scsi_all.h
来自「基于组件方式开发操作系统的OSKIT源代码」· C头文件 代码 · 共 351 行
H
351 行
/* * Largely written by Julian Elischer (julian@tfs.com) * for TRW Financial Systems. * * TRW Financial Systems, in accordance with their agreement with Carnegie * Mellon University, makes this software available to CMU to distribute * or use in any manner that they see fit as long as this message is kept with * the software. For this reason TFS also grants any other persons or * organisations permission to use or modify this software. * * TFS supplies this software to be publicly redistributed * on the understanding that TFS is not responsible for the correct * functioning of this software in any circumstances. * * Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992 * * $\Id: scsi_all.h,v 1.13 1995/05/30 08:13:25 rgrimes Exp $ *//* * SCSI general interface description */#ifndef _SCSI_SCSI_ALL_H#define _SCSI_SCSI_ALL_H 1/* * SCSI command format *//* * Define dome bits that are in ALL (or a lot of) scsi commands */#define SCSI_CTL_LINK 0x01#define SCSI_CTL_FLAG 0x02#define SCSI_CTL_VENDOR 0xC0#define SCSI_CMD_LUN 0xA0 /* these two should not be needed */#define SCSI_CMD_LUN_SHIFT 5 /* LUN in the cmd is no longer SCSI */struct scsi_generic{ u_char opcode; u_char bytes[11];};struct scsi_test_unit_ready{ u_char op_code; u_char byte2; u_char unused[3]; u_char control;};struct scsi_send_diag{ u_char op_code; u_char byte2;#define SSD_UOL 0x01#define SSD_DOL 0x02#define SSD_SELFTEST 0x04#define SSD_PF 0x10 u_char unused[1]; u_char paramlen[2]; u_char control;};struct scsi_sense{ u_char op_code; u_char byte2; u_char unused[2]; u_char length; u_char control;};struct scsi_inquiry{ u_char op_code; u_char byte2; u_char unused[2]; u_char length; u_char control;};struct scsi_mode_sense{ u_char op_code; u_char byte2;#define SMS_DBD 0x08 u_char page;#define SMS_PAGE_CODE 0x3F#define SMS_PAGE_CTRL 0xC0#define SMS_PAGE_CTRL_CURRENT 0x00#define SMS_PAGE_CTRL_CHANGEABLE 0x40#define SMS_PAGE_CTRL_DEFAULT 0x80#define SMS_PAGE_CTRL_SAVED 0xC0 u_char unused; u_char length; u_char control;};struct scsi_mode_sense_big{ u_char op_code; u_char byte2; /* same bits as small version */ u_char page; /* same bits as small version */ u_char unused[4]; u_char length[2]; u_char control;};struct scsi_mode_select{ u_char op_code; u_char byte2;#define SMS_SP 0x01#define SMS_PF 0x10 u_char unused[2]; u_char length; u_char control;};struct scsi_mode_select_big{ u_char op_code; u_char byte2; /* same bits as small version */ u_char unused[5]; u_char length[2]; u_char control;};struct scsi_reserve{ u_char op_code; u_char byte2; u_char unused[2]; u_char length; u_char control;};struct scsi_release{ u_char op_code; u_char byte2; u_char unused[2]; u_char length; u_char control;};struct scsi_prevent{ u_char op_code; u_char byte2; u_char unused[2]; u_char how; u_char control;};#define PR_PREVENT 0x01#define PR_ALLOW 0x00struct scsi_changedef{ u_char op_code; u_char byte2; u_char unused1; u_char how; u_char unused[4]; u_char datalen; u_char control;};#define SC_SCSI_1 0x01#define SC_SCSI_2 0x03/* * Opcodes */#define TEST_UNIT_READY 0x00#define REQUEST_SENSE 0x03#define INQUIRY 0x12#define MODE_SELECT 0x15#define MODE_SENSE 0x1a#define START_STOP 0x1b#define RESERVE 0x16#define RELEASE 0x17#define PREVENT_ALLOW 0x1e#define POSITION_TO_ELEMENT 0x2b#define CHANGE_DEFINITION 0x40#define MODE_SENSE_BIG 0x54#define MODE_SELECT_BIG 0x55#define MOVE_MEDIUM 0xa5#define READ_ELEMENT_STATUS 0xb8/* * sense data format */#define T_DIRECT 0#define T_SEQUENTIAL 1#define T_PRINTER 2#define T_PROCESSOR 3#define T_WORM 4#define T_READONLY 5#define T_SCANNER 6#define T_OPTICAL 7#define T_CHANGER 8#define T_COMM 9#define T_ASC0 10#define T_ASC1 11#define T_TARGET 12#define T_UNKNOWN 13#define T_NTYPES 14#define T_NODEVICE 0x1F#define T_REMOV 1#define T_FIXED 0struct scsi_inquiry_data{ u_char device;#define SID_TYPE 0x1F#define SID_QUAL 0xE0#define SID_QUAL_LU_OK 0x00#define SID_QUAL_LU_OFFLINE 0x20#define SID_QUAL_RSVD 0x40#define SID_QUAL_BAD_LU 0x60 u_char dev_qual2;#define SID_QUAL2 0x7F#define SID_REMOVABLE 0x80 u_char version;#define SID_ANSII 0x07#define SID_ECMA 0x38#define SID_ISO 0xC0 u_char response_format; u_char additional_length; u_char unused[2]; u_char flags;#define SID_SftRe 0x01#define SID_CmdQue 0x02#define SID_Linked 0x08#define SID_Sync 0x10#define SID_WBus16 0x20#define SID_WBus32 0x40#define SID_RelAdr 0x80 char vendor[8]; char product[16]; char revision[4]; u_char extra[8];};struct scsi_sense_data{/* 1*/ u_char error_code; /* same bits as new version */ union { struct {/* 2*/ u_char blockhi;/* 3*/ u_char blockmed;/* 4*/ u_char blocklow; } unextended; struct {/* 2*/ u_char segment;/* 3*/ u_char flags; /* same bits as new version *//* 7*/ u_char info[4];/* 8*/ u_char extra_len; /* allocate enough room to hold new stuff ( by increasing 16 to 24 below) *//*32*/ u_char extra_bytes[24]; } extended; }ext;}; /* total of 32 bytes */struct scsi_sense_extended{/* 2*/ u_char segment;/* 3*/ u_char flags;#define SSD_KEY 0x0F#define SSD_ILI 0x20#define SSD_EOM 0x40#define SSD_FILEMARK 0x80/* 7*/ u_char info[4];/* 8*/ u_char extra_len;/*12*/ u_char cmd_spec_info[4];/*13*/ u_char add_sense_code;/*14*/ u_char add_sense_code_qual;/*15*/ u_char fru;/*16*/ u_char sense_key_spec_1;#define SSD_SCS_VALID 0x80/*17*/ u_char sense_key_spec_2;/*18*/ u_char sense_key_spec_3;/*32*/ u_char extra_bytes[14];};struct scsi_sense_data_new{/* 1*/ u_char error_code;#define SSD_ERRCODE 0x7F#define SSD_ERRCODE_VALID 0x80 union { struct /* this is deprecated, the standard says "DON'T"*/ {/* 2*/ u_char blockhi;/* 3*/ u_char blockmed;/* 4*/ u_char blocklow; } unextended; struct scsi_sense_extended extended; } ext;}; /* total of 32 bytes */struct blk_desc{ u_char density; u_char nblocks[3]; u_char reserved; u_char blklen[3];};struct scsi_mode_header{ u_char data_length; /* Sense data length */ u_char medium_type; u_char dev_spec; u_char blk_desc_len;};struct scsi_mode_header_big{ u_char data_length[2]; /* Sense data length */ u_char medium_type; u_char dev_spec; u_char unused[2]; u_char blk_desc_len[2];};/* * Status Byte */#define SCSI_OK 0x00#define SCSI_CHECK 0x02#define SCSI_BUSY 0x08#define SCSI_INTERM 0x10#define SCSI_QUEUE_FULL 0x28#endif /*_SCSI_SCSI_ALL_H*/
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?