mr24_vhz_test.prm

3 phase motor driver source code with freescale MCU

    
LINK mr24_VHz_test.abs
 
NAMES main.o fault.o pwmcalc.o ramp.o speed.o code_isr.o pi.o tacho.o start08.o ansi.lib END
															   
SECTIONS
    Z_RAM  = READ_WRITE  0x0060 TO 0x00FF; 
    MY_RAM = READ_WRITE  0x0100 TO 0x024F;
    MY_ROM = READ_ONLY   0xBE00 TO 0xFDFF;


PLACEMENT
    DEFAULT_ROM  INTO  MY_ROM;
    DEFAULT_RAM  INTO  MY_RAM;
    MY_ZEROPAGE  INTO  Z_RAM;
END

STACKSIZE 0x60

/* set reset vector on _Startup */
VECTOR ADDRESS 0xFFFE _Startup
VECTOR ADDRESS 0xFFFC SWI_Int
VECTOR ADDRESS 0xFFFA IRQ1_Int
VECTOR ADDRESS 0xFFF8 PLL_Int
VECTOR ADDRESS 0xFFF6 FAULT1_Int
VECTOR ADDRESS 0xFFF4 FAULT2_Int
VECTOR ADDRESS 0xFFF2 FAULT3_Int
VECTOR ADDRESS 0xFFF0 FAULT4_Int
VECTOR ADDRESS 0xFFEE PWMMC_Int
VECTOR ADDRESS 0xFFEC TIMACh0_Int
VECTOR ADDRESS 0xFFEA TIMACh1_Int
VECTOR ADDRESS 0xFFE8 TIMACh2_Int
VECTOR ADDRESS 0xFFE6 TIMACh3_Int
VECTOR ADDRESS 0xFFE4 TIMAOv_Int
VECTOR ADDRESS 0xFFE2 TIMBCh0_Int
VECTOR ADDRESS 0xFFE0 TIMBCh1_Int
VECTOR ADDRESS 0xFFDE TIMBOv_Int
VECTOR ADDRESS 0xFFDC AD_Int
VECTOR ADDRESS 0xFFDA SPIRec_Int
VECTOR ADDRESS 0xFFD8 SPITr_Int
VECTOR ADDRESS 0xFFD6 SCIErr_Int
VECTOR ADDRESS 0xFFD4 SCI_Int
VECTOR ADDRESS 0xFFD2 SCITr_Int