syscons.h

来自「基于组件方式开发操作系统的OSKIT源代码」· C头文件 代码 · 共 217 行

H
217
字号
/*- * Copyright (c) 1995 Sxren Schmidt * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer *    in this position and unchanged. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products *    derived from this software withough specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *	$\Id: syscons.h,v 1.9.4.2 1996/11/10 16:57:43 nate Exp $ */#ifndef _I386_ISA_SYSCONS_H_#define	_I386_ISA_SYSCONS_H_/* vm things */#define	ISMAPPED(pa, width) \	(((pa) <= (u_long)0x1000 - (width)) \	 || ((pa) >= 0xa0000 && (pa) <= 0x100000 - (width)))#define	pa_to_va(pa)	(KERNBASE + (pa))	/* works if ISMAPPED(pa...) *//* printable chars */#define PRINTABLE(ch)	((ch) > 0x1b || ((ch) > 0x0d && (ch) < 0x1b) \			 || (ch) < 0x07)/* macros for "intelligent" screen update */#define mark_for_update(scp, x)	{\			  	    if ((x) < scp->start) scp->start = (x);\				    else if ((x) > scp->end) scp->end = (x);\				}#define mark_all(scp)		{\				    scp->start = 0;\				    scp->end = scp->xsize * scp->ysize;\				}/* status flags */#define LOCK_KEY_MASK	0x0000F#define LED_MASK	0x00007#define UNKNOWN_MODE	0x00010#define KBD_RAW_MODE	0x00020#define SWITCH_WAIT_REL	0x00040#define SWITCH_WAIT_ACQ	0x00080#define BUFFER_SAVED	0x00100#define CURSOR_ENABLED 	0x00200#define CURSOR_SHOWN 	0x00400#define MOUSE_ENABLED	0x00800#define UPDATE_MOUSE	0x01000/* configuration flags */#define VISUAL_BELL	0x00001#define BLINK_CURSOR	0x00002#define CHAR_CURSOR	0x00004#define XT_KEYBD	0x00010/* video hardware memory addresses */#define VIDEOMEM	0x000A0000/* misc defines */#define FALSE		0#define TRUE		1#define MAX_ESC_PAR 	5#define	LOAD		1#define SAVE		0#define	COL		80#define	ROW		25#define BELL_DURATION	5#define BELL_PITCH	800#define TIMER_FREQ	1193182			/* should be in isa.h */#define CONSOLE_BUFSIZE 1024#define PCBURST		128#define FONT_8		0x001#define FONT_14		0x002#define FONT_16		0x004#define HISTORY_SIZE	100*80/* defines related to hardware addresses */#define	MONO_BASE	0x3B4			/* crt controller base mono */#define	COLOR_BASE	0x3D4			/* crt controller base color */#define MISC		0x3C2			/* misc output register */#define ATC		IO_VGA+0x00		/* attribute controller */#define TSIDX		IO_VGA+0x04		/* timing sequencer idx */#define TSREG		IO_VGA+0x05		/* timing sequencer data */#define PIXMASK		IO_VGA+0x06		/* pixel write mask */#define PALRADR		IO_VGA+0x07		/* palette read address */#define PALWADR		IO_VGA+0x08		/* palette write address */#define PALDATA		IO_VGA+0x09		/* palette data register */#define GDCIDX		IO_VGA+0x0E		/* graph data controller idx */#define GDCREG		IO_VGA+0x0F		/* graph data controller data *//* special characters */#define cntlc		0x03#define cntld		0x04#define bs		0x08#define lf		0x0a#define cr		0x0d#define del		0x7f#define DEAD_CHAR 	0x07			/* char used for cursor */typedef struct term_stat {	int 		esc;			/* processing escape sequence */	int 		num_param;		/* # of parameters to ESC */	int	 	last_param;		/* last parameter # */	int 		param[MAX_ESC_PAR];	/* contains ESC parameters */	int 		cur_attr;		/* current attributes */	int 		std_attr;		/* normal attributes */	int 		rev_attr;		/* reverse attributes */} term_stat;typedef struct scr_stat {	u_short 	*scr_buf;		/* buffer when off screen */	int 		xpos;			/* current X position */	int 		ypos;			/* current Y position */	int 		xsize;			/* X size */	int 		ysize;			/* Y size */	int		start;			/* modified area start */	int		end;			/* modified area end */	term_stat 	term;			/* terminal emulation stuff */	int	 	status;			/* status (bitfield) */	u_short 	*cursor_pos;		/* cursor buffer position */	u_short		cursor_saveunder;	/* saved chars under cursor */	char		cursor_start;		/* cursor start line # */	char		cursor_end;		/* cursor end line # */	u_short		*mouse_pos;		/* mouse buffer position */	u_short		*mouse_oldpos;		/* mouse old buffer position */	u_short		mouse_saveunder[4];	/* saved chars under mouse */	short		mouse_xpos;		/* mouse x coordinate */	short		mouse_ypos;		/* mouse y coordinate */	u_char		mouse_cursor[128];	/* mouse cursor bitmap store */	u_short		bell_duration;	u_short		bell_pitch;	u_char		border;			/* border color */	u_char	 	mode;			/* mode */	u_char		font;			/* font on this screen */	pid_t 		pid;			/* pid of controlling proc */	struct proc 	*proc;			/* proc* of controlling proc */	struct vt_mode 	smode;			/* switch mode */	u_short		*history;		/* circular history buffer */	u_short		*history_head;		/* current head position */	u_short		*history_pos;		/* position shown on screen */	u_short		*history_save;		/* save area index */	int		history_size;		/* size of history buffer */	struct apmhook  r_hook;			/* reconfiguration support */} scr_stat;typedef struct default_attr {	int             std_attr;               /* normal attributes */	int 		rev_attr;		/* reverse attributes */} default_attr;/* function prototypes */int scprobe(struct isa_device *dev);int scattach(struct isa_device *dev);int scopen(dev_t dev, int flag, int mode, struct proc *p);int scclose(dev_t dev, int flag, int mode, struct proc *p);int scread(dev_t dev, struct uio *uio, int flag);int scwrite(dev_t dev, struct uio *uio, int flag);int scparam(struct tty *tp, struct termios *t);int scioctl(dev_t dev, int cmd, caddr_t data, int flag, struct proc *p);void scstart(struct tty *tp);void scintr(int unit);int pcmmap(dev_t dev, int offset, int nprot);static void scinit(void);static u_int scgetc(int noblock);       struct tty *scdevtotty(dev_t dev);static scr_stat *get_scr_stat(dev_t dev);static scr_stat *alloc_scp(void);static void init_scp(scr_stat *scp);static int get_scr_num(void);static void scrn_timer(void);static void clear_screen(scr_stat *scp);static int switch_scr(scr_stat *scp, u_int next_scr);static void exchange_scr(void);static inline void move_crsr(scr_stat *scp, int x, int y);static void scan_esc(scr_stat *scp, u_char c);static inline void draw_cursor(scr_stat *scp, int show);static void ansi_put(scr_stat *scp, u_char *buf, int len);static u_char *get_fstr(u_int c, u_int *len);static void update_leds(int which);static void history_to_screen(scr_stat *scp);static int history_up_line(scr_stat *scp);static int history_down_line(scr_stat *scp);static void kbd_wait(void);static void kbd_cmd(u_char command);static void set_mode(scr_stat *scp);       void set_border(int color);static void set_vgaregs(char *modetable);static void set_font_mode(void);static void set_normal_mode(void);static void copy_font(int operation, int font_type, char* font_image);static void set_destructive_cursor(scr_stat *scp, int force);static void draw_mouse_image(scr_stat *scp);static void save_palette(void);       void load_palette(void);static void do_bell(scr_stat *scp, int pitch, int duration);static void blink_screen(scr_stat *scp);#endif /* !_I386_ISA_SYSCONS_H_ */

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?