adexcept.esp

测试用例

  secInvalGroupID                   {13842} = 'Invalid group ID';
  secInvalLineHandle                {13843} = 'Invalid line handle';
  secInvalLineState                 {13844} = 'Invalid line state';
  secInvalLocation                  {13845} = 'Invalid location';
  secInvalMediaList                 {13846} = 'Invalid media list';
  secInvalMediaMode                 {13847} = 'Invalid media mode';
  secInvalMessageID                 {13848} = 'Invalid message ID';
  secInvalParam                     {13850} = 'Invalid parameter';
  secInvalParkID                    {13851} = 'Invalid park ID';
  secInvalParkMode                  {13852} = 'Invalid park mode';
  secInvalPointer                   {13853} = 'Invalid pointer';
  secInvalPrivSelect                {13854} = 'Invalid privilege select';
  secInvalRate                      {13855} = 'Invalid rate';
  secInvalRequestMode               {13856} = 'Invalid request mode';
  secInvalTerminalID                {13857} = 'Invalid terminal ID';
  secInvalTerminalMode              {13858} = 'Invalid terminal mode';
  secInvalTimeout                   {13859} = 'Invalid timeout';
  secInvalTone                      {13860} = 'Invalid tone';
  secInvalToneList                  {13861} = 'Invalid tone list';
  secInvalToneMode                  {13862} = 'Invalid tone mode';
  secInvalTransferMode              {13863} = 'Invalid transfer mode';
  secLineMapperFailed               {13864} = 'Line mapper failed';
  secNoConference                   {13865} = 'No conference';
  secNoDevice                       {13866} = 'No device';
  secNoDriver                       {13867} = 'No driver';
  secNoMem                          {13868} = 'No memory';
  secNoRequest                      {13869} = 'No request';
  secNotOwner                       {13870} = 'Not owner';
  secNotRegistered                  {13871} = 'Not registered';
  secOperationFailed                {13872} = 'Operation failed';
  secOperationUnavail               {13873} = 'Operation unavailable';
  secRateUnavail                    {13874} = 'Rate unavailable';
  secResourceUnavail                {13875} = 'Resource unavailable';
  secRequestOverrun                 {13876} = 'Request overrun';
  secStructureTooSmall              {13877} = 'Structure too small';
  secTargetNotFound                 {13878} = 'Target not found';
  secTargetSelf                     {13879} = 'Target is self';
  secUninitialized                  {13880} = 'Uninitialized';
  secUserUserInfoTooBig             {13881} = 'User info too big';
  secReinit                         {13882} = 'Reinit failed';
  secAddressBlocked                 {13883} = 'Address blocked';
  secBillingRejected                {13884} = 'Billing rejected';
  secInvalFeature                   {13885} = 'Invalid feature';
  secNoMultipleInstance             {13886} = 'No multiple instance';

  {Apro encounters a few of its own TAPI errors, place these error
   codes after the native TAPI error codes, but leave a little bit
   of room for expansion of the TAPI error codes.}
  secTapiBusy                       {13928} = 'TAPI already open, dialing or answering';
  secTapiNotSet                     {13929} = 'TapiMode not set in TApdComPort';
  secTapiNoSelect                   {13930} = 'No TAPI device selected';
  secTapiLoadFail                   {13931} = 'Failed to find/load TAPI.DLL';
  secTapiGetAddrFail                {13932} = 'Failed to get TAPI address';
  sTAPIdisabled16bit                {13933} = 'TAPI disabled for 16-bit environments';
  secTapiUnexpected                 {13934} = 'Unexpected TAPI error';
  secTapiVoiceNotSupported          {13935} = 'TAPI device does not support voice extensions';
  secTapiWaveFail                   {13936} = 'TAPI wave file error';
  secTapiCIDBlocked                 {13937} = 'Caller ID Blocked';
  secTapiCIDOutOfArea               {13938} = 'Out of Area Call';
  secTapiWaveFormatError            {13939} = 'The selected file is not a wave file';
  secTapiWaveReadError              {13940} = 'Unable to read wave file data';
  secTapiWaveBadFormat              {13941} = 'Unsupported wave format';
  secTapiTranslateFail              {13942} = 'Unable to translate address';
  secTapiWaveDeviceInUse            {13943} = 'Wave device in use';
  secTapiWaveFileExists             {13944} = 'Wave file already exists';
  secTapiWaveNoData                 {13945} = 'No wave data available';

  secVoIPNotSupported               {13950} = 'Voice over IP not available (requires Windows 2000 and above)';
  secVoIPCallBusy                   {13951} = 'Remote was busy';
  secVoIPBadAddress                 {13952} = 'Destination address bad';
  secVoIPNoAnswer                   {13953} = 'Remote did not answer';
  secVoIPCancelled                  {13954} = 'Cancelled';
  secVoIPRejected                   {13955} = 'Remote rejected the call';
  secVoIPFailed                     {13956} = 'General failure';
  secVoIPTapi3NotInstalled          {13957} = 'ITTapi interface failure';
  secVoIPH323NotFound               {13958} = 'H.323 line not found';
  secVoIPTapi3EventFailure          {13959} = 'Event notify failure';

  {RAS error codes}
  secRasLoadFail                    {13980} = 'Failed to find/load RASAPI32.DLL';

  { Logging - It is unlikely that these should change, these strings are }
  { used in the dispatcher log.  Translating them into another language  }
  { could make it difficult for TurboPower Tech Support to decipher it.  }
  { Dispatch type. Instead of duplicating the strings in the different   }
  { language include files, we'll just include a common file here.       }
  {$I AdDispLog.inc}

  {XML strings}
  sIENotInstalled       = 'Cannot open WININET, Microsoft IE required';
  sOpenFileFailed       = 'No se puede abrir el fichero ';
  sFileNotFound         = 'File %s could not be found';
  sAllocSrcMemFailed    = 'No se puede reservar memoria para el fuente XML';
  sHttpReadReqFailed    = 'Ha fallado la petici髇 de lectura Http';
  sHttpDataNotAvail     = 'Los datos Http no est醤 disponibles';
  sHttpReqSendFailed    = 'No se puede enviar la petici髇 Http';
  sHttpReqOpenFailed    = 'No se puede abrir la petici髇 Http';
  sInetConnectFailed    = 'No se puede establecer la conexi髇 Internet';
  sInetOpenFailed       = 'No se puede abrir Internet';
  sInvalidFtpLoc        = 'Localizaci髇 ftp no v醠ida';
  sInvalidFtpDir        = 'Directorio ftp no v醠ido';
  sFtpReadReqFailed     = 'Ha fallado la petici髇 de lectura ftp';
  sFtpDataNotAvail      = 'Los datos ftp no est醤 disponibles';
  sFtpOpenFileFailed    = 'No se puede abrir el fichero ftp';
  sFtpPutFileFailed     = 'Could not save file via ftp to %s';            
  sSrcLoadFailed        = 'No se puede cargar el fuente ';
  sInvalidMemPtr        = 'Puntero de memoria no v醠ido';
  sFmtErrorMsg          = 'L韓ea: %d Columna: %d Error: %s';
  sIndexOutOfBounds     = 'ERROR: 蚇DICE FUERA DE RANGO';
  sExpMarkupDecl        = 'Se esperaba una declaraci髇 de etiquetado';
  sIllAttrType          = 'Tipo de atributo incorrecto';
  sIllAttrDefKeyw       = 'Valor por defecto del atributo incorrecto';
  sSysIdMissing         = 'Falta identificador de sistema ';
  sExtModifMissing      = 'Falta modificador externo ';
  sIllCondSectStart     = 'La secci髇 condicional debe comenzar con INCLUDE o con IGNORE';
  sBadSepInModel        = 'Separador incorrecto en el modelo de contenido ';
  sExpCommentOrCDATA    = 'Se esperaba un comentario o una secci髇 CDATA ';
  sUnexpectedEof        = 'Fin de fichero inesperado';
  sMismatchEndTag       = 'Etiqueta de fin sin correspondencia ';
  sIllCharInRef         = 'Car醕ter ilegal en la referencia';
  sUndeclaredEntity     = 'Referencia a una entidad no declarada ';
  sExpectedString       = 'Se esperaba la cadena ';
  sSpaceExpectedAt      = 'Se esperaba espacio en blanco en la posici髇 ';
  sUnexpEndOfInput      = 'Fin de los datos mientras se buscaba un delimitador ';
  sQuoteExpected        = 'Se esperaba " o ' + Chr (39);
  sInvalidXMLVersion    = 'XMLPartner does not support XML specification greater than %s'; 
  sUnableCreateStr      = 'Unable to create stream for input.';
  sInvalidName          = 'Invalid XML name';
  sInvalidCommentText   = 'Invalid comment text';
  sCommentBeforeXMLDecl = 'Document cannot start with a comment if it also contains an XML declaration';
  sInvalidCDataSection  = 'Invalid characters in CDATA section';
  sRedefinedAttr        = 'Attributes cannot be redefined in a start tag';
  sCircularEntRef       = 'Circular reference to: ';
  sInvAttrChar          = 'Invalid character in attribute value: ';
  sInvPCData            = 'Invalid characters in element''s character data: ';
  sDataAfterValDoc      = 'There is invalid data after valid XML document';
  sNoIntConditional     = 'Conditional sections not allowed in internal subset of document type declaration';
  sNotationNotDeclared  = 'Notation not declared: ';
  sInvPubIDChar         = 'Invalid PublicID character: ';
  sNoNDATAInPeDecl      = 'NDATA not allowed in parameter entity declaration';
  sInvStandAloneVal     = 'Standalone value must equal ''yes'' or ''no''';
  sInvEncName           = 'Invalid encoding declaration: ';
  sInvVerNum            = 'Invalid XML version number: ';
  sInvEntityValue       = 'Invalid character in entity value: ';
  sNoCommentInMarkup    = 'Comments can not be placed within other markup';
  sNoPEInIntDTD         = 'Parameter entities not allowed in DTD internal subset';
  sXMLDecNotAtBeg       =  'The XML declaration must appear before the first element';
  sInvalidElementName   = 'Invalid element name: ';
  sBadParamEntNesting   = 'Parameter-entity text must be properly nested: ';
  sInvalidCharEncoding  = 'Invalid character encoding specified.';
  sAttrNotNum           = 'Attribute %s of element %s does not have an integer value.';
  sUnknownAxis          = 'Unknown axis specifier: %s';

  {xpchrstm related errors}
  sInvalidXMLChar       = 'Invalid XML Character found';
  sInvalidBEChar        = 'Invalid (big-endian) UTF-16 character encoding';
  sInvalidLEChar        = 'Invalid (little-endian) UTF-16 character encoding';
  sBadUTF8Char          = 'Badly formed UTF-8 character in stream';
  sErrEndOfDocument     = 'Unexpected end of document stream';
  sUCS_ISOConvertErr    = 'Cannot convert UCS-4 character to ISO-8859-1';
  sUCS_U16ConvertErr    = 'Cannot convert UCS-4 character to UTF-16';
  sUCS_U8ConverErr      = 'Cannot convert UCS-4 character to UTF-8';

  {EModem error string resource}
  sModemDetectedBusy    = 'Line is Busy';
  sModemNoDialtone      = 'No Dialtone';
  sModemNoCarrier       = 'No Carrier';
    
  {TApdPager string resource}
  sInitFail             = 'Modem Initialization Failure';
  sLoginFail            = 'Failed to Login';
  sMinorSrvErr          = 'Minor Server Error';
  sFatalSrvErr          = 'Fatal Server Error';
  sConnected            = 'Modem Connected';
  sCancelled            = 'Cancel Requested';
  sLineBusy             = 'Line Busy';
  sDisconnect           = 'Disconnecing';
  sNoDialtone           = 'No Dialtone';
  sMsgNotSent           = 'Message not sent';
  sWaitingToRedial      = 'Waiting to Redial';
  sLoginPrompt          = 'Received Prompt for Login';
  sLoggedIn             = 'Successful Login';
  sDialing              = 'Now Dialing';
  sRedialing            = 'Now Redialing';
  sLoginRetry           = 'Retry Password for Login';
  sMsgOkToSend          = 'Ready to Send Message';
  sSendingMsg           = 'Now sending Message';
  sMsgAck               = 'Received, Send next block or end';
  sMsgNak               = 'Received Error, Resend Message';
  sMsgRs                = 'Unable to Send Page';
  sMsgCompleted         = 'Page Complete - Logging out if done';
  sSendTimedOut         = 'Timed Out - No Response';
  sLoggingOut           = 'Logging Out';
  sDone                 = 'Done with Page';

  {TApdVoIP error string resource}
  sVoIPNotAvailable     = 'Voice over IP not available (requires Windows 2000 and above)';

  {TFaxLogCode description strings, used by TApdAbstractFax.LogMsg method}
  slfaxNone             = 'none';
  slfaxTransmitStart    = 'transmit started';
  slfaxTransmitOk       = 'transmit finished okay';
  slfaxTransmitFail     = 'transmit failed';
  slfaxReceiveStart     = 'receive started';
  slfaxReceiveOk        = 'receive finished okay';
  slfaxReceiveSkip      = 'receive skipped on request';
  slfaxReceiveFail      = 'receive failed';