tty.h

LINUX 1.0 内核c源代码

#define L_IEXTEN(tty)	_L_FLAG((tty),IEXTEN)

/*
 * Where all of the state associated with a tty is kept while the tty
 * is open.  Since the termios state should be kept even if the tty
 * has been closed --- for things like the baud rate, etc --- it is
 * not stored here, but rather a pointer to the real state is stored
 * here.  Possible the winsize structure should have the same
 * treatment, but (1) the default 80x24 is usually right and (2) it's
 * most often used by a windowing system, which will set the correct
 * size each time the window is created or resized anyway.
 * IMPORTANT: since this structure is dynamically allocated, it must
 * be no larger than 4096 bytes.  Changing TTY_BUF_SIZE will change
 * the size of this structure, and it needs to be done with care.
 * 						- TYT, 9/14/92
 */
struct tty_struct {
	struct termios *termios;
	int pgrp;
	int session;
	unsigned char stopped:1, hw_stopped:1, packet:1, lnext:1;
	unsigned char char_error:3;
	unsigned char erasing:1;
	unsigned char ctrl_status;
	short line;
	int disc;
	int flags;
	int count;
	unsigned int column;
	struct winsize winsize;
	int  (*open)(struct tty_struct * tty, struct file * filp);
	void (*close)(struct tty_struct * tty, struct file * filp);
	void (*write)(struct tty_struct * tty);
	int  (*ioctl)(struct tty_struct *tty, struct file * file,
		    unsigned int cmd, unsigned long arg);
	void (*throttle)(struct tty_struct * tty, int status);
	void (*set_termios)(struct tty_struct *tty, struct termios * old);
	void (*stop)(struct tty_struct *tty);
	void (*start)(struct tty_struct *tty);
	void (*hangup)(struct tty_struct *tty);
	struct tty_struct *link;
	unsigned char *write_data_ptr;
	int write_data_cnt;
	void (*write_data_callback)(void * data);
	void * write_data_arg;
	int readq_flags[TTY_BUF_SIZE/32];
	int secondary_flags[TTY_BUF_SIZE/32];
	int canon_data;
	unsigned long canon_head;
	unsigned int canon_column;
	struct tty_queue read_q;
	struct tty_queue write_q;
	struct tty_queue secondary;
	void *disc_data;
};

struct tty_ldisc {
	int	flags;
	/*
	 * The following routines are called from above.
	 */
	int	(*open)(struct tty_struct *);
	void	(*close)(struct tty_struct *);
	int	(*read)(struct tty_struct * tty, struct file * file,
			unsigned char * buf, unsigned int nr);
	int	(*write)(struct tty_struct * tty, struct file * file,
			 unsigned char * buf, unsigned int nr);	
	int	(*ioctl)(struct tty_struct * tty, struct file * file,
			 unsigned int cmd, unsigned long arg);
	int	(*select)(struct tty_struct * tty, struct inode * inode,
			  struct file * file, int sel_type,
			  struct select_table_struct *wait);
	/*
	 * The following routines are called from below.
	 */
	void	(*handler)(struct tty_struct *);
};

#define LDISC_FLAG_DEFINED	0x00000001

/*
 * These are the different types of thottle status which can be sent
 * to the low-level tty driver.  The tty_io.c layer is responsible for
 * notifying the low-level tty driver of the following conditions:
 * secondary queue full, secondary queue available, and read queue
 * available.  The low-level driver must send the read queue full
 * command to itself, if it is interested in that condition.
 *
 * Note that the low-level tty driver may elect to ignore one or both
 * of these conditions; normally, however, it will use ^S/^Q or some
 * sort of hardware flow control to regulate the input to try to avoid
 * overflow.  While the low-level driver is responsible for all
 * receiving flow control, note that the ^S/^Q handling (but not
 * hardware flow control) is handled by the upper layer, in
 * copy_to_cooked.  
 */
#define TTY_THROTTLE_SQ_FULL	1
#define TTY_THROTTLE_SQ_AVAIL	2
#define TTY_THROTTLE_RQ_FULL	3
#define TTY_THROTTLE_RQ_AVAIL	4

/*
 * This defines the low- and high-watermarks for the various conditions.
 * Again, the low-level driver is free to ignore any of these, and has
 * to implement RQ_THREHOLD_LW for itself if it wants it.
 */
#define SQ_THRESHOLD_LW	16
#define SQ_THRESHOLD_HW 768
#define RQ_THRESHOLD_LW 16
#define RQ_THRESHOLD_HW 768

/*
 * These bits are used in the flags field of the tty structure.
 * 
 * So that interrupts won't be able to mess up the queues,
 * copy_to_cooked must be atomic with repect to itself, as must
 * tty->write.  Thus, you must use the inline functions set_bit() and
 * clear_bit() to make things atomic.
 */
#define TTY_WRITE_BUSY 0
#define TTY_READ_BUSY 1
#define TTY_SQ_THROTTLED 2
#define TTY_RQ_THROTTLED 3
#define TTY_IO_ERROR 4
#define TTY_SLAVE_CLOSED 5
#define TTY_EXCLUSIVE 6

/*
 * When a break, frame error, or parity error happens, these codes are
 * stuffed into the read queue, and the relevant bit in readq_flag bit
 * array is set.
 */
#define TTY_BREAK	1
#define TTY_FRAME	2
#define TTY_PARITY	3
#define TTY_OVERRUN	4

#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
#define TTY_READ_FLUSH(tty) tty_read_flush((tty))

extern void tty_write_flush(struct tty_struct *);
extern void tty_read_flush(struct tty_struct *);

/* Number of chars that must be available in a write queue before
   the queue is awakened. */
#define WAKEUP_CHARS (3*TTY_BUF_SIZE/4)

extern struct tty_struct *tty_table[];
extern struct termios *tty_termios[];
extern struct termios *termios_locked[];
extern int tty_check_write[];
extern struct tty_struct * redirect;
extern struct tty_ldisc ldiscs[];
extern int fg_console;
extern unsigned long video_num_columns;
extern unsigned long video_num_lines;
extern struct wait_queue * keypress_wait;

#define TTY_TABLE_IDX(nr)	((nr) ? (nr) : (fg_console+1))
#define TTY_TABLE(nr) 		(tty_table[TTY_TABLE_IDX(nr)])

/*	intr=^C		quit=^|		erase=del	kill=^U
	eof=^D		vtime=\0	vmin=\1		sxtc=\0
	start=^Q	stop=^S		susp=^Z		eol=\0
	reprint=^R	discard=^U	werase=^W	lnext=^V
	eol2=\0
*/
#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"

extern long rs_init(long);
extern long lp_init(long);
extern long con_init(long);
extern long tty_init(long);

extern void flush_input(struct tty_struct * tty);
extern void flush_output(struct tty_struct * tty);
extern void wait_until_sent(struct tty_struct * tty, int timeout);
extern int check_change(struct tty_struct * tty, int channel);
extern void stop_tty(struct tty_struct * tty);
extern void start_tty(struct tty_struct * tty);
extern int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc);
extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
			     int buflen);
extern int tty_write_data(struct tty_struct *tty, char *bufp, int buflen,
			  void (*callback)(void * data), void * callarg);

extern int tty_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
extern int is_orphaned_pgrp(int pgrp);
extern int is_ignored(int sig);
extern int tty_signal(int sig, struct tty_struct *tty);
extern void tty_hangup(struct tty_struct * tty);
extern void tty_vhangup(struct tty_struct * tty);
extern void tty_unhangup(struct file *filp);
extern int tty_hung_up_p(struct file * filp);
extern void do_SAK(struct tty_struct *tty);
extern void disassociate_ctty(int priv);

/* tty write functions */

extern void rs_write(struct tty_struct * tty);
extern void con_write(struct tty_struct * tty);

/* serial.c */

extern int  rs_open(struct tty_struct * tty, struct file * filp);

/* pty.c */

extern int  pty_open(struct tty_struct * tty, struct file * filp);

/* console.c */

extern int con_open(struct tty_struct * tty, struct file * filp);
extern void update_screen(int new_console);
extern void blank_screen(void);
extern void unblank_screen(void);

/* vt.c */

extern int vt_ioctl(struct tty_struct *tty, struct file * file,
		    unsigned int cmd, unsigned long arg);

#endif