makefile.in

来自「cygwin, 著名的在win32下模拟unix操作系统的东东」· IN 代码 · 共 628 行 · 第 1/2 页

	@$(NORMAL_UNINSTALL)
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
	done

dist-info: $(INFO_DEPS)
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in `cd $$d && eval echo $$base*`; do \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -f libm.aux libm.cp libm.cps libm.dvi libm.fn libm.fns libm.ky \
	  libm.kys libm.ps libm.log libm.pg libm.toc libm.tp libm.tps \
	  libm.vr libm.vrs libm.op libm.tr libm.cv libm.cn

clean-aminfo:

distclean-aminfo:

maintainer-clean-aminfo:
	for i in $(INFO_DEPS); do \
	  rm -f $$i; \
	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
	    rm -f $$i-[0-9]*; \
	  fi; \
	done
clean-info: mostlyclean-aminfo

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" = "." && dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(DIST_SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
info-am: $(INFO_DEPS)
info: info-recursive
dvi-am: $(DVIS)
dvi: dvi-recursive
check-am:
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-info-am: 
install-info: install-info-recursive
install-exec-am:
install-exec: install-exec-recursive

install-data-am:
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile $(LIBRARIES) $(LTLIBRARIES)
all-redirect: all-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:


mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
		mostlyclean-libtool mostlyclean-noinstLTLIBRARIES \
		mostlyclean-aminfo mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-noinstLIBRARIES clean-compile clean-libtool \
		clean-noinstLTLIBRARIES clean-aminfo clean-tags \
		clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-noinstLIBRARIES distclean-compile \
		distclean-libtool distclean-noinstLTLIBRARIES \
		distclean-aminfo distclean-tags distclean-generic \
		clean-am
	-rm -f libtool

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-noinstLTLIBRARIES \
		maintainer-clean-aminfo maintainer-clean-tags \
		maintainer-clean-generic distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
clean-libtool maintainer-clean-libtool mostlyclean-noinstLTLIBRARIES \
distclean-noinstLTLIBRARIES clean-noinstLTLIBRARIES \
maintainer-clean-noinstLTLIBRARIES install-info-am uninstall-info \
mostlyclean-aminfo distclean-aminfo clean-aminfo \
maintainer-clean-aminfo install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-info-am \
install-info install-exec-am install-exec install-data-am install-data \
install-am install uninstall-am uninstall all-redirect all-am all \
installdirs-am installdirs mostlyclean-generic distclean-generic \
clean-generic maintainer-clean-generic clean mostlyclean distclean \
maintainer-clean

@USE_LIBTOOL_FALSE@libm.a: $(SUBLIBS)
@USE_LIBTOOL_FALSE@	rm -f $@
@USE_LIBTOOL_FALSE@	rm -rf tmp
@USE_LIBTOOL_FALSE@	mkdir tmp
@USE_LIBTOOL_FALSE@	cd tmp; \
@USE_LIBTOOL_FALSE@	  for i in $(SUBLIBS); do \
@USE_LIBTOOL_FALSE@	    $(AR) x ../$$i; \
@USE_LIBTOOL_FALSE@	done; \
@USE_LIBTOOL_FALSE@	$(AR) $(AR_FLAGS) ../$@ *.o
@USE_LIBTOOL_FALSE@	$(RANLIB) $@
@USE_LIBTOOL_FALSE@	rm -rf tmp

$(SUBLIBS):

libm.info: targetdep.tex math/stmp-def

stmp-targetdep: force
	rm -f tmp.texi
	targetdoc=`pwd`/tmp.texi; \
	for d in $(SUBDIRS); do \
	  if test "$$d" != "."; then \
	    (cd $$d && $(MAKE) doc) || exit 1; \
	  fi; \
	done
	$(SHELL) $(newlib_basedir)/../move-if-change tmp.texi targetdep.tex
	touch $@

targetdep.tex: stmp-targetdep ; @true

math/stmp-def: stmp-targetdep ; @true

.PHONY: force
force:

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: