adwmcode.h

来自「基于组件方式开发操作系统的OSKIT源代码」· C头文件 代码 · 共 127 行

H
127
字号
/* * Exported interface to downloadable microcode for AdvanSys SCSI Adapters * *	$Id: adwmcode.h,v 1.1 1998/10/07 03:20:47 gibbs Exp $ * * Obtained from: * * Copyright (c) 1995-1998 Advanced System Products, Inc. * All Rights Reserved. *    * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that redistributions of source * code retain the above copyright notice and this comment without * modification. */#ifndef _ADMCODE_H_#define _ADMCODE_H_extern u_int16_t adw_mcode[];extern u_int16_t adw_mcode_size;extern u_int32_t adw_mcode_chksum;/* * Fixed LRAM locations of microcode operating variables. */#define ADW_MC_CODE_BEGIN_ADDR		0x0028 /* microcode start address */#define ADW_MC_CODE_END_ADDR		0x002A /* microcode end address */#define ADW_MC_CODE_CHK_SUM		0x002C /* microcode code checksum */#define ADW_MC_STACK_BEGIN		0x002E /* microcode stack begin */#define ADW_MC_STACK_END		0x0030 /* microcode stack end */#define ADW_MC_VERSION_DATE		0x0038 /* microcode version */#define ADW_MC_VERSION_NUM		0x003A /* microcode number */#define ADW_MC_BIOSMEM			0x0040 /* BIOS RISC Memory Start */#define ADW_MC_BIOSLEN			0x0050 /* BIOS RISC Memory Length */#define ADW_MC_HALTCODE			0x0094 /* microcode halt code */#define ADW_MC_CALLERPC			0x0096 /* microcode halt caller PC */#define ADW_MC_ADAPTER_SCSI_ID		0x0098 /* one ID byte + reserved */#define ADW_MC_ULTRA_ABLE		0x009C#define ADW_MC_SDTR_ABLE		0x009E#define ADW_MC_TAGQNG_ABLE		0x00A0#define ADW_MC_DISC_ENABLE		0x00A2#define ADW_MC_IDLE_CMD			0x00A6#define ADW_MC_IDLE_PARA_STAT		0x00A8#define ADW_MC_DEFAULT_SCSI_CFG0	0x00AC#define ADW_MC_DEFAULT_SCSI_CFG1	0x00AE#define ADW_MC_DEFAULT_MEM_CFG		0x00B0#define ADW_MC_DEFAULT_SEL_MASK		0x00B2#define ADW_MC_RISC_NEXT_READY		0x00B4#define ADW_MC_RISC_NEXT_DONE		0x00B5#define ADW_MC_SDTR_DONE		0x00B6#define ADW_MC_NUMBER_OF_QUEUED_CMD	0x00C0#define ADW_MC_NUMBER_OF_MAX_CMD	0x00D0#define ADW_MC_DEVICE_HSHK_CFG_TABLE	0x0100#define 	ADW_HSHK_CFG_WIDE_XFR	0x8000#define		ADW_HSHK_CFG_RATE_MASK	0x0F00#define		ADW_HSHK_CFG_RATE_SHIFT	8#define ADW_HSHK_CFG_PERIOD_FACTOR(cfg_val)	\((((((cfg_val) & ADW_HSHK_CFG_RATE_MASK) >> ADW_HSHK_CFG_RATE_SHIFT) \								* 25) + 50)/4)#define		ADW_HSHK_CFG_OFFSET	0x001F#define ADW_MC_WDTR_ABLE		0x0120 /* Wide Transfer TID bitmask. */#define ADW_MC_CONTROL_FLAG		0x0122 /* Microcode control flag. */#define		ADW_MC_CONTROL_IGN_PERR 0x0001 /* Ignore DMA Parity Errors */#define ADW_MC_WDTR_DONE		0x0124#define ADW_MC_HOST_NEXT_READY		0x0128 /* Host Next Ready RQL Entry. */#define ADW_MC_HOST_NEXT_DONE		0x0129 /* Host Next Done RQL Entry. *//* * LRAM RISC Queue Lists (LRAM addresses 0x1200 - 0x19FF) * * Each of the 255 Adv Library/Microcode RISC queue lists or mailboxes  * starting at LRAM address 0x1200 is 8 bytes and has the following * structure. Only 253 of these are actually used for command queues. */#define ADW_MC_RISC_Q_LIST_BASE		0x1200#define ADW_MC_RISC_Q_LIST_SIZE		0x0008#define ADW_MC_RISC_Q_TOTAL_CNT		0x00FF /* Num. queue slots in LRAM. */#define ADW_MC_RISC_Q_FIRST		0x0001#define ADW_MC_RISC_Q_LAST		0x00FF/* RISC Queue List structure - 8 bytes */#define RQL_FWD		0 /* forward pointer (1 byte) */#define RQL_BWD		1 /* backward pointer (1 byte) */#define RQL_STATE	2 /* state byte - free, ready, done, aborted (1 byte) */#define RQL_TID		3 /* request target id (1 byte) */#define RQL_PHYADDR	4 /* request physical pointer (4 bytes) */     /* RISC Queue List state values */#define ADW_MC_QS_FREE			0x00#define ADW_MC_QS_READY			0x01#define ADW_MC_QS_DONE			0x40#define ADW_MC_QS_ABORTED		0x80/* RISC Queue List pointer values */#define ADW_MC_NULL_Q			0x00#define ADW_MC_BIOS_Q			0xFF/* ADW_SCSI_REQ_Q 'cntl' field values */#define ADW_MC_QC_START_MOTOR		0x02	/* Issue start motor. */#define ADW_MC_QC_NO_OVERRUN		0x04	/* Don't report overrun. */#define ADW_MC_QC_FIRST_DMA		0x08	/* Internal microcode flag. */#define ADW_MC_QC_ABORTED		0x10	/* Request aborted by host. */#define ADW_MC_QC_REQ_SENSE		0x20	/* Auto-Request Sense. */#define ADW_MC_QC_DOS_REQ		0x80	/* Request issued by DOS. *//* * Microcode idle loop commands */typedef enum {	ADW_IDLE_CMD_COMPLETED		= 0x0000,	ADW_IDLE_CMD_STOP_CHIP		= 0x0001,	ADW_IDLE_CMD_STOP_CHIP_SEND_INT	= 0x0002,	ADW_IDLE_CMD_SEND_INT		= 0x0004,	ADW_IDLE_CMD_ABORT		= 0x0008,	ADW_IDLE_CMD_DEVICE_RESET	= 0x0010,	ADW_IDLE_CMD_SCSI_RESET		= 0x0020} adw_idle_cmd_t;typedef enum {	ADW_IDLE_CMD_FAILURE		= 0x0000,	ADW_IDLE_CMD_SUCCESS		= 0x0001} adw_idle_cmd_status_t;#endif /* _ADMCODE_H_ */

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?