📄 yukonnw.ldi
字号:
Do not change this address unless you are
prepared to administer local addresses
according to IEEE 802.2 specifications. Be
careful not to enter a node address that is
already in use by another station."
$MAXFRAMS_DES = "Set the Maximum Frame Size"
$MAXFRAMS_HLP = "Setting the value above 1514 is only effective if you
use an ETHERTSM.NLM that supports Jumbo Frames and
if you load the frame type ETHERNET_II as the first
frame type on the specific adapter."
$QUIET_DES = "QUIET"
$QUIET_HLP = "Using this parameter status messages can be
supressed. This will not affect error messages."
$QUIET_CDES1 = "Suppress driver status messages"
$QUIET_CDES2 = "Don't suppress driver status messages"
$QUIET_CDES3 = "Auto"
$ADVTSKOFF_DES = "Advanced Options for Task Offload"
$ADVTSKOFF_HLP = "Show advanced options for task offload
configuration. Please read the README file before
changing these parameters."
$HWCSUM_DES = "HW Checksum"
$HWCSUM_HLP = "Task offload for computing checksum for Internet
Protocols."
$HWCSUM_CDES1 = "HW Checksum ON"
$HWCSUM_CDES2 = "HW Checksum OFF"
$HWCSUMCAP_DES = "HW Checksum Capabilities"
$HWCSUMCAP_HLP = "Task offload for computing checksum for Internet
Protocols."
$ADVA_DES = "Advanced Options"
$ADVA_HLP = "Show advanced options for port configuration.
Please read the README file before changing these
parameters."
$AUTOA_DES = "Autonegotiation Mode"
$AUTOA_HLP = "Some switches or hubs do not work with
auto-negotiation."
$AUTOA_CDES1 = "Autonegotiation ON"
$AUTOA_CDES2 = "Autonegotiation OFF"
$SPEEDA_DES = "Link Speed Mode"
$SPEEDA_HLP = "This parameter defines the link speed capabilities the
adapter will use for auto-negotiation process.
Changing this parameter may lead to a failed
auto-negotiation process."
$SPEEDA_CDES1 = "Auto"
$SPEEDA_CDES4 = "1000 MBit"
$SPEEDA_CDES3 = " 100 MBit"
$SPEEDA_CDES2 = " 10 MBit"
$ROLEA_DES = "Role in clock generation"
$ROLEA_HLP = "This parameter defines the role of this port
in clock generation."
$ROLEA_CDES1 = "Master"
$ROLEA_CDES2 = "Slave"
$ROLEA_CDES3 = "Auto"
$DUPCAPA_DES = "Duplex Mode Capability"
$DUPCAPA_HLP = "This parameter defines the duplex mode capabilities
the adapter will show on this port in
auto-negotiation process. Changing this parameter
may lead to a failed auto-negotiation process."
$DUPCAPA_CDES1 = "Half- and Full-Duplex"
$DUPCAPA_CDES2 = "Half-Duplex only"
$DUPCAPA_CDES3 = "Full-Duplex only"
$FLWCTLA_DES = "Flow Control Capability"
$FLWCTLA_HLP = "This parameter defines the flow control capabilities
the adapter will show on this port in
auto-negotiation process. Changing this parameter
may lead to a failed auto-negotiation process."
$FLWCTLA_CDES1 = "No Flow Control"
$FLWCTLA_CDES2 = "Asymmetric Flow Control to other station"
$FLWCTLA_CDES3 = "Symmetric Flow Control"
$FLWCTLA_CDES4 = "Symmetric or Asymmetric Flow Control"
$ADVP_DES = "Advanced Options for Paced Packet Batch"
$ADVP_HLP = "Show advanced options for Interrupt Moderation.
Please read the README file before changing these
parameters."
$MODERATE_DES = "Interrupt Moderation Mode"
$MODERATE_HLP = "Determines which interrupts shall be moderated"
$MODERATE_CDES1 = "None"
$MODERATE_CDES2 = "Moderate Receive Interrupts"
$MODERATE_CDES3 = "Moderate Transmit Interrupts"
$MODERATE_CDES4 = "Moderate Receive and Transmit Interrupts"
$MODERATE_CDES5 = "Moderate all Interrupts"
$IRQPS_DES = "Interrupt Rate for Static Moderation."
$IRQPS_HLP = "Specify how many interrupts per second may occur."
$MAXIRQ_DES = "Interrupt Rate for Dynamic Moderation."
$ADVANCED_DES = "Advanced Options for Performance Tuning"
$ADVANCED_HLP = "Show advanced options for performance tuning
Please read the README file before changing these
parameters."
$MODE_HLP = "In polling mode the adapter will not generate
interrupts for every received and transmitted
frame."
$TXCOPYS_DES = "Size of Transmit Copy Buffers"
$TXCOPYS_HLP = "The first fragments of a frame will be copied
together as long as they fit into this buffer.
A value of 0 will disable this feature."
$TXDES1_DES = "Number of Transmit Descriptors"
$RXDES1_DES = "Number of Receive Descriptors"
LANG: 12
;Default: English
$YUKONNW_DES = "Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter"
$YUKONNW_HLP = "This driver supports the Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter."
$NODE_DES = "Node Address"
$NODE_HLP = "This parameter sets the locally administered
address. This address must be unique on the net.
All 12 digits must be entered!
Do not change this address unless you are
prepared to administer local addresses
according to IEEE 802.2 specifications. Be
careful not to enter a node address that is
already in use by another station."
$MAXFRAMS_DES = "Set the Maximum Frame Size"
$MAXFRAMS_HLP = "Setting the value above 1514 is only effective if you
use an ETHERTSM.NLM that supports Jumbo Frames and
if you load the frame type ETHERNET_II as the first
frame type on the specific adapter."
$QUIET_DES = "QUIET"
$QUIET_HLP = "Using this parameter status messages can be
supressed. This will not affect error messages."
$QUIET_CDES1 = "Suppress driver status messages"
$QUIET_CDES2 = "Don't suppress driver status messages"
$QUIET_CDES3 = "Auto"
$ADVTSKOFF_DES = "Advanced Options for Task Offload"
$ADVTSKOFF_HLP = "Show advanced options for task offload
configuration. Please read the README file before
changing these parameters."
$HWCSUM_DES = "HW Checksum"
$HWCSUM_HLP = "Task offload for computing checksum for Internet
Protocols."
$HWCSUM_CDES1 = "HW Checksum ON"
$HWCSUM_CDES2 = "HW Checksum OFF"
$HWCSUMCAP_DES = "HW Checksum Capabilities"
$HWCSUMCAP_HLP = "Task offload for computing checksum for Internet
Protocols."
$ADVA_DES = "Advanced Options"
$ADVA_HLP = "Show advanced options for port configuration.
Please read the README file before changing these
parameters."
$AUTOA_DES = "Autonegotiation Mode"
$AUTOA_HLP = "Some switches or hubs do not work with
auto-negotiation."
$AUTOA_CDES1 = "Autonegotiation ON"
$AUTOA_CDES2 = "Autonegotiation OFF"
$SPEEDA_DES = "Link Speed Mode"
$SPEEDA_HLP = "This parameter defines the link speed capabilities the
adapter will use for auto-negotiation process.
Changing this parameter may lead to a failed
auto-negotiation process."
$SPEEDA_CDES1 = "Auto"
$SPEEDA_CDES4 = "1000 MBit"
$SPEEDA_CDES3 = " 100 MBit"
$SPEEDA_CDES2 = " 10 MBit"
$ROLEA_DES = "Role in clock generation"
$ROLEA_HLP = "This parameter defines the role of this port
in clock generation."
$ROLEA_CDES1 = "Master"
$ROLEA_CDES2 = "Slave"
$ROLEA_CDES3 = "Auto"
$DUPCAPA_DES = "Duplex Mode Capability"
$DUPCAPA_HLP = "This parameter defines the duplex mode capabilities
the adapter will show on this port in
auto-negotiation process. Changing this parameter
may lead to a failed auto-negotiation process."
$DUPCAPA_CDES1 = "Half- and Full-Duplex"
$DUPCAPA_CDES2 = "Half-Duplex only"
$DUPCAPA_CDES3 = "Full-Duplex only"
$FLWCTLA_DES = "Flow Control Capability"
$FLWCTLA_HLP = "This parameter defines the flow control capabilities
the adapter will show on this port in
auto-negotiation process. Changing this parameter
may lead to a failed auto-negotiation process."
$FLWCTLA_CDES1 = "No Flow Control"
$FLWCTLA_CDES2 = "Asymmetric Flow Control to other station"
$FLWCTLA_CDES3 = "Symmetric Flow Control"
$FLWCTLA_CDES4 = "Symmetric or Asymmetric Flow Control"
$ADVP_DES = "Advanced Options for Paced Packet Batch"
$ADVP_HLP = "Show advanced options for Interrupt Moderation.
Please read the README file before changing these
parameters."
$MODERATE_DES = "Interrupt Moderation Mode"
$MODERATE_HLP = "Determines which interrupts shall be moderated"
$MODERATE_CDES1 = "None"
$MODERATE_CDES2 = "Moderate Receive Interrupts"
$MODERATE_CDES3 = "Moderate Transmit Interrupts"
$MODERATE_CDES4 = "Moderate Receive and Transmit Interrupts"
$MODERATE_CDES5 = "Moderate all Interrupts"
$IRQPS_DES = "Interrupt Rate for Static Moderation."
$IRQPS_HLP = "Specify how many interrupts per second may occur."
$MAXIRQ_DES = "Interrupt Rate for Dynamic Moderation."
$ADVANCED_DES = "Advanced Options for Performance Tuning"
$ADVANCED_HLP = "Show advanced options for performance tuning
Please read the README file before changing these
parameters."
$MODE_HLP = "In polling mode the adapter will not generate
interrupts for every received and transmitted
frame."
$TXCOPYS_DES = "Size of Transmit Copy Buffers"
$TXCOPYS_HLP = "The first fragments of a frame will be copied
together as long as they fit into this buffer.
A value of 0 will disable this feature."
$TXDES1_DES = "Number of Transmit Descriptors"
$RXDES1_DES = "Number of Receive Descriptors"
LANG: 9
;Default: English
$YUKONNW_DES = "Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter"
$YUKONNW_HLP = "This driver supports the Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter."
$NODE_DES = "Node Address"
$NODE_HLP = "This parameter sets the locally administered
address. This address must be unique on the net.
All 12 digits must be entered!
Do not change this address unless you are
prepared to administer local addresses
according to IEEE 802.2 specifications. Be
careful not to enter a node address that is
already in use by another station."
$MAXFRAMS_DES = "Set the Maximum Frame Size"
$MAXFRAMS_HLP = "Setting the value above 1514 is only effective if you
use an ETHERTSM.NLM that supports Jumbo Frames and
if you load the frame type ETHERNET_II as the first
frame type on the specific adapter."
$QUIET_DES = "QUIET"
$QUIET_HLP = "Using this parameter status messages can be
supressed. This will not affect error messages."
$QUIET_CDES1 = "Suppress driver status messages"
$QUIET_CDES2 = "Don't suppress driver status messages"
$QUIET_CDES3 = "Auto"
$ADVTSKOFF_DES = "Advanced Options for Task Offload"
$ADVTSKOFF_HLP = "Show advanced options for task offload
configuration. Please read the README file before
changing these parameters."
$HWCSUM_DES = "HW Checksum"
$HWCSUM_HLP = "Task offload for computing checksum for Internet
Protocols."
$HWCSUM_CDES1 = "HW Checksum ON"
$HWCSUM_CDES2 = "HW Checksum OFF"
$HWCSUMCAP_DES = "HW Checksum Capabilities"
$HWCSUMCAP_HLP = "Task offload for computing checksum for Internet
Protocols."
$ADVA_DES = "Advanced Options"
$ADVA_HLP = "Show advanced options for port configuration.
Please read the README file before changing these
parameters."
$AUTOA_DES = "Autonegotiation Mode"
$AUTOA_HLP = "Some switches or hubs do not work with
auto-negotiation."
$AUTOA_CDES1 = "Autonegotiation ON"
$AUTOA_CDES2 = "Autonegotiation OFF"
$SPEEDA_DES = "Link Speed Mode"
$SPEEDA_HLP = "This parameter defines the link speed capabilities the
adapter will use for auto-negotiation process.
Changing this parameter may lead to a failed
auto-negotiation process."
$SPEEDA_CDES1 = "Auto"
$SPEEDA_CDES4 = "1000 MBit"
$SPEEDA_CDES3 = " 100 MBit"
$SPEEDA_CDES2 = " 10 MBit"
$ROLEA_DES = "Role in clock generation"
$ROLEA_HLP = "This parameter defines the role of this port
in clock generation."
$ROLEA_CDES1 = "Master"
$ROLEA_CDES2 = "Slave"
$ROLEA_CDES3 = "Auto"
$DUPCAPA_DES = "Duplex Mode Capability"
$DUPCAPA_HLP = "This parameter defines the duplex mode capabilities
the adapter will show on this port in
auto-negotiation process. Changing this parameter
may lead to a failed auto-negotiation process."
$DUPCAPA_CDES1 = "Half- and Full-Duplex"
$DUPCAPA_CDES2 = "Half-Duplex only"
$DUPCAPA_CDES3 = "Full-Duplex only"
$FLWCTLA_DES = "Flow Control Capability"
$FLWCTLA_HLP = "This parameter defines the flow control capabilities
the adapter will show on this port in
auto-negotiation process. Changing this parameter
may lead to a failed auto-negotiation process."
