skgedrv.h

uboot是一款优秀的嵌入式系统的bootloader程序。本软件包是uboot在ADI公司的blackfin533处理器上的移植。

/******************************************************************************
 *
 * Name:	skgedrv.h
 * Project:	GEnesis, PCI Gigabit Ethernet Adapter
 * Version:	$Revision: 1.1.1.1 $
 * Date:	$Date: 2004/07/02 11:44:55 $
 * Purpose:	Interface with the driver
 *
 ******************************************************************************/

/******************************************************************************
 *
 *	(C)Copyright 1998-2002 SysKonnect GmbH.
 *
 *	This program is free software; you can redistribute it and/or modify
 *	it under the terms of the GNU General Public License as published by
 *	the Free Software Foundation; either version 2 of the License, or
 *	(at your option) any later version.
 *
 *	The information in this file is provided "AS IS" without warranty.
 *
 ******************************************************************************/

/******************************************************************************
 *
 * History:
 *
 *	$Log: skgedrv.h,v $
 *	Revision 1.1.1.1  2004/07/02 11:44:55  lgsoft
 *	Import of uboot
 *	
 *	Revision 1.6  2002/07/15 15:38:01  rschmidt
 *	Power Management support
 *	Editorial changes
 *
 *	Revision 1.5  2002/04/25 11:05:47  rschmidt
 *	Editorial changes
 *
 *	Revision 1.4  1999/11/22 13:52:46  cgoos
 *	Changed license header to GPL.
 *
 *	Revision 1.3  1998/12/01 13:31:39  cgoos
 *	SWITCH INTERN Event added.
 *
 *	Revision 1.2  1998/11/25 08:28:38  gklug
 *	rmv: PORT SWITCH Event
 *
 *	Revision 1.1  1998/09/29 06:14:07  gklug
 *	add: driver events (initial version)
 *
 *
 ******************************************************************************/

#ifndef __INC_SKGEDRV_H_
#define __INC_SKGEDRV_H_

/* defines ********************************************************************/

/*
 * Define the driver events.
 * Usually the events are defined by the destination module.
 * In case of the driver we put the definition of the events here.
 */
#define SK_DRV_PORT_RESET		 1	/* The port needs to be reset */
#define SK_DRV_NET_UP   		 2	/* The net is operational */
#define SK_DRV_NET_DOWN			 3	/* The net is down */
#define SK_DRV_SWITCH_SOFT		 4	/* Ports switch with both links connected */
#define SK_DRV_SWITCH_HARD		 5	/* Port switch due to link failure */
#define SK_DRV_RLMT_SEND		 6	/* Send a RLMT packet */
#define SK_DRV_ADAP_FAIL		 7	/* The whole adapter fails */
#define SK_DRV_PORT_FAIL		 8	/* One port fails */
#define SK_DRV_SWITCH_INTERN	 9	/* Port switch by the driver itself */
#define SK_DRV_POWER_DOWN		10	/* Power down mode */

#endif	/* __INC_SKGEDRV_H_ */