yukonnw.ldi

marvell网卡驱动原代码

;DrIvEr DeScRiPtIoN
;CoPyRiGhT=(C)Copyright Marvell. All rights reserved

VER:	1.16
SYN:	1.00

DR YUKONNW
{
	DES:		$YUKONNW_DES
	HELP:		$YUKONNW_HLP
	PAR:		2.00
	PROD:		'PCI.11AB.4320.*.*.*'
	;@#	SPROD:	'Marvell~Yukon Gigabit Ethernet 10/100/1000Base-T Adapter'
	;@#	CLIENT:	YUKONNW.LAN
	;@#	ALIAS:	YUKONNW.LAN
	FILE:		YUKONNW.LAN
;	OF:			NBI.NLM, MSM.NLM, ETHERTSM.NLM
	TIME:		15

	PR SLOT REQ
	{
		VAL:	1-65535
	}

	PR NODE OPT
	{
		DES:	$NODE_DES
		HELP:	$NODE_HLP
		TYP:	HEX(12)
		VAL:	000000000000-FFFFFFFFFFFF
	}

	FR FrameSelect OPT
	{
		CD:		'Ethernet 802.2'
		CH:		'Ethernet_802.2'
		CD:		'Ethernet 802.3'
		CH:		'Ethernet_802.3'
		CD:		'Ethernet SNAP'
		CH:		'Ethernet_SNAP'
		CD:		'Ethernet II'
		CH:		'Ethernet_II'
		DEF:	1,2
	}

	PR MAXFRAMS OPT
	{
		DES:	$MAXFRAMS_DES
		HELP:	$MAXFRAMS_HLP
		TYP:	DEC(4)
		VAL:	512-9018
		DEF:	1514
		OUT:	'MAXFRAMESIZE=%s'
	}

	LI QUIET OPT
	{
		DES:	$QUIET_DES
		HELP:	$QUIET_HLP
		CD:		$QUIET_CDES1
		CH:		'ON'
		CD:		$QUIET_CDES2
		CH:		'OFF'
		CD:		$QUIET_CDES3
		CH:		'AUTO'
		DEF:	3
		OUT:	'QUIET=%s'
	}

        LI ADVTSKOFF OPT
	{
		DES:	$ADVTSKOFF_DES
		HELP:	$ADVTSKOFF_HLP
		CD:		'YES'
		CH:		''
		CD:		'NO'
		CH:		''
		DEF:	2
		OUT:	''
	}

	LI HWCSUM if (ADVTSKOFF == 2) HID
				els OPT
	{
		DES:	$HWCSUM_DES
		HELP:	$HWCSUM_HLP
		CD:		$HWCSUM_CDES1
		CH:		'ON'
		CD:		$HWCSUM_CDES2
		CH:		'OFF'
		DEF:	1
		OUT:	'HWCSUM=%s'
	}

	PR HWCSUMCAP if (ADVTSKOFF == 2) HID
				els OPT
	{
		DES:	$HWCSUMCAP_DES
		HELP:	$HWCSUMCAP_HLP
		TYP:	HEX(2)
		VAL:	0-FF
		DEF:	FF
		OUT:	'HWCSUMCAP=%s'
	}


	LI ADVA OPT
	{
		DES:	$ADVA_DES
		HELP:	$ADVA_HLP
		CD:		'YES'
		CH:		'ON'
		CD:		'NO'
		CH:		'OFF'
		DEF:	2
		OUT:	''
	}

	LI AUTOA if (ADVA == 2) HID
				els OPT
	{
		DES:	$AUTOA_DES
		HELP:	$AUTOA_HLP
		CD:		$AUTOA_CDES1
		CH:		'ON'
		CD:		$AUTOA_CDES2
		CH:		'OFF'
		DEF:	1
		OUT:	'AUTONEG_A=%s'
	}
	LI SPEEDA if (ADVA == 2) HID
				els OPT
	{
		DES:	$SPEEDA_DES
		HELP:	$SPEEDA_HLP
		CD:		$SPEEDA_CDES1
		CH:		'AUTO'
		CD:		$SPEEDA_CDES2
		CH:		'1000'
		CD:		$SPEEDA_CDES3
		CH:		'100'
		CD:		$SPEEDA_CDES4
		CH:		'10'
		DEF:	1
		OUT:	'SPEED_A=%s'
	}
	
	LI ROLEA if (ADVA == 2) HID
				els OPT
	{
		DES:	$ROLEA_DES
		HELP:	$ROLEA_HLP
		CD:		$ROLEA_CDES1
		CH:		'MASTER'
		CD:		$ROLEA_CDES2
		CH:		'SLAVE'
		CD:		$ROLEA_CDES3
		CH:		'AUTO'
		DEF:	3
		OUT:	'ROLE_A=%s'
	}

	LI DUPCAPA if (ADVA == 2) HID
				els OPT
	{
		DES:	$DUPCAPA_DES
		HELP:	$DUPCAPA_HLP
		CD:		$DUPCAPA_CDES1
		CH:		'BOTH'
		CD:		$DUPCAPA_CDES2
		CH:		'HALF'
		CD:		$DUPCAPA_CDES3
		CH:		'FULL'
		DEF:	1
		OUT:	'DUPCAP_A=%s'
	}
	LI FLWCTLA if (ADVA == 2) HID
				els OPT
	{
		DES:	$FLWCTLA_DES
		HELP:	$FLWCTLA_HLP
		CD:		$FLWCTLA_CDES1
		CH:		'NONE'
		CD:		$FLWCTLA_CDES2
		CH:		'LOCSEND'
		CD:		$FLWCTLA_CDES3
		CH:		'SYM'
		CD:		$FLWCTLA_CDES4
		CH:		'SYMORREM'
		DEF:	4
		OUT:	'FLOWCTRL_A=%s'
	}

	LI ADVP OPT
	{
		DES:	'Paced Packet Batch'
		HELP:	$ADVP_HLP
		CD:		'No Interrupt Moderation'
		CH:		'OFF'
		CD:		'Static Interrupt Moderation'
		CH:		'STATIC'
		CD:		'Dynamic Interrupt Moderation'
		CH:		'DYNAMIC'
		DEF:	1
		OUT:	''
	}

	LI MODERATE if (ADVP == 1) HID
				els REQ
	{
		DES:	$MODERATE_DES
		HELP:	$MODERATE_HLP
		CD:		$MODERATE_CDES1
		CH:		'NONE'
		CD:		$MODERATE_CDES2
		CH:		'RX'
		CD:		$MODERATE_CDES3
		CH:		'TX'
		CD:		$MODERATE_CDES4
		CH:		'BOTH'
		CD:		$MODERATE_CDES5
		CH:		'ALL'
		DEF:	1
		OUT:	'MODERATE=%s'
	}

	PR IRQPS if (ADVP == 2) REQ
				  els HID
	{
		DES:	$IRQPS_DES
		HELP:	$IRQPS_HLP
		TYP:	DEC(5)
		VAL:	1000-15000
		DEF:	5000
		OUT:	'IRQPERSEC=%s'
	}

	PR MAXIRQ if (ADVP == 3) REQ
				  els HID
	{
		DES:	$MAXIRQ_DES
		HELP:	$IRQPS_HLP
		TYP:	DEC(5)
		VAL:	1000-15000
		DEF:	5000
		OUT:	'MAXIRQPERSEC=%s'
	}

	LI ADVANCED OPT
	{
		DES:	$ADVANCED_DES
		HELP:	$ADVANCED_HLP
		CD:		'YES'
		CH:		'YES'
		CD:		'NO'
		CH:		'NO'
		DEF:	2
		OUT:	''
	}

	LI MODE if (ADVANCED == 1) OPT
				  els HID
	{
		DES:	'Mode'
		HELP:	$ADVANCED_HLP
		CD:		'Interrupt Mode'
		CH:		''
		CD:		'Polling Mode'
		CH:		'POLL'
		DEF:	1
		OUT:	'%s'
	}

	PR TXCOPYS if (ADVANCED == 1) OPT
				  els HID
	{
		DES:	$TXCOPYS_DES
		HELP:	$TXCOPYS_HLP
		TYP:	DEC(4)
		VAL:	0-9018
		DEF:	128
		OUT:	'TXCOPYSIZE=%s'
	}

	PR TXDESC1 if (ADVANCED == 1) OPT
				  els HID
	{
		DES:	$TXDES1_DES
		TYP:	DEC(3)
		VAL:	20-200
		DEF:	100
		OUT:	'TXDESC1=%s'
	}

	PR RXDESC1 if (ADVANCED == 1) OPT
				  els HID
	{
		DES:	$RXDES1_DES
		TYP:	DEC(3)
		VAL:	20-200
		DEF:	100
		OUT:	'RXDESC1=%s'
	}
}

DLANG: 4
;Default: English
	$YUKONNW_DES =  "Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter"
	$YUKONNW_HLP =   "This driver supports the Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter."

	$NODE_DES =	"Node Address"
	$NODE_HLP =	"This parameter sets the locally administered
			 address. This address must be unique on the net.
			 All 12 digits must be entered!
			 Do not change this address unless you are
			 prepared to administer local addresses
			 according to IEEE 802.2 specifications. Be
			 careful not to enter a node address that is
			 already in use by another station."
	$MAXFRAMS_DES =	"Set the Maximum Frame Size"
	$MAXFRAMS_HLP =	"Setting the value above 1514 is only effective if you
			 use an ETHERTSM.NLM that supports Jumbo Frames and
			 if you load the frame type ETHERNET_II as the first
			 frame type on the specific adapter."
	$QUIET_DES =	"QUIET"
	$QUIET_HLP =	"Using this parameter status messages can be
			 supressed. This will not affect error messages."
	$QUIET_CDES1 =	"Suppress driver status messages"
	$QUIET_CDES2 =	"Don't suppress driver status messages"
	$QUIET_CDES3 =	"Auto"
	$ADVTSKOFF_DES =	"Advanced Options for Task Offload"
	$ADVTSKOFF_HLP =	"Show advanced options for task offload
                         configuration. Please read the README file before
                         changing these parameters."
	$HWCSUM_DES =	"HW Checksum"
	$HWCSUM_HLP =	"Task offload for computing checksum for Internet
                         Protocols."
	$HWCSUM_CDES1 =	"HW Checksum ON"
	$HWCSUM_CDES2 =	"HW Checksum OFF"
	$HWCSUMCAP_DES =	"HW Checksum Capabilities"
	$HWCSUMCAP_HLP =        "Task offload for computing checksum for Internet
                         Protocols."
	$ADVA_DES =	"Advanced Options"
	$ADVA_HLP =	"Show advanced options for port configuration.
			 Please read the README file before changing these
			 parameters."
	$AUTOA_DES =	"Autonegotiation Mode"
	$AUTOA_HLP =	"Some switches or hubs do not work with
			 auto-negotiation."
	$AUTOA_CDES1 =	"Autonegotiation ON"
	$AUTOA_CDES2 =	"Autonegotiation OFF"
	$SPEEDA_DES =	"Link Speed Mode"
	$SPEEDA_HLP =	"This parameter defines the link speed capabilities the
			adapter will use for auto-negotiation process.
			Changing this parameter may lead to a failed
			auto-negotiation process."
	$SPEEDA_CDES1 =	"Auto"
	$SPEEDA_CDES4 =	"1000 MBit"
	$SPEEDA_CDES3 =	" 100 MBit"
	$SPEEDA_CDES2 =	"  10 MBit"
	$ROLEA_DES =	"Role in clock generation"
	$ROLEA_HLP =	"This parameter defines the role of this port
			 in clock generation."
	$ROLEA_CDES1 =  "Master"
	$ROLEA_CDES2 =  "Slave"
	$ROLEA_CDES3 =  "Auto"
	$DUPCAPA_DES =	"Duplex Mode Capability"
	$DUPCAPA_HLP =	"This parameter defines the duplex mode capabilities
			 the adapter will show on this port in