$FLWCTLA_CDES1 = "No Flow Control"
$FLWCTLA_CDES2 = "Asymmetric Flow Control to other station"
$FLWCTLA_CDES3 = "Symmetric Flow Control"
$FLWCTLA_CDES4 = "Symmetric or Asymmetric Flow Control"
$ADVP_DES = "Advanced Options for Paced Packet Batch"
$ADVP_HLP = "Show advanced options for Interrupt Moderation.
Please read the README file before changing these
parameters."
$MODERATE_DES = "Interrupt Moderation Mode"
$MODERATE_HLP = "Determines which interrupts shall be moderated"
$MODERATE_CDES1 = "None"
$MODERATE_CDES2 = "Moderate Receive Interrupts"
$MODERATE_CDES3 = "Moderate Transmit Interrupts"
$MODERATE_CDES4 = "Moderate Receive and Transmit Interrupts"
$MODERATE_CDES5 = "Moderate all Interrupts"
$IRQPS_DES = "Interrupt Rate for Static Moderation."
$IRQPS_HLP = "Specify how many interrupts per second may occur."
$MAXIRQ_DES = "Interrupt Rate for Dynamic Moderation."
$ADVANCED_DES = "Advanced Options for Performance Tuning"
$ADVANCED_HLP = "Show advanced options for performance tuning
Please read the README file before changing these
parameters."
$MODE_HLP = "In polling mode the adapter will not generate
interrupts for every received and transmitted
frame."
$TXCOPYS_DES = "Size of Transmit Copy Buffers"
$TXCOPYS_HLP = "The first fragments of a frame will be copied
together as long as they fit into this buffer.
A value of 0 will disable this feature."
$TXDES1_DES = "Number of Transmit Descriptors"
$RXDES1_DES = "Number of Receive Descriptors"
LANG: 10
;Default: English
$YUKONNW_DES = "Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter"
$YUKONNW_HLP = "This driver supports the Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter."
$NODE_DES = "Node Address"
$NODE_HLP = "This parameter sets the locally administered
address. This address must be unique on the net.
All 12 digits must be entered!
Do not change this address unless you are
prepared to administer local addresses
according to IEEE 802.2 specifications. Be
careful not to enter a node address that is
already in use by another station."
$MAXFRAMS_DES = "Set the Maximum Frame Size"
$MAXFRAMS_HLP = "Setting the value above 1514 is only effective if you
use an ETHERTSM.NLM that supports Jumbo Frames and
if you load the frame type ETHERNET_II as the first
frame type on the specific adapter."
$QUIET_DES = "QUIET"
$QUIET_HLP = "Using this parameter status messages can be
supressed. This will not affect error messages."
$QUIET_CDES1 = "Suppress driver status messages"
$QUIET_CDES2 = "Don't suppress driver status messages"
$QUIET_CDES3 = "Auto"
$ADVTSKOFF_DES = "Advanced Options for Task Offload"
$ADVTSKOFF_HLP = "Show advanced options for task offload
configuration. Please read the README file before
changing these parameters."
$HWCSUM_DES = "HW Checksum"
$HWCSUM_HLP = "Task offload for computing checksum for Internet
Protocols."
$HWCSUM_CDES1 = "HW Checksum ON"
$HWCSUM_CDES2 = "HW Checksum OFF"
$HWCSUMCAP_DES = "HW Checksum Capabilities"
$HWCSUMCAP_HLP = "Task offload for computing checksum for Internet
Protocols."
$ADVA_DES = "Advanced Options"
$ADVA_HLP = "Show advanced options for port configuration.
Please read the README file before changing these
parameters."
$AUTOA_DES = "Autonegotiation Mode"
$AUTOA_HLP = "Some switches or hubs do not work with
auto-negotiation."
$AUTOA_CDES1 = "Autonegotiation ON"
$AUTOA_CDES2 = "Autonegotiation OFF"
$SPEEDA_DES = "Link Speed Mode"
$SPEEDA_HLP = "This parameter defines the link speed capabilities the
adapter will use for auto-negotiation process.
Changing this parameter may lead to a failed
auto-negotiation process."
$SPEEDA_CDES1 = "Auto"
$SPEEDA_CDES4 = "1000 MBit"
$SPEEDA_CDES3 = " 100 MBit"
$SPEEDA_CDES2 = " 10 MBit"
$ROLEA_DES = "Role in clock generation"
$ROLEA_HLP = "This parameter defines the role of this port
in clock generation."
$ROLEA_CDES1 = "Master"
$ROLEA_CDES2 = "Slave"
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -