systm.h
来自「基于组件方式开发操作系统的OSKIT源代码」· C头文件 代码 · 共 226 行
H
226 行
/* $NetBSD: systm.h,v 1.49.4.1 1996/06/11 13:18:43 briggs Exp $ *//*- * Copyright (c) 1982, 1988, 1991, 1993 * The Regents of the University of California. All rights reserved. * (c) UNIX System Laboratories, Inc. * All or some portions of this file are derived from material licensed * to the University of California by American Telephone and Telegraph * Co. or Unix System Laboratories, Inc. and are reproduced herein with * the permission of UNIX System Laboratories, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)systm.h 8.4 (Berkeley) 2/23/94 *//* * The `securelevel' variable controls the security level of the system. * It can only be decreased by process 1 (/sbin/init). * * Security levels are as follows: * -1 permannently insecure mode - always run system in level 0 mode. * 0 insecure mode - immutable and append-only flags make be turned off. * All devices may be read or written subject to permission modes. * 1 secure mode - immutable and append-only flags may not be changed; * raw disks of mounted filesystems, /dev/mem, and /dev/kmem are * read-only. * 2 highly secure mode - same as (1) plus raw disks are always * read-only whether mounted or not. This level precludes tampering * with filesystems by unmounting them, but also inhibits running * newfs while the system is secured. * * In normal operation, the system runs in level 0 mode while single user * and in level 1 mode while multiuser. If level 2 mode is desired while * running multiuser, it can be set in the multiuser startup script * (/etc/rc.local) using sysctl(1). If it is desired to run the system * in level 0 mode while multiuser, initialize the variable securelevel * in /sys/kern/kern_sysctl.c to -1. Note that it is NOT initialized to * zero as that would allow the vmunix binary to be patched to -1. * Without initialization, securelevel loads in the BSS area which only * comes into existence when the kernel is loaded and hence cannot be * patched by a stalking hacker. */extern int securelevel; /* system security level */extern const char *panicstr; /* panic message */extern char version[]; /* system version */extern char copyright[]; /* system copyright */extern int nblkdev; /* number of entries in bdevsw */extern int nchrdev; /* number of entries in cdevsw */extern int nswdev; /* number of swap devices */extern int nswap; /* size of swap space */extern int selwait; /* select timeout address */extern u_char curpriority; /* priority of current process */extern int maxmem; /* max memory per process */extern int physmem; /* physical memory */extern dev_t dumpdev; /* dump device */extern long dumplo; /* offset into dumpdev */extern dev_t rootdev; /* root device */extern struct vnode *rootvp; /* vnode equivalent to above */extern dev_t swapdev; /* swapping device */extern struct vnode *swapdev_vp;/* vnode equivalent to above */extern struct sysent { /* system call table */ short sy_narg; /* number of args */ short sy_argsize; /* total size of arguments */ /* implementing function */ int (*sy_call) __P((struct proc *, void *, register_t *));} sysent[];extern int nsysent;#define SCARG(p,k) ((p)->k.datum) /* get arg from args pointer */extern int boothowto; /* reboot flags, from console subsystem */extern void (*v_putc) __P((int)); /* Virtual console putc routine */extern void _insque __P((void *, void *));extern void _remque __P((void *));/* casts to keep lint happy, but it should be happy with void * */#define insque(q,p) _insque(q, p)#define remque(q) _remque(q)/* * General function declarations. */int nullop __P((void *));int enodev __P((void));int enosys __P((void));int enoioctl __P((void));int enxio __P((void));int eopnotsupp __P((void));int lkmenodev __P((void));int seltrue __P((dev_t dev, int which, struct proc *p));void *hashinit __P((int count, int type, u_long *hashmask));int sys_nosys __P((struct proc *, void *, register_t *));void panic __P((const char *, ...))#ifdef __KPRINTF_ATTRIBUTE__ __kprintf_attribute__((__noreturn__,__format__(__kprintf__,1,2)));#else __attribute__((__noreturn__));#endifvoid printf __P((const char *, ...)) __kprintf_attribute__((__format__(__kprintf__,1,2)));void uprintf __P((const char *, ...)) __kprintf_attribute__((__format__(__kprintf__,1,2)));int sprintf __P((char *buf, const char *, ...)) __kprintf_attribute__((__format__(__kprintf__,2,3)));void ttyprintf __P((struct tty *, const char *, ...)) __kprintf_attribute__((__format__(__kprintf__,2,3)));void tablefull __P((const char *));void bcopy __P((const void *from, void *to, size_t len));void ovbcopy __P((const void *from, void *to, size_t len));void bzero __P((void *buf, size_t len));int bcmp __P((const void *b1, const void *b2, size_t len));int copystr __P((void *kfaddr, void *kdaddr, size_t len, size_t *done));int copyinstr __P((void *udaddr, void *kaddr, size_t len, size_t *done));int copyoutstr __P((void *kaddr, void *udaddr, size_t len, size_t *done));int copyin __P((void *udaddr, void *kaddr, size_t len));int copyout __P((void *kaddr, void *udaddr, size_t len));int fubyte __P((void *base));#ifdef notdefint fuibyte __P((void *base));#endifint subyte __P((void *base, int byte));int suibyte __P((void *base, int byte));long fuword __P((void *base));long fuiword __P((void *base));int suword __P((void *base, long word));int suiword __P((void *base, long word));int fuswintr __P((caddr_t));int suswintr __P((caddr_t, u_int));struct timeval;int hzto __P((struct timeval *tv));void timeout __P((void (*func)(void *), void *arg, int ticks));void untimeout __P((void (*func)(void *), void *arg));void realitexpire __P((void *));struct clockframe;void hardclock __P((struct clockframe *frame));void softclock __P((void));void statclock __P((struct clockframe *frame));#ifdef NTPvoid hardupdate __P((long offset));#endifvoid initclocks __P((void));void inittodr __P((time_t));void resettodr __P((void));void cpu_initclocks __P((void));void startprofclock __P((struct proc *));void stopprofclock __P((struct proc *));void setstatclockrate __P((int hzrate));/* * Shutdown hooks. Functions to be run with all interrupts disabled * immediately before the system is halted or rebooted. */void *shutdownhook_establish __P((void (*)(void *), void *));void shutdownhook_disestablish __P((void *));void doshutdownhooks __P((void));int uiomove __P((caddr_t, int, struct uio *));int setjmp __P((label_t *));void longjmp __P((label_t *));void consinit __P((void));void cpu_startup __P((void));void cpu_set_kpc __P((struct proc *, void (*)(struct proc *)));#ifdef GPROFvoid kmstartup __P((void));#endif#include <lib/libkern/libkern.h>#ifdef DDB/* debugger entry points */void Debugger __P((void)); /* in DDB only */int read_symtab_from_file __P((struct proc *,struct vnode *,const char *));#endif
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?