eisaconf.h

来自「基于组件方式开发操作系统的OSKIT源代码」· C头文件 代码 · 共 117 行

H
117
字号
/* * EISA bus device definitions * * Copyright (c) 1995 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice immediately at the beginning of the file, without modification, *    this list of conditions, and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. Absolutely no warranty of function or purpose is made by the author *    Justin T. Gibbs. * 4. Modifications may be freely made to this file if the above conditions *    are met. * *	$\Id: eisaconf.h,v 1.2.4.2 1996/04/01 00:14:16 gibbs Exp $ */#ifndef _I386_EISA_EISACONF_H_#define _I386_EISA_EISACONF_H_ 1#include <sys/queue.h>#define EISA_SLOTS 10   /* PCI clashes with higher ones.. fix later */#define EISA_SLOT_SIZE 0x1000#define EISA_MFCTR_CHAR0(ID) (char)(((ID>>26) & 0x1F) | '@')  /* Bits 26-30 */#define EISA_MFCTR_CHAR1(ID) (char)(((ID>>21) & 0x1F) | '@')  /* Bits 21-25 */#define EISA_MFCTR_CHAR2(ID) (char)(((ID>>16) & 0x1F) | '@')  /* Bits 16-20 */#define EISA_MFCTR_ID(ID)    (short)((ID>>16) & 0xFF)	      /* Bits 16-31 */#define EISA_PRODUCT_ID(ID)  (short)((ID>>4)  & 0xFFF)        /* Bits  4-15 */#define EISA_REVISION_ID(ID) (u_char)(ID & 0x0F)              /* Bits  0-3  */extern struct linker_set eisadriver_set;typedef u_int32_t eisa_id_t;typedef struct resvaddr {        u_long	addr;				/* start address */        u_long	size;				/* size of reserved area */	int	flags;#define		RESVADDR_NONE		0x00#define		RESVADDR_BITMASK	0x01	/* size is a mask of reserved 						 * bits at addr						 */#define		RESVADDR_RELOCATABLE	0x02	LIST_ENTRY(resvaddr) links;		/* List links */} resvaddr_t;LIST_HEAD(resvlist, resvaddr);struct eisa_ioconf {	int		slot;	struct resvlist	ioaddrs;	/* list of reserved I/O ranges */	struct resvlist maddrs;		/* list of reserved memory ranges */	u_short		irq;		/* bitmask of interrupt */};struct kern_devconf;struct eisa_device;struct eisa_driver {	char*	name;			/* device name */	int	(*probe) __P((void));					/* test whether device is present */	int	(*attach) __P((struct eisa_device *));					/* setup driver for a device */	int	(*shutdown) __P((struct kern_devconf *, int));					/* Return the device to a safe					 * state before shutdown					 */	u_long  *unit;			/* Next available unit */};/* To be replaced by the "super device" generic device structure... */struct eisa_device {	eisa_id_t		id;	u_long			unit;	char*			full_name; /* for use in the probe message */	struct eisa_ioconf	ioconf;	struct eisa_driver*	driver;	struct kern_devconf*	kdc;};void eisa_configure __P((void));struct eisa_device *eisa_match_dev __P((struct eisa_device *, char * (*)(eisa_id_t)));void eisa_reg_start __P((struct eisa_device *));void eisa_reg_end __P((struct eisa_device *));int eisa_add_intr __P((struct eisa_device *, int));int eisa_reg_intr __P((struct eisa_device *, int, void (*)(void *), void *, u_int *, int));int eisa_release_intr __P((struct eisa_device *, int, void (*)(void *)));int eisa_enable_intr __P((struct eisa_device *, int));int eisa_add_iospace __P((struct eisa_device *, u_long, u_long, int));int eisa_reg_iospace __P((struct eisa_device *, resvaddr_t *));int eisa_add_mspace __P((struct eisa_device *, u_long, u_long, int));int eisa_reg_mspace __P((struct eisa_device *, resvaddr_t *));int eisa_registerdev __P((struct eisa_device *, struct eisa_driver *, struct kern_devconf *));struct sysctl_req;extern int eisa_generic_externalize __P(( struct proc *p,					  struct kern_devconf *kdc,					  void *userp,					  size_t l));extern struct kern_devconf kdc_eisa0;#define EISA_EXTERNALLEN (sizeof(struct eisa_device))#endif /* _I386_EISA_EISACONF_H_ */

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?