📄 pci_compat.c
字号:
/* * Copyright (c) 1997, Stefan Esser <se@freebsd.org> * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $Id: pci_compat.c,v 1.20.2.2 1999/05/08 00:28:13 julian Exp $ * */#include "pci.h"#if NPCI > 0/* for compatibility to FreeBSD-2.2 version of PCI code */#include <sys/param.h>#include <sys/systm.h>#include <sys/malloc.h>#include <sys/linker_set.h>#include <vm/vm.h>#include <vm/pmap.h>#include <sys/interrupt.h>#include <pci/pcireg.h>#include <pci/pcivar.h>#ifdef RESOURCE_CHECK#include <sys/drvresource.h>#endif#ifdef APIC_IO#include <machine/smp.h>#endif#ifdef PCI_COMPAT/* ------------------------------------------------------------------------- */static intpci_mapno(pcicfgregs *cfg, int reg){ int i, nummaps; pcimap *map; nummaps = cfg->nummaps; map = cfg->map; for (i = 0; i < nummaps; i++) if (map[i].reg == reg) return (i); return (-1);}static intpci_porten(pcicfgregs *cfg){ return ((cfg->cmdreg & PCIM_CMD_PORTEN) != 0);}static intpci_isportmap(pcicfgregs *cfg, int map){ return ((unsigned)map < cfg->nummaps && (cfg->map[map].type & PCI_MAPPORT) != 0);}static intpci_memen(pcicfgregs *cfg){ return ((cfg->cmdreg & PCIM_CMD_MEMEN) != 0);}static intpci_ismemmap(pcicfgregs *cfg, int map){ return ((unsigned)map < cfg->nummaps && (cfg->map[map].type & PCI_MAPMEM) != 0);}/* ------------------------------------------------------------------------- */u_longpci_conf_read(pcici_t tag, u_long reg){ return (pci_cfgread(tag, reg, 4));}voidpci_conf_write(pcici_t tag, u_long reg, u_long data){ pci_cfgwrite(tag, reg, data, 4);}int pci_map_port(pcici_t cfg, u_long reg, pci_port_t* pa){ int map; map = pci_mapno(cfg, reg); if (pci_porten(cfg) && pci_isportmap(cfg, map)) { u_int32_t iobase; u_int32_t iosize; iobase = cfg->map[map].base; iosize = 1 << cfg->map[map].ln2size;#ifdef RESOURCE_CHECK if (resource_claim(cfg, REST_PORT, RESF_NONE, iobase, iobase + iosize -1) == 0)#endif /* RESOURCE_CHECK */ { *pa = iobase; return (1); } } return (0);}int pci_map_mem(pcici_t cfg, u_long reg, vm_offset_t* va, vm_offset_t* pa){ int map; map = pci_mapno(cfg, reg); if (pci_memen(cfg) && pci_ismemmap(cfg, map)) { u_int32_t paddr; u_int32_t psize; paddr = cfg->map[map].base; psize = 1 << cfg->map[map].ln2size;#ifdef RESOURCE_CHECK if (resource_claim(cfg, REST_MEM, RESF_NONE, paddr, paddr + psize -1) == 0)#endif /* RESOURCE_CHECK */ { u_int32_t poffs; vm_offset_t vaddr; poffs = paddr - trunc_page(paddr);#ifdef __i386__ vaddr = (vm_offset_t)pmap_mapdev(paddr-poffs, psize+poffs);#endif#ifdef __alpha__ vaddr = paddr-poffs;#endif if (vaddr != NULL) { vaddr += poffs; *va = vaddr; *pa = paddr; return (1); } } } return (0);}int pci_map_dense(pcici_t cfg, u_long reg, vm_offset_t* va, vm_offset_t* pa){ if(pci_map_mem(cfg, reg, va, pa)){#ifdef __alpha__ vm_offset_t dense; if(dense = pci_cvt_to_dense(*pa)){ *pa = dense; *va = ALPHA_PHYS_TO_K0SEG(*pa); return (1); }#endif#ifdef __i386__ return(1);#endif } return (0);}int pci_map_bwx(pcici_t cfg, u_long reg, vm_offset_t* va, vm_offset_t* pa){ if(pci_map_mem(cfg, reg, va, pa)){#ifdef __alpha__ vm_offset_t bwx; if(bwx = pci_cvt_to_bwx(*pa)){ *pa = bwx; *va = ALPHA_PHYS_TO_K0SEG(*pa); return (1); }#endif#ifdef __i386__ return(1);#endif } return (0);}intpci_map_int(pcici_t cfg, pci_inthand_t *handler, void *arg, intrmask_t *maskptr){ return (pci_map_int_right(cfg, handler, arg, maskptr, 0));}intpci_map_int_right(pcici_t cfg, pci_inthand_t *handler, void *arg, intrmask_t *maskptr, u_int flags){ int error;#ifdef APIC_IO int nextpin, muxcnt;#endif if (cfg->intpin != 0) { int irq = cfg->intline; void *dev_instance = (void *)-1; /* XXX use cfg->devdata */ void *idesc; idesc = intr_create(dev_instance, irq, handler, arg, maskptr, flags); error = intr_connect(idesc); if (error != 0) return 0;#ifdef APIC_IO nextpin = next_apic_irq(irq); if (nextpin < 0) return 1; /* * Attempt handling of some broken mp tables. * * It's OK to yell (since the mp tables are broken). * * Hanging in the boot is not OK */ muxcnt = 2; nextpin = next_apic_irq(nextpin); while (muxcnt < 5 && nextpin >= 0) { muxcnt++; nextpin = next_apic_irq(nextpin); } if (muxcnt >= 5) { printf("bogus MP table, more than 4 IO APIC pins connected to the same PCI device or ISA/EISA interrupt\n"); return 0; } printf("bogus MP table, %d IO APIC pins connected to the same PCI device or ISA/EISA interrupt\n", muxcnt); nextpin = next_apic_irq(irq); while (nextpin >= 0) { idesc = intr_create(dev_instance, nextpin, handler, arg, maskptr, flags); error = intr_connect(idesc); if (error != 0) return 0; printf("Registered extra interrupt handler for int %d (in addition to int %d)\n", nextpin, irq); nextpin = next_apic_irq(nextpin); }#endif } return (1);}intpci_unmap_int(pcici_t cfg){ return (0); /* not supported, yet, since cfg doesn't know about idesc */}/* ------------------------------------------------------------------------- *//* * Preliminary support for "wired" PCI devices. * This code supports currently only devices on PCI bus 0, since the * mapping from PCI BIOS bus numbers to configuration file bus numbers * is not yet maintained, whenever a PCI to PCI bridge is found. * The "bus" field of "pciwirecfg" correlates an PCI bus with the bridge * it is attached to. The "biosbus" field is to be updated for each bus, * whose bridge is probed. An entry with bus != 0 and biosbus == 0 is * invalid and will be skipped in the search for a wired unit, but not * in the test for a free unit number. */typedef struct { char *name; int unit; u_int8_t bus; u_int8_t slot; u_int8_t func; u_int8_t biosbus;} pciwirecfg;static pciwirecfg pci_wireddevs[] = { /* driver, unit, bus, slot, func, BIOS bus */#ifdef PCI_DEBUG { "ncr", 2, 1, 4, 0, 0 }, { "ed", 2, 1, 5, 0, 0 },#endif /* PCI_DEBUG */ /* do not delete the end marker that follows this comment !!! */ { NULL }};/* return unit number of wired device, or -1 if no match */static intpci_wiredunit(pcicfgregs *cfg, char *name){ pciwirecfg *p; p = pci_wireddevs; while (p->name != NULL) { if (p->bus == cfg->bus && p->slot == cfg->slot && p->func == cfg->func && strcmp(p->name, name) == 0) return (p->unit); p++; } return (-1);}/* return free unit number equal or greater to the one supplied as parameter */static intpci_freeunit(pcicfgregs *cfg, char *name, int unit){ pciwirecfg *p; p = pci_wireddevs; while (p->name != NULL) { if (p->unit == unit && strcmp(p->name, name) == 0) { p = pci_wireddevs; unit++; } else { p++; } } return (unit);}static const char *drvname;static const char*pci_probedrv(pcicfgregs *cfg, struct pci_device *dvp){ if (dvp && dvp->pd_probe) { pcidi_t type = (cfg->device << 16) + cfg->vendor; return (dvp->pd_probe(cfg, type)); } return (NULL);}static struct pci_lkm *pci_lkm_head;static struct pci_device*pci_finddrv(pcicfgregs *cfg){ struct pci_device **dvpp; struct pci_device *dvp = NULL; struct pci_lkm *lkm; drvname = NULL; lkm = pci_lkm_head; while (drvname == NULL && lkm != NULL) { dvp = lkm->dvp; drvname = pci_probedrv(cfg, dvp); lkm = lkm->next; } /* * it wasn't a loaded driver, look in the linked in ones */ dvpp = (struct pci_device **)pcidevice_set.ls_items; while (drvname == NULL && (dvp = *dvpp++) != NULL) drvname = pci_probedrv(cfg, dvp); /* * It wasn't one of the linked in drivers either, so try the defaults. */ if (drvname == NULL) { dvp = &chipset_device; if ((drvname = pci_probedrv(cfg, dvp)) == NULL) dvp = NULL;; } return (dvp);}static voidpci_drvmessage(pcicfgregs *cfg, char *name, int unit){ if (drvname == NULL || *drvname == '\0') return; printf("%s%d: <%s> rev 0x%02x", name, unit, drvname, cfg->revid); if (cfg->intpin != 0) printf(" int %c irq %d", cfg->intpin + 'a' -1, cfg->intline); printf(" on pci%d.%d.%d\n", cfg->bus, cfg->slot, cfg->func);}voidpci_drvattach(struct pci_devinfo *dinfo){ struct pci_device *dvp; pcicfgregs *cfg; cfg = &dinfo->cfg; dvp = pci_finddrv(cfg); if (dvp != NULL) { int unit; unit = pci_wiredunit(cfg, dvp->pd_name); if (unit < 0) { unit = pci_freeunit(cfg, dvp->pd_name, *dvp->pd_count); *dvp->pd_count = unit +1; } pci_drvmessage(cfg, dvp->pd_name, unit); if (dvp->pd_attach) dvp->pd_attach(cfg, unit); dinfo->device = dvp; /* * XXX KDM for some devices, dvp->pd_name winds up NULL. * I haven't investigated enough to figure out why this * would happen. */ if (dvp->pd_name != NULL) strncpy(dinfo->conf.pd_name, dvp->pd_name, sizeof(dinfo->conf.pd_name)); else strncpy(dinfo->conf.pd_name, "????", sizeof(dinfo->conf.pd_name)); dinfo->conf.pd_name[sizeof(dinfo->conf.pd_name) - 1] = 0; dinfo->conf.pd_unit = unit; }}/* ------------------------------------------------------------------------- */static voidpci_rescan(void){ /* XXX do nothing, currently, soon to come ... */}int pci_register_lkm (struct pci_device *dvp, int if_revision){ struct pci_lkm *lkm; if (if_revision != 0) { return (-1); } if (dvp == NULL || dvp->pd_probe == NULL || dvp->pd_attach == NULL) { return (-1); } lkm = malloc (sizeof (*lkm), M_DEVBUF, M_WAITOK); if (lkm == NULL) { return (-1); } lkm->dvp = dvp; lkm->next = pci_lkm_head; pci_lkm_head = lkm; pci_rescan(); return (0);}voidpci_configure(void){ pci_probe(NULL);}/* ------------------------------------------------------------------------- */#endif /* PCI_COMPAT */#endif /* NPCI > 0 */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -