📄 s_roundf.s
字号:
.file "roundf.s"// Copyright (C) 2000, 2001, Intel Corporation// All rights reserved.// // Contributed 10/25/2000 by John Harrison, Cristina Iordache, Ted Kubaska,// Bob Norin, Tom Rowan, Shane Story, and Ping Tak Peter Tang of the// Computational Software Lab, Intel Corporation.//// Redistribution and use in source and binary forms, with or without// modification, are permitted provided that the following conditions are// met://// * Redistributions of source code must retain the above copyright// notice, this list of conditions and the following disclaimer.//// * Redistributions in binary form must reproduce the above copyright// notice, this list of conditions and the following disclaimer in the// documentation and/or other materials provided with the distribution.//// * The name of Intel Corporation may not be used to endorse or promote// products derived from this software without specific prior written// permission.//// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR ITS // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, // PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR // PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY // OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT (INCLUDING// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS // SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // // Intel Corporation is the author of this code, and requests that all// problem reports or change requests be submitted to it directly at // http://developer.intel.com/opensource.//// History//==============================================================// 10/25/2000: Created//==============================================================//// API//==============================================================// float roundf(float x)//#include "libm_support.h"// general input registers: //roundf_GR_half = r14roundf_GR_big = r15roundf_GR_expmask = r16roundf_GR_signexp = r17roundf_GR_exp = r18roundf_GR_expdiff = r19// predicate registers used: // p6 - p10// floating-point registers used: ROUNDF_NORM_f8 = f9 ROUNDF_TRUNC_f8 = f10ROUNDF_RINT_f8 = f11ROUNDF_FLOAT_TRUNC_f8 = f12ROUNDF_FLOAT_RINT_f8 = f13ROUNDF_REMAINDER = f14ROUNDF_HALF = f15// Overview of operation//==============================================================// float roundf(float x)// Return an integer value (represented as a float) that is x // rounded to nearest integer, halfway cases rounded away from // zero. // if x>0 result = trunc(x+0.5)// if x<0 result = trunc(x-0.5)// *******************************************************************************// Set denormal flag for denormal input and// and take denormal fault if necessary.// If x is NAN, ZERO, INFINITY, or >= 2^23 then return// qnan snan inf norm unorm 0 -+// 1 1 1 0 0 1 11 0xe7.align 32.global roundf#.section .text.proc roundf#.align 32roundf: // Get exponent for +0.5// Truncate x to integer{ .mfi addl roundf_GR_half = 0x0fffe, r0 fcvt.fx.trunc.s1 ROUNDF_TRUNC_f8 = f8 nop.i 999} // Get signexp of x// Normalize input// Form exponent mask{ .mfi getf.exp roundf_GR_signexp = f8 fnorm ROUNDF_NORM_f8 = f8 addl roundf_GR_expmask = 0x1ffff, r0 ;;}// Form +0.5// Round x to integer{ .mfi setf.exp ROUNDF_HALF = roundf_GR_half fcvt.fx.s1 ROUNDF_RINT_f8 = f8 nop.i 999 ;;}// Get exp of x// Test for NAN, INF, ZERO// Get exponent at which input has no fractional part{ .mfi and roundf_GR_exp = roundf_GR_expmask, roundf_GR_signexp fclass.m p8,p9 = f8,0xe7 addl roundf_GR_big = 0x10016, r0 ;;}// Get exp-bigexp// If exp is so big there is no fractional part, then turn on p8, off p9{ .mmi sub roundf_GR_expdiff = roundf_GR_exp, roundf_GR_big ;;#ifdef _LIBC(p9) cmp.lt.or.andcm p8,p9 = r0, roundf_GR_expdiff#else(p9) cmp.ge.or.andcm p8,p9 = roundf_GR_expdiff, r0#endif nop.i 999 ;;} // Set p6 if x<0, else set p7{ .mfi nop.m 999(p9) fcmp.lt.unc p6,p7 = f8,f0 nop.i 999} // If NAN, INF, ZERO, or no fractional part, result is just normalized input{ .mfi nop.m 999(p8) fnorm.s.s0 f8 = f8 nop.i 999 ;;}// Float the truncated integer{ .mfi nop.m 999(p9) fcvt.xf ROUNDF_FLOAT_TRUNC_f8 = ROUNDF_TRUNC_f8 nop.i 999 ;;}// Float the rounded integer to get preliminary result{ .mfi nop.m 999(p9) fcvt.xf ROUNDF_FLOAT_RINT_f8 = ROUNDF_RINT_f8 nop.i 999 ;;}// If x<0 and the difference of the truncated input minus the input is 0.5// then result = truncated input - 1.0// Else if x>0 and the difference of the input minus truncated input is 0.5// then result = truncated input + 1.0// Else // result = rounded input// Endif{ .mfi nop.m 999(p6) fsub.s1 ROUNDF_REMAINDER = ROUNDF_FLOAT_TRUNC_f8, ROUNDF_NORM_f8 nop.i 999} { .mfi nop.m 999(p7) fsub.s1 ROUNDF_REMAINDER = ROUNDF_NORM_f8, ROUNDF_FLOAT_TRUNC_f8 nop.i 999 ;;}// Assume preliminary result is rounded integer{ .mfi nop.m 999(p9) fnorm.s.s0 f8 = ROUNDF_FLOAT_RINT_f8 nop.i 999}// If x<0, test if result=0{ .mfi nop.m 999(p6) fcmp.eq.unc p10,p0 = ROUNDF_FLOAT_RINT_f8,f0 nop.i 999 ;;}// If x<0 and result=0, set result=-0{ .mfi nop.m 999(p10) fmerge.ns f8 = f1,f8 nop.i 999} // If x<0, test if remainder=0.5{ .mfi nop.m 999(p6) fcmp.eq.unc p6,p0 = ROUNDF_REMAINDER, ROUNDF_HALF nop.i 999 ;;} // If x>0, test if remainder=0.5{ .mfi nop.m 999(p7) fcmp.eq.unc p7,p0 = ROUNDF_REMAINDER, ROUNDF_HALF nop.i 999 ;;}// If x<0 and remainder=0.5, result=truncated-1.0// If x>0 and remainder=0.5, result=truncated+1.0// Exit.pred.rel "mutex",p6,p7{ .mfi nop.m 999(p6) fsub.s.s0 f8 = ROUNDF_FLOAT_TRUNC_f8,f1 nop.i 999 } { .mfb nop.m 999(p7) fadd.s.s0 f8 = ROUNDF_FLOAT_TRUNC_f8,f1 br.ret.sptk b0 ;;}.endp roundfASM_SIZE_DIRECTIVE(roundf)
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -