⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 s_rintf.s

📁 Glibc 2.3.2源代码(解压后有100多M)
💻 S
字号:
.file "rintf.s"// Copyright (C) 2000, 2001, Intel Corporation// All rights reserved.// // Contributed 2/2/2000 by John Harrison, Ted Kubaska, Bob Norin, Shane Story,// and Ping Tak Peter Tang of the Computational Software Lab, Intel Corporation.//// Redistribution and use in source and binary forms, with or without// modification, are permitted provided that the following conditions are// met://// * Redistributions of source code must retain the above copyright// notice, this list of conditions and the following disclaimer.//// * Redistributions in binary form must reproduce the above copyright// notice, this list of conditions and the following disclaimer in the// documentation and/or other materials provided with the distribution.//// * The name of Intel Corporation may not be used to endorse or promote// products derived from this software without specific prior written// permission.//// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR ITS // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, // PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR // PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY // OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT (INCLUDING// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS // SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // // Intel Corporation is the author of this code, and requests that all// problem reports or change requests be submitted to it directly at // http://developer.intel.com/opensource.//// History//==============================================================// 2/02/00: Initial version// 2/08/01  Corrected behavior for all rounding modes.//// API//==============================================================// float rintf(float x)#include "libm_support.h"//// general registers used:  //rint_GR_FFFF      = r14rint_GR_signexp   = r15rint_GR_exponent  = r16rint_GR_17ones    = r17rint_GR_10033     = r18rint_GR_fpsr      = r19rint_GR_rcs0      = r20rint_GR_rcs0_mask = r21// predicate registers used: // p6-11// floating-point registers used: RINT_NORM_f8      = f9                        RINT_FFFF         = f10 RINT_INEXACT      = f11 RINT_FLOAT_INT_f8 = f12RINT_INT_f8       = f13// Overview of operation//==============================================================// float rintf(float x)// Return an integer value (represented as a float) that is x rounded to integer in current// rounding mode // Inexact is set if x != rintf(x)// *******************************************************************************// Set denormal flag for denormal input and// and take denormal fault if necessary.// Is the input an integer value already?// double_extended// if the exponent is >= 1003e => 3F(true) = 63(decimal)// we have a significand of 64 bits 1.63-bits.// If we multiply by 2^63, we no longer have a fractional part// So input is an integer value already.// double// if the exponent is >= 10033 => 34(true) = 52(decimal)// 34 + 3ff = 433// we have a significand of 53 bits 1.52-bits. (implicit 1)// If we multiply by 2^52, we no longer have a fractional part// So input is an integer value already.// single// if the exponent is >= 10016 => 17(true) = 23(decimal)// we have a significand of 53 bits 1.52-bits. (implicit 1)// If we multiply by 2^52, we no longer have a fractional part// So input is an integer value already.// If x is NAN, ZERO, or INFINITY, then  return// qnan snan inf norm     unorm 0 -+// 1    1    1   0        0     1 11     0xe7.align 32.global rintf#.section .text.proc  rintf#.align 32rintf:#ifdef _LIBC.global __rintf.type __rintf,@function__rintf:#endif{ .mfi      mov rint_GR_fpsr = ar40           // Read the fpsr--need to check rc.s0      fcvt.fx.s1     RINT_INT_f8  = f8      addl            rint_GR_10033 = 0x10016, r0}{ .mfi      mov        rint_GR_FFFF      = -1      fnorm.s1        RINT_NORM_f8  = f8      mov         rint_GR_17ones    = 0x1FFFF;;}{ .mfi      setf.sig    RINT_FFFF  = rint_GR_FFFF      fclass.m.unc  p6,p0 = f8, 0xe7      mov         rint_GR_rcs0_mask  = 0x0c00;;}{ .mfb	nop.m 999(p6)  fnorm.s f8 = f8(p6)  br.ret.spnt   b0    // Exit if x nan, inf, zero;;}{ .mfi	nop.m 999      fcvt.xf         RINT_FLOAT_INT_f8   = RINT_INT_f8	nop.i 999;;}{ .mfi      getf.exp rint_GR_signexp  = RINT_NORM_f8      fcmp.eq.s0  p8,p0 = f8,f0      // Dummy op to set denormal        nop.i 999;;}{ .mii	nop.m 999	nop.i 999       and      rint_GR_exponent = rint_GR_signexp, rint_GR_17ones;;}{ .mmi      cmp.ge.unc      p7,p6 = rint_GR_exponent, rint_GR_10033      and rint_GR_rcs0 = rint_GR_rcs0_mask, rint_GR_fpsr	nop.i 999;;}// Check to see if s0 rounding mode is round to nearest.  If not then set s2// rounding mode to that of s0 and repeat conversions.L(RINT_COMMON):{ .mfb      cmp.ne   p11,p0 = rint_GR_rcs0, r0(p6) fclass.m.unc   p9,p10  = RINT_FLOAT_INT_f8, 0x07  // Test for result=0(p11) br.cond.spnt L(RINT_NOT_ROUND_NEAREST)  // Branch if not round to nearest;;}{ .mfi	nop.m 999(p6) fcmp.eq.unc.s1  p0,p8  = RINT_FLOAT_INT_f8, RINT_NORM_f8	nop.i 999}{ .mfi	nop.m 999(p7) fnorm.s.s0   f8 = f8	nop.i 999;;}// If result is zero, merge sign of input{ .mfi     nop.m 999(p9) fmerge.s f8 = f8, RINT_FLOAT_INT_f8     nop.i 999}{ .mfi      nop.m 999(p10) fnorm.s f8 = RINT_FLOAT_INT_f8     nop.i 999;;}{ .mfb     nop.m 999(p8) fmpy.s0     RINT_INEXACT = RINT_FFFF,RINT_FFFF  // Dummy to set inexact     br.ret.sptk    b0;;}L(RINT_NOT_ROUND_NEAREST):// Set rounding mode of s2 to that of s0{ .mfi      mov rint_GR_rcs0 = r0       // Clear so we don't come back here      fsetc.s2     0x7f, 0x40	nop.i 999;;}{ .mfi	nop.m 999      fcvt.fx.s2     RINT_INT_f8  = f8	nop.i 999;;}{ .mfb	nop.m 999      fcvt.xf         RINT_FLOAT_INT_f8   = RINT_INT_f8      br.cond.sptk  L(RINT_COMMON);;}.endp rintfASM_SIZE_DIRECTIVE(rintf)#ifdef _LIBCASM_SIZE_DIRECTIVE(__rintf)#endif

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -