⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 isapnp.h

📁 linux下从网卡远程启动
💻 H
字号:
/****************************************************************************    isapnp.h -- Etherboot isapnp support for the 3Com 3c515*    Written 2002-2003 by Timothy Legge <tlegge@rogers.com>**    This program is free software; you can redistribute it and/or modify*    it under the terms of the GNU General Public License as published by*    the Free Software Foundation; either version 2 of the License, or*    (at your option) any later version.**    This program is distributed in the hope that it will be useful,*    but WITHOUT ANY WARRANTY; without even the implied warranty of*    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the*    GNU General Public License for more details.**    You should have received a copy of the GNU General Public License*    along with this program; if not, write to the Free Software*    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.**    Portions of this code:*				Copyright (C) 2001  P.J.H.Fox (fox@roestock.demon.co.uk)****    REVISION HISTORY:*    ================*        Version 0.1 April 26, 2002 	TJL*		 Version 0.2 01/08/2003			TJL Renamed from 3c515_isapnp.h****************************************************************************//*extern int read_port;*//*#define DEBUG*/#define ADDRESS_ADDR 0x0279#define WRITEDATA_ADDR 0x0a79/* MIN and MAX READ_ADDR must have the bottom two bits set */#define MIN_READ_ADDR 0x0203#define START_READ_ADDR 0x203#define MAX_READ_ADDR 0x03ff/* READ_ADDR_STEP must be a multiple of 4 */#ifndef READ_ADDR_STEP#define READ_ADDR_STEP 8#endif#ifdef EDEBUGstatic int x;#define ADDRESS(x) (outb(x, ADDRESS_ADDR), printf("\nAddress: %hX", x))#define WRITE_DATA(x) (outb(x, WRITEDATA_ADDR), printf(" WR(%hX)", x & 0xff))#define READ_DATA (x = inb(read_port), printf(" RD(%hX)", x & 0xff), x)#define READ_IOPORT(p) (x = inb(p), printf(" [%hX](%hX)", p, x & 0xff), x)#else				/* !DEBUG */#define ADDRESS(x) outb(x, ADDRESS_ADDR)#define WRITE_DATA(x) outb(x, WRITEDATA_ADDR)#define READ_DATA inb(read_port)#define READ_IOPORT(p) inb(p)#endif				/* !DEBUG */#define INIT_LENGTH 32#define INITDATA { 0x6a, 0xb5, 0xda, 0xed, 0xf6, 0xfb, 0x7d, 0xbe,\                   0xdf, 0x6f, 0x37, 0x1b, 0x0d, 0x86, 0xc3, 0x61,\                   0xb0, 0x58, 0x2c, 0x16, 0x8b, 0x45, 0xa2, 0xd1,\                   0xe8, 0x74, 0x3a, 0x9d, 0xce, 0xe7, 0x73, 0x39 }/* Registers */#define SetRdPort(x)		(ADDRESS(0x00),WRITE_DATA((x)>>2),read_port=((x)|3))#define SERIALISOLATION 	ADDRESS(0x01)#define CONFIGCONTROL		ADDRESS(0x02)#define Wake(x)				(ADDRESS(0x03),WRITE_DATA(x))#define RESOURCEDATA		(ADDRESS(0x04),READ_DATA)#define STATUS          	(ADDRESS(0x05),READ_DATA)#define CARDSELECTNUMBER	ADDRESS(0x06)#define LOGICALDEVICENUMBER	ADDRESS(0x07)#define ACTIVATE			ADDRESS(0x30)#define IORANGECHECK		ADDRESS(0x31)/* Bits */#define CONFIG_RESET		0x01#define CONFIG_WAIT_FOR_KEY 0x02#define CONFIG_RESET_CSN	0x04#define CONFIG_RESET_DRV	0x07/* Short  Tags */#define PnPVerNo_TAG		0x01#define LogDevId_TAG		0x02#define CompatDevId_TAG		0x03#define IRQ_TAG			0x04#define DMA_TAG			0x05#define StartDep_TAG		0x06#define EndDep_TAG		0x07#define IOport_TAG		0x08#define FixedIO_TAG		0x09#define RsvdShortA_TAG		0x0A#define RsvdShortB_TAG		0x0B#define RsvdShortC_TAG		0x0C#define RsvdShortD_TAG		0x0D#define VendorShort_TAG		0x0E#define End_TAG			0x0F/* Long  Tags */#define MemRange_TAG		0x81#define ANSIstr_TAG		0x82#define UNICODEstr_TAG		0x83#define VendorLong_TAG		0x84#define Mem32Range_TAG		0x85#define FixedMem32Range_TAG	0x86#define RsvdLong0_TAG		0xF0#define RsvdLong1_TAG		0xF1#define RsvdLong2_TAG		0xF2#define RsvdLong3_TAG		0xF3#define RsvdLong4_TAG		0xF4#define RsvdLong5_TAG		0xF5#define RsvdLong6_TAG		0xF6#define RsvdLong7_TAG		0xF7#define RsvdLong8_TAG		0xF8#define RsvdLong9_TAG		0xF9#define RsvdLongA_TAG		0xFA#define RsvdLongB_TAG		0xFB#define RsvdLongC_TAG		0xFC#define RsvdLongD_TAG		0xFD#define RsvdLongE_TAG		0xFE#define RsvdLongF_TAG		0xFF#define NewBoard_PSEUDOTAG	0x100

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -