r6+4],r1
    mov     [r6],r0
    xor     eax,eax
.4: mov     ebp,[esp+20]
    mov     ebx,[esp+16]
    mov     esi,[esp+12]
    mov     edi,[esp+ 8]
    lea     esp,[esp+stk_spc]
    do_ret

%endif

    end