kernel.h
来自「基于组件方式开发操作系统的OSKIT源代码」· C头文件 代码 · 共 307 行
H
307 行
/*- * Copyright (c) 1995 Terrence R. Lambert * All rights reserved. * * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * (c) UNIX System Laboratories, Inc. * All or some portions of this file are derived from material licensed * to the University of California by American Telephone and Telegraph * Co. or Unix System Laboratories, Inc. and are reproduced herein with * the permission of UNIX System Laboratories, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)kernel.h 8.3 (Berkeley) 1/21/94 * $Id: kernel.h,v 1.49 1999/01/14 05:48:46 jdp Exp $ */#ifndef _SYS_KERNEL_H_#define _SYS_KERNEL_H_#include <sys/linker_set.h>#ifdef KERNEL/* Global variables for the kernel. *//* 1.1 */extern long hostid;extern char hostname[MAXHOSTNAMELEN];extern int hostnamelen;extern char domainname[MAXHOSTNAMELEN];extern int domainnamelen;extern char kernelname[MAXPATHLEN];/* 1.2 */extern struct timeval boottime;extern struct timezone tz; /* XXX */extern int tick; /* usec per tick (1000000 / hz) */extern int tickadj; /* "standard" clock skew, us./tick */extern int hz; /* system clock's frequency */extern int psratio; /* ratio: prof / stat */extern int stathz; /* statistics clock's frequency */extern int profhz; /* profiling clock's frequency */extern int ticks;extern int lbolt; /* once a second sleep address */extern int tickdelta;extern long timedelta;#endif /* KERNEL *//* * Enumerated types for known system startup interfaces. * * Startup occurs in ascending numeric order; the list entries are * sorted prior to attempting startup to guarantee order. Items * of the same level are arbitrated for order based on the 'order' * element. * * These numbers are arbitrary and are chosen ONLY for ordering; the * enumeration values are explicit rather than implicit to provide * for binary compatibility with inserted elements. * * The SI_SUB_RUN_SCHEDULER value must have the highest lexical value. * * The SI_SUB_CONSOLE and SI_SUB_SWAP values represent values used by * the BSD 4.4Lite but not by FreeBSD; they are maintained in dependent * order to support porting. * * The SI_SUB_PROTO_BEGIN and SI_SUB_PROTO_END bracket a range of * initializations to take place at splimp(). This is a historical * wart that should be removed -- probably running everything at * splimp() until the first init that doesn't want it is the correct * fix. They are currently present to ensure historical behavior. */enum sysinit_sub_id { SI_SUB_DUMMY = 0x0000000, /* not executed; for linker*/ SI_SUB_DONE = 0x0000001, /* processed*/ SI_SUB_CONSOLE = 0x0800000, /* console*/ SI_SUB_COPYRIGHT = 0x0800001, /* first use of console*/ SI_SUB_VM = 0x1000000, /* virtual memory system init*/ SI_SUB_KMEM = 0x1800000, /* kernel memory*/ SI_SUB_CPU = 0x2000000, /* CPU resource(s)*/ SI_SUB_KLD = 0x2100000, /* KLD and module setup */ SI_SUB_DEVFS = 0x2200000, /* get DEVFS ready */ SI_SUB_DRIVERS = 0x2300000, /* Let Drivers initialize */ SI_SUB_CONFIGURE = 0x2400000, /* Configure devices */ SI_SUB_INTRINSIC = 0x2800000, /* proc 0*/ SI_SUB_RUN_QUEUE = 0x3000000, /* the run queue*/ SI_SUB_VM_CONF = 0x3800000, /* config VM, set limits*/ SI_SUB_VFS = 0x4000000, /* virtual file system*/ SI_SUB_CLOCKS = 0x4800000, /* real time and stat clocks*/ SI_SUB_MBUF = 0x5000000, /* mbufs*/ SI_SUB_CLIST = 0x5800000, /* clists*/ SI_SUB_SYSV_SHM = 0x6400000, /* System V shared memory*/ SI_SUB_SYSV_SEM = 0x6800000, /* System V semaphores*/ SI_SUB_SYSV_MSG = 0x6C00000, /* System V message queues*/ SI_SUB_P1003_1B = 0x6E00000, /* P1003.1B realtime */ SI_SUB_PSEUDO = 0x7000000, /* pseudo devices*/ SI_SUB_EXEC = 0x7400000, /* execve() handlers */ SI_SUB_PROTO_BEGIN = 0x8000000, /* XXX: set splimp (kludge)*/ SI_SUB_PROTO_IF = 0x8400000, /* interfaces*/ SI_SUB_PROTO_DOMAIN = 0x8800000, /* domains (address families?)*/ SI_SUB_PROTO_END = 0x8ffffff, /* XXX: set splx (kludge)*/ SI_SUB_KPROF = 0x9000000, /* kernel profiling*/ SI_SUB_KICK_SCHEDULER = 0xa000000, /* start the timeout events*/ SI_SUB_INT_CONFIG_HOOKS = 0xa800000, /* Interrupts enabled config */ SI_SUB_ROOT_CONF = 0xb000000, /* Find root devices */ SI_SUB_DUMP_CONF = 0xb200000, /* Find dump devices */ SI_SUB_MOUNT_ROOT = 0xb400000, /* root mount*/ SI_SUB_ROOT_FDTAB = 0xb800000, /* root vnode in fd table...*/ SI_SUB_SWAP = 0xc000000, /* swap*/ SI_SUB_INTRINSIC_POST = 0xd000000, /* proc 0 cleanup*/ SI_SUB_KTHREAD_INIT = 0xe000000, /* init process*/ SI_SUB_KTHREAD_PAGE = 0xe400000, /* pageout daemon*/ SI_SUB_KTHREAD_VM = 0xe800000, /* vm daemon*/ SI_SUB_KTHREAD_UPDATE = 0xec00000, /* update daemon*/ SI_SUB_KTHREAD_IDLE = 0xee00000, /* idle procs*/ SI_SUB_SMP = 0xf000000, /* idle procs*/ SI_SUB_RUN_SCHEDULER = 0xfffffff /* scheduler: no return*/};/* * Some enumerated orders; "ANY" sorts last. */enum sysinit_elem_order { SI_ORDER_FIRST = 0x0000000, /* first*/ SI_ORDER_SECOND = 0x0000001, /* second*/ SI_ORDER_THIRD = 0x0000002, /* third*/ SI_ORDER_MIDDLE = 0x1000000, /* somewhere in the middle */ SI_ORDER_ANY = 0xfffffff /* last*/};/* * System initialization call types; currently two are supported... one * to do a simple function call and one to cause a process to be started * by the kernel on the callers behalf. */typedef enum sysinit_elem_type { SI_TYPE_DEFAULT = 0x00000000, /* No special processing*/ SI_TYPE_KTHREAD = 0x00000001, /* start kernel thread*/ SI_TYPE_KPROCESS = 0x00000002 /* start kernel process*/} si_elem_t;/* * A system initialization call instance * * The subsystem */struct sysinit { unsigned int subsystem; /* subsystem identifier*/ unsigned int order; /* init order within subsystem*/ void (*func) __P((void *)); /* init function*/ void *udata; /* multiplexer/argument */ si_elem_t type; /* sysinit_elem_type*/};/* * Default: no special processing */#define SYSINIT(uniquifier, subsystem, order, func, ident) \ static struct sysinit uniquifier ## _sys_init = { \ subsystem, \ order, \ func, \ ident, \ SI_TYPE_DEFAULT \ }; \ DATA_SET(sysinit_set,uniquifier ## _sys_init);/* * Called on module unload: no special processing */#define SYSUNINIT(uniquifier, subsystem, order, func, ident) \ static struct sysinit uniquifier ## _sys_uninit = { \ subsystem, \ order, \ func, \ ident, \ SI_TYPE_DEFAULT \ }; \ DATA_SET(sysuninit_set,uniquifier ## _sys_uninit)/* * Call 'fork()' before calling '(*func)(ident)'; * for making a kernel 'thread' (or builtin process.) */#define SYSINIT_KT(uniquifier, subsystem, order, func, ident) \ static struct sysinit uniquifier ## _sys_init = { \ subsystem, \ order, \ func, \ ident, \ SI_TYPE_KTHREAD \ }; \ DATA_SET(sysinit_set,uniquifier ## _sys_init);#define SYSINIT_KP(uniquifier, subsystem, order, func, ident) \ static struct sysinit uniquifier ## _sys_init = { \ subsystem, \ order, \ func, \ ident, \ SI_TYPE_KPROCESS \ }; \ DATA_SET(sysinit_set,uniquifier ## _sys_init);/* * A kernel process descriptor; used to start "internal" daemons * * Note: global_procpp may be NULL for no global save area */struct kproc_desc { char *arg0; /* arg 0 (for 'ps' listing)*/ void (*func) __P((void)); /* "main" for kernel process*/ struct proc **global_procpp; /* ptr to proc ptr save area*/};void kproc_start __P((void *udata));void sysinit_add __P((struct sysinit **set));#ifdef PSEUDO_LKM#include <sys/conf.h>#include <sys/exec.h>#include <sys/sysent.h>#include <sys/lkm.h>#define PSEUDO_SET(init, name) \ extern struct linker_set MODVNOPS; \ MOD_MISC(name); \ static int \ name ## _load(struct lkm_table *lkmtp, int cmd) \ { init((void *)NULL /* XXX unused (?) */); return 0; } \ static int \ name ## _unload(struct lkm_table *lkmtp, int cmd) \ { return EINVAL; } \ int \ name ## _mod(struct lkm_table *lkmtp, int cmd, int ver) { \ MOD_DISPATCH(name, lkmtp, cmd, ver, name ## _load, name ## _unload, \ lkm_nullcmd); } \ struct __hack#else /* PSEUDO_LKM *//* * Compatibility. To be deprecated after LKM is updated. */#include <sys/module.h>#define PSEUDO_SET(sym, name) \ static int name ## _modevent(module_t mod, int type, void *data) \ { \ void (*initfunc)(void *) = (void (*)(void *))data; \ switch (type) { \ case MOD_LOAD: \ /* printf(#name " module load\n"); */ \ initfunc(NULL); \ break; \ case MOD_UNLOAD: \ printf(#name " module unload - not possible for this module type\n"); \ return EINVAL; \ } \ return 0; \ } \ static moduledata_t name ## _mod = { \ #name, \ name ## _modevent, \ (void *)sym \ }; \ DECLARE_MODULE(name, name ## _mod, SI_SUB_PSEUDO, SI_ORDER_ANY)#endif /* PSEUDO_LKM */extern struct linker_set execsw_set;#endif /* !_SYS_KERNEL_H_*/
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?