emx.src

ncurses-5.4

# $Id: emx.src,v 1.8 2003/01/26 01:17:55 tom Exp $
# This is a reformatted copy of the terminfo source for OS/2 EMX from
# Juan Jose Garcia Ripoll <[e-mail]>.
# http://www.arrakis.es/~worm/
#----------------------------------------------------------------------------
#
# This section describes terminal classes and maker brands that are still
# quite common.
#

#### Specials
#
# Special "terminals".  These are used to label tty lines when you don't
# know what kind of terminal is on it.  The characteristics of an unknown
# terminal are the lowest common denominator - they look about like a ti 700.
#

dumb|80-column dumb tty,
	am,
	cols#80,
	bel=^G,
	cr=^M,
	cud1=^J,
	ind=^J,
unknown|unknown terminal type,
	gn,
	use=dumb,
lpr|printer|line printer,
	hc,
	os,
	cols#132,
	lines#66,
	bel=^G,
	cr=^M,
	cub1=^H,
	cud1=^J,
	ff=^L,
	ind=^J,
glasstty|classic glass tty interpreting ASCII control characters,
	am,
	cols#80,
	bel=^G,
	clear=^L,
	cr=^M,
	cub1=^H,
	cud1=^J,
	ht=^I,
	kbs=^H,
	kcub1=^H,
	kcud1=^J,
	nel=^M^J,

#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
#
# See the end-of-file comment for more on these.
#

# The IBM PC alternate character set.  Plug this into any Intel console entry.
# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
# ROM graphics for control characters such as the diamond, up- and down-arrow.
# This works with the System V, Linux, and BSDI consoles.  It's a safe bet this
# will work with any Intel console, they all seem to have inherited \E[11m
# from the ANSI.SYS de-facto standard.
klone+acs|alternate character set for ansi.sys displays,
	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
	rmacs=\E[10m,
	smacs=\E[11m,

# Highlight controls corresponding to the ANSI.SYS standard.  Most
# console drivers for Intel boxes obey these.  Makes the same assumption
# about \E[11m as klone+acs.  True ANSI/ECMA-48 would have <rmso=\E[27m>,
# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
klone+sgr|attribute control for ansi.sys displays,
	blink=\E[5m,
	bold=\E[1m,
	invis=\E[8m,
	rev=\E[7m,
	rmacs=\E[10m,
	rmpch=\E[10m,
	rmso=\E[m,
	rmul=\E[m,
	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
	sgr0=\E[0;10m,
	smacs=\E[11m,
	smpch=\E[11m,
	smso=\E[7m,
	smul=\E[4m,
	use=klone+acs,

# Highlight controls corresponding to the ANSI.SYS standard.  *All*
# console drivers for Intel boxes obey these.  Does not assume \E[11m will
# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
# diamond and arrow characters under curses.
klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
	blink=\E[5m,
	bold=\E[1m,
	invis=\E[8m,
	rev=\E[7m,
	rmacs=\E[10m,
	rmso=\E[m,
	rmul=\E[m,
	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
	sgr0=\E[0;10m,
	smacs=\E[12m,
	smso=\E[7m,
	smul=\E[4m,
	use=klone+acs,

# ANSI.SYS color control.
# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
klone+color|color control for ansi.sys and ISO6429-compatible displays,
	colors#8,
	ncv#3,
	pairs#64,
	op=\E[37;40m,
	setab=\E[4%p1%dm,
	setaf=\E[3%p1%dm,

# This is better than klone+color, it doesn't assume white-on-black as the
# default color pair,  but many `ANSI' terminals don't grok the <op> cap.
ecma+color|color control for ECMA-48-compatible terminals,
	AX,
	colors#8,
	ncv#3,
	pairs#64,
	op=\E[39;49m,
	setab=\E[4%p1%dm,
	setaf=\E[3%p1%dm,

#### ANSI/ECMA-48 terminals and terminal emulators
#
# See near the end of this file for details on ANSI conformance.
# Don't mess with these entries!  Lots of other entries depend on them!
#
# This section lists entries in a least-capable to most-capable order.
# if you're in doubt about what `ANSI' matches yours, try them in that
# order and back off from the first that breaks.

ansi-mini|any ansi terminal with pessimistic assumptions,
	am,
	cols#80,
	it#8,
	lines#24,
	clear=\E[H\E[2J$<50>,
	cub1=\E[D,
	cud1=\E[B,
	cuf1=\E[C,
	cup=\E[%i%p1%d;%p2%dH,
	cuu1=\E[A,
	el=\E[K,
	home=\E[H,
	ht=^I,

#
# ANSI.SYS entries
#
# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
# documentation (except for the keyboard key reassignment feature, which
# doen't fit the <pfkey> model well).  The klone+acs sequences were valid
# though undocumented.  The <pfkey> capability is untested but should work for
# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
# From: Eric S. Raymond <[e-mail]> Nov 7 1995
ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
	am,
	mir,
	msgr,
	xon,
	cols#80,
	lines#25,
	clear=\E[2J,
	cub1=^H,
	cud1=\E[B,
	cuf1=\E[C,
	cup=\E[%i%p1%d;%p2%dH,
	cuu1=\E[A,
	el=\E[k,
	home=\E[H,
	is2=\E[m\E[?7h,
	kcub1=^H,
	kcud1=^J,
	kcuf1=^L,
	kcuu1=^K,
	khome=^^,
	pfkey=\E[0;%p1%{58}%+%d;%p2"%s",
	rc=\E[u,
	rmam=\E[?7l,
	sc=\E[s,
	smam=\E[?7h,
	u6=\E[%i%d;%dR,
	u7=\E[6n,
	use=klone+color,
	use=klone+acs,
	use=klone+sgr,
ansi.sys|ANSI.SYS 3.1 and later versions,
	el=\E[K,
	use=ansi.sys-old,

### EMX termcap.dat compatibility modes
#
# Keypad:	Home=\0G	Up=\0H	PrPag=\0I
#		ka1,kh		kcuu1		kpp,ka3
#
#		Left=\0K	5=\0L		Right=\0M
#		kcub1		kb2		kcuf1
#
#		End=\0O		Down=\0P	NxPag=\0Q
#		kc1,kend	kcud1		kc3,knp
#
#		Ins=\0R		Del=\0S
#		kich1		kdch1
#
# On keyboard with 12 function keys,
#	shifted f-keys: F13-F24
#	control f-keys: F25-F36
#	alt f-keys:     F37-F48
# The shift/control/alt keys do not modify each other, but alt overrides both,
# and control overrides shift.
#
# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
# no_color_video to inform the application that standout(1), underline(2)
# reverse(4) and invisible(64) don't work with color.
emx-base|DOS special keys,
	bce,
	bw,
	it#8,
	ncv#71,
	bel=^G,
	ka1=\0G,
	ka3=\0I,
	kb2=\0L,
	kbs=^H,
	kc1=\0O,
	kc3=\0Q,
	kcbt=\0^O,
	kcub1=\0K,
	kcud1=\0P,
	kcuf1=\0M,
	kcuu1=\0H,
	kdch1=\0S,
	kend=\0O,
	kf1=\0;,
	kf10=\0D,
	kf11=\0\205,
	kf12=\0\206,
	kf13=\0T,
	kf14=\0U,
	kf15=\0V,
	kf16=\0W,
	kf17=\0X,
	kf18=\0Y,
	kf19=\0Z,
	kf2=\0<,
	kf20=\0[,
	kf21=\0\\,
	kf22=\0],
	kf23=\0\207,
	kf24=\0\210,
	kf25=\0\^,
	kf26=\0_,
	kf27=\0`,
	kf28=\0a,
	kf29=\0b,
	kf3=\0=,
	kf30=\0c,
	kf31=\0d,
	kf32=\0e,
	kf33=\0f,
	kf34=\0g,
	kf35=\0\211,
	kf36=\0\212,
	kf37=\0h,
	kf38=\0i,
	kf39=\0j,
	kf4=\0>,
	kf40=\0k,
	kf41=\0l,
	kf42=\0m,
	kf43=\0n,
	kf44=\0o,
	kf45=\0p,
	kf46=\0q,
	kf47=\0\213,
	kf48=\0\214,
	kf5=\0?,
	kf6=\0@,
	kf7=\0A,
	kf8=\0B,
	kf9=\0C,
	khome=\0G,
	kich1=\0R,
	knp=\0Q,
	kpp=\0I,
	use=ansi.sys,
#
# To properly translate termcap.dat -> terminfo.src remember these
# equivalences:
#	ti	<->	smcup	string to start programs using cup(termcap)
#	te	<->	rmcup	string to end programs using cup
#	so	<->	smso	begin standout mode
#	se	<->	rmso	exit standout mode
#	us	<->	smul	begin underline mode
#	ue	<->	rmul	exit underline mode
#	mb	<->	blink	turn on blinking
#	md	<->	bold	turn on extra bright (bold) mode
#	mr	<->	rev	turn on reverse video mode
#	me	<->	sgr0	turn off all atributes
#
# On my terminal, \E[4m looks dim.
ansi-emx|ANSI.SYS color,
	blink=\E[5m,
	bold=\E[1m,
	kmous=\E[M,
	rev=\E[7m,
	rmcup=\E[0m,
	rmso=\E[0m,
	rmul@,
	sgr0=\E[0m,
	smcup=\E[0;37;40m,
	smso=\E[7m,
	smul@,
	use=emx-base,
window|ANSI.SYS window,
	blink=\E[5m,
	bold=\E[1;37;47m,
	rev=\E[1;37;47m,
	rmcup=\E[0m,
	rmso=\E[0;37;40m,
	rmul=\E[0;37;40m,
	sgr0=\E[0;37;40m,
	smcup=\E[0;37;40m,
	smso=\E[1;37;47m,
	smul=\E[1;31;47m,
	use=emx-base,
os2|OS/2-emx ANSI.SYS,
	cub=\E[%p1%dD,
	cub1=\E[D,
	cud=\E[%p1%dB,
	cud1=\E[B,
	cuf=\E[%p1%dC,
	cuf1=\E[C,
	cuu=\E[%p1%dA,
	cuu1=\E[A,
	rc=\E[u,
	sc=\E[s,
	use=ansi-emx,
	use=mono,
mono|ANSI.SYS mono,
	blink=\E[5m,
	bold=\E[1m,
	rev=\E[7m,
	rmcup=\E[0m,
	rmso=\E[m,
	rmul=\E[m,
	sgr0=\E[m,
	smcup=\E[0m,
	smso=\E[1m,
	smul=\E[4m,
	use=emx-base,
# same as mono, but use reverse video for standout (nice for Emacs)
rmono|ANSI.SYS reverse mono,
	smso=\E[7m,
	use=mono,
# same as mono, but use a readable color for underlining
mono2|ANSI.SYS mono2,
	rmul=\E[0m,
	smul=\E[1;31;40m,
	use=mono,
# nice colors for Emacs (white on blue, mode line white on cyan)
ansi-color-2-emx|ANSI.SYS color 2,
	rmcup=\E[0m,
	rmso=\E[0;37;44m,
	rmul=\E[0m,
	sgr0=\E[0;37;44m,
	smcup=\E[0;37;44m,
	smso=\E[1;37;46m,
	smul=\E[1;31;40m,
	use=ansi-emx,
# nice colors for Emacs (white on black, mode line black on cyan)
ansi-color-3-emx|ANSI.SYS color 3,
	rmcup=\E[0m,
	rmso=\E[0m,
	rmul=\E[0m,
	sgr0=\E[0m,
	smcup=\E[0m,
	smso=\E[30;46m,
	smul=\E[1;31;40m,
	use=ansi-emx,

#### X terminal emulators
#
# X10/6.6	11/7/86, minus alternate screen, plus (csr)
# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
# as these seem not to work -- esr)
x10term|vs100-x10|xterm terminal emulator (X10 window system),
	am,
	km,
	mir,
	msgr,
	xenl,
	xon,
	cols#80,
	it#8,
	lines#65,
	bold=\E[1m,
	clear=\E[H\E[2J,
	csr=\E[%i%p1%d;%p2%dr,
	cub1=^H,
	cud1=^J,
	cuf1=\E[C,
	cup=\E[%i%p1%d;%p2%dH,
	cuu1=\E[A,
	dch=\E[%p1%dP,
	dch1=\E[P,
	dl=\E[%p1%dM,
	dl1=\E[M,
	ed=\E[J,
	el=\E[K,
	home=\E[H,
	ht=^I,
	il=\E[%p1%dL,
	il1=\E[L,
	ind=^J,
	is2=\E\E[m\E[?7h\E[?1;4l,
	kbs=^H,
	kcub1=\EOD,
	kcud1=\EOB,
	kcuf1=\EOC,
	kcuu1=\EOA,
	kf1=\EOP,