if_fxpvar.h

来自「基于组件方式开发操作系统的OSKIT源代码」· C头文件 代码 · 共 115 行

H
115
字号
/*                   * Copyright (c) 1995, David Greenman * All rights reserved. *               * Modifications to support NetBSD: * Copyright (c) 1997 Jason R. Thorpe.  All rights reserved. *                   * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met:              * 1. Redistributions of source code must retain the above copyright *    notice unmodified, this list of conditions, and the following *    disclaimer.   * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * *	$Id: if_fxpvar.h,v 1.6 1998/08/02 00:29:15 dg Exp $ *//* * Misc. defintions for the Intel EtherExpress Pro/100B PCI Fast * Ethernet driver *//* * NOTE: Elements are ordered for optimal cacheline behavior, and NOT *	 for functional grouping. */struct fxp_softc {#if defined(__NetBSD__)	struct device sc_dev;		/* generic device structures */	void *sc_ih;			/* interrupt handler cookie */	bus_space_tag_t sc_st;		/* bus space tag */	bus_space_handle_t sc_sh;	/* bus space handle */	struct ethercom sc_ethercom;	/* ethernet common part */#else	struct arpcom arpcom;		/* per-interface network data */	caddr_t csr;			/* control/status registers */#endif /* __NetBSD__ */	struct mbuf *rfa_headm;		/* first mbuf in receive frame area */	struct mbuf *rfa_tailm;		/* last mbuf in receive frame area */	struct fxp_cb_tx *cbl_first;	/* first active TxCB in list */	int tx_queued;			/* # of active TxCB's */	int need_mcsetup;		/* multicast filter needs programming */	struct fxp_cb_tx *cbl_last;	/* last active TxCB in list */	struct fxp_stats *fxp_stats;	/* Pointer to interface stats */	int rx_idle_secs;		/* # of seconds RX has been idle */	struct callout_handle stat_ch;	/* Handle for canceling our stat timeout */	struct fxp_cb_tx *cbl_base;	/* base of TxCB list */	struct fxp_cb_mcs *mcsp;	/* Pointer to mcast setup descriptor */	int all_mcasts;			/* receive all multicasts */	struct ifmedia sc_media;	/* media information */	int phy_primary_addr;		/* address of primary PHY */	int phy_primary_device;		/* device type of primary PHY */	int phy_10Mbps_only;		/* PHY is 10Mbps-only device */};/* Macros to ease CSR access. */#if defined(__NetBSD__)#define	CSR_READ_1(sc, reg)						\	bus_space_read_1((sc)->sc_st, (sc)->sc_sh, (reg))#define	CSR_READ_2(sc, reg)						\	bus_space_read_2((sc)->sc_st, (sc)->sc_sh, (reg))#define	CSR_READ_4(sc, reg)						\	bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg))#define	CSR_WRITE_1(sc, reg, val)					\	bus_space_write_1((sc)->sc_st, (sc)->sc_sh, (reg), (val))#define	CSR_WRITE_2(sc, reg, val)					\	bus_space_write_2((sc)->sc_st, (sc)->sc_sh, (reg), (val))#define	CSR_WRITE_4(sc, reg, val)					\	bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (val))#else#define	CSR_READ_1(sc, reg)						\	(*((u_int8_t *)((sc)->csr + (reg))))#define	CSR_READ_2(sc, reg)						\	(*((u_int16_t *)((sc)->csr + (reg))))#define	CSR_READ_4(sc, reg)						\	(*((u_int32_t *)((sc)->csr + (reg))))#define	CSR_WRITE_1(sc, reg, val)					\	(*((u_int8_t *)((sc)->csr + (reg)))) = (val)#define	CSR_WRITE_2(sc, reg, val)					\	(*((u_int16_t *)((sc)->csr + (reg)))) = (val)#define	CSR_WRITE_4(sc, reg, val)					\	(*((u_int32_t *)((sc)->csr + (reg)))) = (val)#endif /* __NetBSD__ *//* Deal with slight differences in software interfaces. */#if defined(__NetBSD__)#define	sc_if			sc_ethercom.ec_if#define	FXP_FORMAT		"%s"#define	FXP_ARGS(sc)		(sc)->sc_dev.dv_xname#define	FXP_INTR_TYPE		int#define	FXP_IOCTLCMD_TYPE	u_long#define	FXP_BPFTAP_ARG(ifp)	(ifp)->if_bpf#else /* __FreeBSD__ */#define	sc_if			arpcom.ac_if#define	FXP_FORMAT		"fxp%d"#define	FXP_ARGS(sc)		(sc)->arpcom.ac_if.if_unit#define	FXP_INTR_TYPE		void#define	FXP_IOCTLCMD_TYPE	u_long#define	FXP_BPFTAP_ARG(ifp)	ifp#endif /* __NetBSD__ */

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?