cli_mlprivres.h

命令行在嵌入式系统的实现

/************************************************************************
Copyright 200X - 200X+1.

filename     : Cli_MlPrivRes.h

description  : 命令行模块的多语种的资源头文件.

author       : Woodhead

modification : Woodhead    create              2004-12-07
************************************************************************/

/*   终端管理部分语种资源定义       */
/*----------------------------------*/
ML_MSTRING(CLI_TERMINAL_COLLISION,  "\r\n  This user is operating at another terminal. Kick it out? ",\
                                    "\r\n  有另一个终端正在使用该用户操作, 是否注销该终端? ")

ML_MSTRING(CLI_TERMINAL_KICK_OUT ,  "\r\n  Are you sure to disconnect this user? ",\
                                    "\r\n  确定踢出该终端用户?")
ML_MSTRING(CLI_TERMINAL_KICK_SELF , "\r\n  Cannot disconnect yourself by this operation.",\
                                    "\r\n  不能通过此操作断开当前用户.")

ML_MSTRING(CLI_TERMINAL_KICKED_OFF, "\r\n\r\n  You have been kicked off!\r\n",\
                                    "\r\n\r\n  该终端被已被其他人强行注销!\r\n")

ML_MSTRING(CLI_LOGOUT_NOTE,         "\r\n\r\n  You have quitted from system. \r\n  Please login again.", \
                                    "\r\n\r\n  你已从系统退出. \r\n  请重新登录.")
ML_MSTRING(CLI_ANYKEY_CONTINUE,     "\r\n  Press any key to continue.", \
                                    "\r\n  按任意键继续.")


ML_MSTRING(CLI_TELNET_CLIENT_REFUSED,   "\r\n  Telnet client ip %s is denied.",  \
                                        "\r\n  Telnet客户端地址%s的访问被禁止.")

ML_MSTRING(CLI_LOGED_OEM_VENDOR_INFO,  "\r\n\r\n  Copyright (c) 2003-2010, %s. ",\
                                       "\r\n\r\n  版权所有 (c) 2003-2010, %s ")

ML_MSTRING(CLI_LOGED_INFO,          "\r\n  Soft Version : %s" \
                                    "\r\n  Welcome to command line system! ",\
                                    "\r\n  软件版本: %s" \
                                    "\r\n  欢迎进入命令行操作系统!")

ML_MSTRING(CLI_MONITOR_ENABLE,      "\r\n\r\n  Monitor function is enabled.",\
                                    "\r\n\r\n  调试开关已经使能.")
ML_MSTRING(CLI_MONITOR_DISABLE,     "\r\n\r\n  Monitor function is disabled.",\
                                    "\r\n\r\n  调试开关已经关闭.")

ML_MSTRING(CLI_TIMEOUT_LONG,        "\r\n\r\n  Timeout set long. User will exit if no operation in 120 minutes.",\
                                    "\r\n\r\n  设定为长超时. 在120分钟之内无操作用户将自动退出.")
ML_MSTRING(CLI_TIMEOUT_SHORT,       "\r\n\r\n  Timeout set short. User will exit if no operation in 5 minutes.",\
                                    "\r\n\r\n  设定为短超时. 在5分钟之内无操作用户将自动退出.")
ML_MSTRING(CLI_TIMEOUT_TELNET_FAIL, "\r\n\r\n  This command can't be executed at telnet terminal. \r\n  User will exit if no operation in 5 minutes.",\
                                    "\r\n\r\n  Telnet终端不支持长超时功能. \r\n  5分钟不操作将超时退出.")

ML_MSTRING(CLI_HOSTNAME_NULL,       "\r\n  Hostname get failed.",\
                                    "\r\n  设备名获取失败.")
ML_MSTRING(CLI_SEND_TO_SLAVE_FAIL,  "\r\n  Send command to slave node %d failed.",\
                                    "\r\n  发送命令到从节点%d失败.")

