lex_config.c

pcmcia source code

#line 5 "lex_config.l"
/*
 * lex_config.l 1.42 2002/07/02 07:55:27
 *
 * The contents of this file are subject to the Mozilla Public License
 * Version 1.1 (the "License"); you may not use this file except in
 * compliance with the License. You may obtain a copy of the License
 * at http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS"
 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
 * the License for the specific language governing rights and
 * limitations under the License. 
 *
 * The initial developer of the original code is David A. Hinds
 * <[e-mail]>.  Portions created by David A. Hinds
 * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
 *
 * Alternatively, the contents of this file may be used under the
 * terms of the GNU General Public License version 2 (the "GPL"), in
 * which case the provisions of the GPL are applicable instead of the
 * above.  If you wish to allow the use of your version of this file
 * only under the terms of the GPL and not to allow others to use
 * your version of this file under the MPL, indicate your decision by
 * deleting the provisions above and replace them with the notice and
 * other provisions required by the GPL.  If you do not delete the
 * provisions above, a recipient may use your version of this file
 * under either the MPL or the GPL.
 */

#undef src
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <syslog.h>
#ifdef __GLIBC__
#include <wordexp.h>
#else
#include <glob.h>
#endif
#define src 1

#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>

#include "yacc_config.h"

/* For assembling nice error messages */
char *current_file;
int current_lineno;

static int lex_number(char *s);
static int lex_string(char *s);
static void do_source(char *fn);
static int do_eof(void);


/* Macros after this point can all be overridden by user definitions in
 * section 1.
 */

#ifndef YY_SKIP_YYWRAP
#ifdef __cplusplus
extern "C" int yywrap YY_PROTO(( void ));
#else
extern int yywrap YY_PROTO(( void ));
#endif
#endif

#ifndef YY_NO_UNPUT
static void yyunput YY_PROTO(( int c, char *buf_ptr ));
#endif

#ifndef yytext_ptr
static void yy_flex_strncpy YY_PROTO(( char *, yyconst char *, int ));
#endif

#ifdef YY_NEED_STRLEN
static int yy_flex_strlen YY_PROTO(( yyconst char * ));
#endif

#ifndef YY_NO_INPUT
#ifdef __cplusplus
static int yyinput YY_PROTO(( void ));
#else
static int input YY_PROTO(( void ));
#endif
#endif

#if YY_STACK_USED
static int yy_start_stack_ptr = 0;
static int yy_start_stack_depth = 0;
static int *yy_start_stack = 0;
#ifndef YY_NO_PUSH_STATE
static void yy_push_state YY_PROTO(( int new_state ));
#endif
#ifndef YY_NO_POP_STATE
static void yy_pop_state YY_PROTO(( void ));
#endif
#ifndef YY_NO_TOP_STATE
static int yy_top_state YY_PROTO(( void ));
#endif

#else
#define YY_NO_PUSH_STATE 1
#define YY_NO_POP_STATE 1
#define YY_NO_TOP_STATE 1
#endif

#ifdef YY_MALLOC_DECL
YY_MALLOC_DECL
#else
#if __STDC__
#ifndef __cplusplus
#include <stdlib.h>
#endif
#else
/* Just try to get by without declaring the routines.  This will fail
 * miserably on non-ANSI systems for which sizeof(size_t) != sizeof(int)
 * or sizeof(void*) != sizeof(int).
 */
#endif
#endif

/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
#define YY_READ_BUF_SIZE 8192
#endif

/* Copy whatever the last rule matched to the standard output. */

#ifndef ECHO
/* This used to be an fputs(), but since the string might contain NUL's,
 * we now use fwrite().
 */
#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
#endif

/* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
 * is returned in "result".
 */
#ifndef YY_INPUT
#define YY_INPUT(buf,result,max_size) \
	if ( yy_current_buffer->yy_is_interactive ) \
		{ \
		int c = '*', n; \
		for ( n = 0; n < max_size && \
			     (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
			buf[n] = (char) c; \
		if ( c == '\n' ) \
			buf[n++] = (char) c; \
		if ( c == EOF && ferror( yyin ) ) \
			YY_FATAL_ERROR( "input in flex scanner failed" ); \
		result = n; \
		} \
	else if ( ((result = fread( buf, 1, max_size, yyin )) == 0) \
		  && ferror( yyin ) ) \
		YY_FATAL_ERROR( "input in flex scanner failed" );
#endif

/* No semi-colon after return; correct usage is to write "yyterminate();" -
 * we don't want an extra ';' after the "return" because that will cause
 * some compilers to complain about unreachable statements.
 */
#ifndef yyterminate
#define yyterminate() return YY_NULL
#endif

/* Number of entries by which start-condition stack grows. */
#ifndef YY_START_STACK_INCR
#define YY_START_STACK_INCR 25
#endif

/* Report a fatal error. */
#ifndef YY_FATAL_ERROR
#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
#endif

/* Default declaration of generated scanner - a define so the user can
 * easily add parameters.
 */
#ifndef YY_DECL
#define YY_DECL int yylex YY_PROTO(( void ))
#endif

/* Code executed at the beginning of each rule, after yytext and yyleng
 * have been set up.
 */
#ifndef YY_USER_ACTION
#define YY_USER_ACTION
#endif

/* Code executed at the end of each rule. */
#ifndef YY_BREAK
#define YY_BREAK break;
#endif

#define YY_RULE_SETUP \
	YY_USER_ACTION

YY_DECL
	{
	register yy_state_type yy_current_state;
	register char *yy_cp = NULL, *yy_bp = NULL;
	register int yy_act;

#line 67 "lex_config.l"



	if ( yy_init )
		{
		yy_init = 0;

#ifdef YY_USER_INIT
		YY_USER_INIT;
#endif

		if ( ! yy_start )
			yy_start = 1;	/* first start state */

		if ( ! yyin )
			yyin = stdin;

		if ( ! yyout )
			yyout = stdout;

		if ( ! yy_current_buffer )
			yy_current_buffer =
				yy_create_buffer( yyin, YY_BUF_SIZE );

		yy_load_buffer_state();
		}

	while ( 1 )		/* loops until end-of-file is reached */
		{
		yy_cp = yy_c_buf_p;

		/* Support of yytext. */
		*yy_cp = yy_hold_char;

		/* yy_bp points to the position in yy_ch_buf of the start of
		 * the current run.
		 */
		yy_bp = yy_cp;

		yy_current_state = yy_start;
yy_match:
		do
			{
			register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
			if ( yy_accept[yy_current_state] )
				{
				yy_last_accepting_state = yy_current_state;
				yy_last_accepting_cpos = yy_cp;
				}
			while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
				{
				yy_current_state = (int) yy_def[yy_current_state];
				if ( yy_current_state >= 247 )
					yy_c = yy_meta[(unsigned int) yy_c];
				}
			yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
			++yy_cp;
			}
		while ( yy_base[yy_current_state] != 290 );

yy_find_action:
		yy_act = yy_accept[yy_current_state];
		if ( yy_act == 0 )
			{ /* have to back up */
			yy_cp = yy_last_accepting_cpos;
			yy_current_state = yy_last_accepting_state;
			yy_act = yy_accept[yy_current_state];
			}

		YY_DO_BEFORE_ACTION;


do_action:	/* This label is used only to access EOF actions. */


		switch ( yy_act )
	{ /* beginning of action switch */
			case 0: /* must back up */
			/* undo the effects of YY_DO_BEFORE_ACTION */
			*yy_cp = yy_hold_char;
			yy_cp = yy_last_accepting_cpos;
			yy_current_state = yy_last_accepting_state;
			goto yy_find_action;

case 1:
YY_RULE_SETUP
#line 69 "lex_config.l"
BEGIN(src); return SOURCE;
	YY_BREAK
case 2:
YY_RULE_SETUP
#line 70 "lex_config.l"
/* skip */ ;
	YY_BREAK
case 3:
YY_RULE_SETUP
#line 71 "lex_config.l"
do_source(yytext); BEGIN(INITIAL);
	YY_BREAK
case YY_STATE_EOF(INITIAL):
case YY_STATE_EOF(src):
#line 72 "lex_config.l"
if (do_eof()) yyterminate();
	YY_BREAK
case 4:
YY_RULE_SETUP
#line 74 "lex_config.l"
current_lineno++;
	YY_BREAK
case 5:
YY_RULE_SETUP
#line 75 "lex_config.l"
/* skip */ ;
	YY_BREAK
case 6:
YY_RULE_SETUP
#line 76 "lex_config.l"
/* skip */ ;
	YY_BREAK
case 7:
YY_RULE_SETUP
#line 78 "lex_config.l"
return ANONYMOUS;
	YY_BREAK
case 8:
YY_RULE_SETUP
#line 79 "lex_config.l"
return BIND;
	YY_BREAK
case 9:
YY_RULE_SETUP
#line 80 "lex_config.l"
return CIS;
	YY_BREAK
case 10:
YY_RULE_SETUP
#line 81 "lex_config.l"
return CARD;
	YY_BREAK
case 11:
YY_RULE_SETUP
#line 82 "lex_config.l"
return CLASS;
	YY_BREAK
case 12:
YY_RULE_SETUP
#line 83 "lex_config.l"
return DEFAULT;
	YY_BREAK
case 13:
YY_RULE_SETUP
#line 84 "lex_config.l"
return DEVICE;
	YY_BREAK
case 14:
YY_RULE_SETUP
#line 85 "lex_config.l"
return DTYPE;
	YY_BREAK
case 15:
YY_RULE_SETUP
#line 86 "lex_config.l"
return EXCLUDE;
	YY_BREAK
case 16:
YY_RULE_SETUP
#line 87 "lex_config.l"
return FUNCTION;
	YY_BREAK
case 17:
YY_RULE_SETUP
#line 88 "lex_config.l"
return INCLUDE;
	YY_BREAK
case 18:
YY_RULE_SETUP
#line 89 "lex_config.l"
return IRQ_NO;
	YY_BREAK
case 19:
YY_RULE_SETUP
#line 90 "lex_config.l"
return JEDEC;
	YY_BREAK
case 20:
YY_RULE_SETUP
#line 91 "lex_config.l"
return MANFID;
	YY_BREAK
case 21:
YY_RULE_SETUP
#line 92 "lex_config.l"
return MEMORY;
	YY_BREAK
case 22:
YY_RULE_SETUP
#line 93 "lex_config.l"
return MODULE;
	YY_BREAK
case 23:
YY_RULE_SETUP
#line 94 "lex_config.l"
return MTD;
	YY_BREAK
case 24:
YY_RULE_SETUP
#line 95 "lex_config.l"
return NEEDS_MTD;
	YY_BREAK
case 25:
YY_RULE_SETUP
#line 96 "lex_config.l"
return OPTS;
	YY_BREAK
case 26:
YY_RULE_SETUP
#line 97 "lex_config.l"
return PCI;
	YY_BREAK
case 27:
YY_RULE_SETUP
#line 98 "lex_config.l"
return PORT;
	YY_BREAK
case 28:
YY_RULE_SETUP
#line 99 "lex_config.l"
return REGION;
	YY_BREAK
case 29:
YY_RULE_SETUP
#line 100 "lex_config.l"
return RESERVE;
	YY_BREAK
case 30:
YY_RULE_SETUP
#line 101 "lex_config.l"
return TO;
	YY_BREAK
case 31:
YY_RULE_SETUP
#line 102 "lex_config.l"
return TUPLE;
	YY_BREAK
case 32:
YY_RULE_SETUP
#line 103 "lex_config.l"
return VERSION;
	YY_BREAK
case 33:
YY_RULE_SETUP
#line 105 "lex_config.l"
return lex_number("1");
	YY_BREAK
case 34:
YY_RULE_SETUP
#line 106 "lex_config.l"
return lex_number("2");
	YY_BREAK
case 35:
YY_RULE_SETUP
#line 107 "lex_config.l"
return lex_number("3");
	YY_BREAK
case 36:
YY_RULE_SETUP
#line 108 "lex_config.l"
return lex_number("4");
	YY_BREAK
case 37:
YY_RULE_SETUP
#line 109 "lex_config.l"
return lex_number("5");
	YY_BREAK
case 38:
YY_RULE_SETUP
#line 110 "lex_config.l"
return lex_number("6");
	YY_BREAK
case 39:
YY_RULE_SETUP
#line 111 "lex_config.l"
return lex_number("7");
	YY_BREAK
case 40:
YY_RULE_SETUP
#line 112 "lex_config.l"
return lex_number("8");
	YY_BREAK
case 41:
YY_RULE_SETUP
#line 114 "lex_config.l"
return lex_number(yytext);
	YY_BREAK
case 42:
YY_RULE_SETUP
#line 116 "lex_config.l"
return lex_number(yytext);
	YY_BREAK
case 43:
YY_RULE_SETUP
#line 118 "lex_config.l"
return lex_string(yytext);
	YY_BREAK
case 44:
YY_RULE_SETUP
#line 120 "lex_config.l"
return yytext[0];
	YY_BREAK