ML_MSTRING(CLI_SMART_ENABLE,        "\r\n\r\n  Interactive function is enabled.",\
                                    "\r\n\r\n  交互开关已经使能.")
ML_MSTRING(CLI_SMART_DISABLE,       "\r\n\r\n  Interactive function is disabled.",\
                                    "\r\n\r\n  交互开关已经关闭.")

ML_MSTRING(CLI_SCROLL_ENABLE,       "\r\n\r\n  Set screen output scroll manual.",\
                                    "\r\n\r\n  已设置屏幕输出手动上卷.")
ML_MSTRING(CLI_SCROLL_DISABLE,      "\r\n\r\n  Set screen output scroll automatic.",\
                                    "\r\n\r\n  已设置屏幕输出自动上卷.")

ML_MSTRING(CLI_CLIENT_NO_ONLINE,    "\r\n\r\n  No telnet client is logging in.", \
                                    "\r\n\r\n  没有Telnet用户正在操作.")
ML_MSTRING(CLI_TELNET_ACL_UNFIND,   "\r\n\r\n  Can not find the telnet access item.",\
                                    "\r\n\r\n  找不到对应的IP访问表项.")
ML_MSTRING(CLI_LOGOUT_CONFIRM,      "\r\n\r\n  Are you sure to logout?",\
                                    "\r\n\r\n  确认要退出系统?")
ML_MSTRING(CLI_WAIT_RESP_TIMEOUT,   "\r\n\r\n  Waiting for response timeout.",\
                                    "\r\n\r\n  等待响应超时.")
ML_MSTRING(CLI_BAUDRATE_SETTING,    "\r\n\r\n  The baudrate of serial will be turned to %dBps."\
                                    "\r\n  And you should modify the baudrate of serial terminal to adapt it.",\
                                    "\r\n\r\n  串口的波特率将被修改为%dBps."\
                                    "\r\n  请修改串口终端的波特率到相应值以正常通信.")
ML_MSTRING(CLI_BAUDRATE_SET_ERR,    "\r\n\r\n  The baudrate can be modified only at serial terminal.",\
                                    "\r\n\r\n  波特率的修改只能在串口终端上进行.")


/*----------------------------------*/
/*    输入输出部分语种资源定义      */
/*----------------------------------*/
ML_MSTRING(CLI_INPUT_CONFIRM_ERROR,  "\r\n  Error input!", \
                                     "\r\n  错误的输入!")
ML_MSTRING(CLI_INPUT_CONFIRM_TIMEOUT,"\r\n  Input timeout!", \
                                     "\r\n  输入超时!")
ML_MSTRING(CLI_LANGUAGE_CHANGED,     "\r\n\r\n  Language has been changed, current language is English.", \
                                     "\r\n\r\n  语种已经切换, 当前语种为简体中文.")


/*----------------------------------*/
/*    用户与日志部分语种资源定义    */
/*----------------------------------*/
ML_MSTRING(CLI_LOG_HEAD_DISP,       "\r\n Operation                 Username  Log Mode  Client IP     Date     Time", \
                                    "\r\n 操作                      用户名    登录方式  终端IP        日期     时间")

ML_MSTRING(CLI_LOG_TABLE_ITEM,      "\r\n %-25s %-9s %-7s %-15s %-18s",\
                                    "\r\n %-25s %-9s %-7s %-15s %-18s")

ML_MSTRING(CLI_USER_HEAD_DISP,      "\r\n\r\n User Name       Level    Language Status Log Mode Log Ip    Password life time",\
                                    "\r\n\r\n 用户名          级别     惯用语种 状态   登录方式 登录IP          密码有效期限")

ML_MSTRING(CLI_USER_TABLE_ITEM,     "\r\n %-15s %-8s %-8s %-6s %-8s %-15s %-3dday(s)",\
                                    "\r\n %-15s %-8s %-8s %-6s %-8s %-15s %-3dday(s)")

ML_MSTRING(CLI_USERNAME_INPUT,      "\r\n  User name input: ", \
                                    "\r\n  用户名输入: ")
ML_MSTRING(CLI_USERNAME_IGNORED,    "\r\n  Username ignored, you will change the password of the current user.", \
                                    "\r\n  忽略用户名, 修改当前用户的密码.")
ML_MSTRING(CLI_PASSWORD_INPUT_OLD,  "\r\n  Old password input: ", \
                                    "\r\n  旧密码输入: ")
ML_MSTRING(CLI_PASSWORD_INPUT_NEW,  "\r\n  New password input: ", \
                                    "\r\n  新密码输入: ")
ML_MSTRING(CLI_PASSWORD_ERROR,      "\r\n  Error password! ", \
                                    "\r\n  密码错误!")
ML_MSTRING(CLI_PASSWORD_INPUT,      "\r\n  Password input: ", \
                                    "\r\n  密码输入: ")

ML_MSTRING(CLI_USER_LEVEL_INTUT,    "\r\n   1 -- Query \r\n   2 -- Operator \r\n   3 -- Administrator \r\n  Level input[1~3]: ", \
                                    "\r\n   1 -- 查询级\r\n   2 -- 操作级   \r\n   3 -- 管理级 \r\n  等级输入[1~3]: ")
ML_MSTRING(CLI_USER_TYPE_INPUT,     "\r\n   1 -- CLI \r\n   2 -- NMS \r\n  Type input[1~2]: ", \
                                    "\r\n   1 -- 命令行 \r\n   2 -- 网管  \r\n  类型输入[1~2]: ")
ML_MSTRING(CLI_PASSWORD_CONFIRM,    "\r\n  Password confirm: ", \
                                    "\r\n  密码确认: ")
ML_MSTRING(CLI_USER_PASSWORD_NULL,  "\r\n  User password can't be empty.", \
                                    "\r\n  用户密码不能为空.")
ML_MSTRING(CLI_PASSWORD_NOT_SAME,   "\r\n  Confirm password differs from password.", \
                                    "\r\n  两次输入的密码不一致. ")
ML_MSTRING(CLI_INPUT_NEED_NUM,      "\r\n  Please input number. Input again[1~%d]: ", \
                                    "\r\n  请输入数字. 请重新输入[1~%d]: ")
ML_MSTRING(CLI_INPUT_OVERFLOW,      "\r\n  Input out of range. Input again[1~%d]: ", \
                                    "\r\n  输入超出范围. 请重新输入[1~%d]: ")
ML_MSTRING(CLI_USER_DEL_FAILED,     "\r\n  User delete failed.", \
                                    "\r\n  用户删除失败.")
ML_MSTRING(CLI_USER_DEL_ONLINE,     "\r\n  Cannot delete an online user.", \
                                    "\r\n  不能删除在线用户.")
ML_MSTRING(CLI_USER_TOO_BUSY,       "\r\n  This user is too busy, try it again after while.", \
                                    "\r\n  该用户状态繁忙，请稍后登录.")
ML_MSTRING(CLI_USER_HAS_EXISTED,    "\r\n\r\n  The user has existed.", \
                                    "\r\n\r\n  该用户已经存在.")
ML_MSTRING(CLI_USER_HAS_NO_RIGHT,   "\r\n\r\n  You have no right to operate the user of this level.", \
                                    "\r\n\r\n  你没有权限操作此级别的用户.")

ML_MSTRING(CLI_USER_NOT_EXISTED,    "\r\n\r\n  No such user.", \
                                    "\r\n\r\n  该用户不存在.")
ML_MSTRING(CLI_USER_ONLINE,         "\r\n\r\n  The user is online.", \
                                    "\r\n\r\n  用户在线.")
ML_MSTRING(CLI_USER_NOT_ONLINE ,    "\r\n\r\n  User is already offline.", \
                                    "\r\n\r\n  用户已经下线.")