changelog

eCos1.31版

2000-03-20  John Dallaway  <[e-mail]>

	* cdl/hal.cdl:

	Adjust documentation URLs.

2000-03-01  Gary Thomas  <[e-mail]>

	* cdl/common.cdl: 
	Define CYGINT_HAL_DIAG_DISABLE_GDB_PROTOCOL_SUPPORTED as an
	'interface' so implementations can be properly specified.

2000-02-29  Gary Thomas  <[e-mail]>

	* cdl/common.cdl: Option to disable GDB protocol now supported
	by QUICC based PowerPC systems.

2000-02-29  Jonathan Larmour  <[e-mail]>

	* include/generic-stub.h: Make header C++ safe

2000-02-16  Jesper Skov  <[e-mail]>

	* include/hal_stub.h: fixed endian definitions.

2000-02-10  Jesper Skov  <[e-mail]>

	* include/pkgconf/hal.h: Added CYGSEM_HAL_ROM_MONITOR
	* src/hal_stub.c (initHardware): CYG_HAL_STARTUP_STUBS ->
	CYGSEM_HAL_ROM_MONITOR.
	Removed HAL_STUB_PLATFORM_STUBS_INIT.

2000-02-09  Jesper Skov  <[e-mail]>

	* cdl/hal.cdl: Added remaining build dependencies.

2000-02-04  Jesper Skov  <[e-mail]>

	* cdl/hal.cdl: Fix test list display.

2000-02-03  Jesper Skov  <[e-mail]>

	* include/pkgconf/hal.h: CYG_HAL_POWERPC_x->CYGPKG_...

2000-02-03  Jesper Skov  <[e-mail]>

	* cdl/debugging.cdl: Use interfaces for stub capabilities instead
	of exclude list.
	* cdl/hal.cdl: Add extra dependencies to common stub build rule.
	
2000-02-02  Jesper Skov  <[e-mail]>

	* cdl/hal.cdl: Added HAL tests.

2000-01-31 Simon FitzMaurice  <[e-mail]>
  * cdl/hal.cdl:

  Adjust help URLs in line with new doc layout.

2000-01-28 Simon FitzMaurice  <[e-mail]>
  * cdl/hal.cdl:

  Adjust help URLs in line with new doc layout.

2000-01-27  Jesper Skov  <[e-mail]>

	* cdl/hal.cdl: Added simple build rules for common stub.

2000-01-26  Jonathan Larmour  <[e-mail]>

	* src/hal_stub.c (__reset): Replace CYGDAT_CYGMON_ENABLE
	dependency with just CYGPKG_CYGMON
	(initHardware): Likewise
	(__set_baud_rate): Likewise
	(putDebugChar): Likewise

2000-01-17  John Dallaway  <[e-mail]>

	* cdl/common.cdl,
	  cdl/debugging.cdl:

	Modify the default_value attribute for
	CYGFUN_HAL_COMMON_KERNEL_SUPPORT, CYGPKG_HAL_EXCEPTIONS
	and CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT to do the right
	thing in the absence of the eCos kernel package.

1999-12-22  John Dallaway  <[e-mail]>

	* cdl/hal.cdl:

	Add CFLAGS to the custom rule for extras.o to accommodate
	arm big-endian targets.

1999-12-21  Jonathan Larmour  <[e-mail]>

	* include/pkgconf/hal.h: Rename all CYG_HAL_USE_ROM_MONITOR_GDB_STUBS
	-> CYGSEM_HAL_USE_ROM_MONITOR_GDB_stubs
	Rename all CYG_HAL_USE_ROM_MONITOR_CYGMON -> 
	CYGSEM_HAL_USE_ROM_MONITOR_CygMon
	Rename all CYG_HAL_USE_ROM_MONITOR -> CYGSEM_HAL_USE_ROM_MONITOR
	Don't need to define CYG_HAL_SH_SH7708 any more

	* cdl/hal.cdl: Add CYGPKG_HAL_ROM_MONITOR container package for
	platforms to put ROM-monitor related options into
	Move all ROM-monitor related options into individual platform CDL

1999-12-02  John Dallaway  <[e-mail]>

	* cdl/hal.cdl:

	Use '$<' to reference custom rule dependency.

1999-12-01  John Dallaway  <[e-mail]>

	* cdl/hal.cdl:

	Use the <PREFIX> token in custom rules.

1999-11-29  John Dallaway  <[e-mail]>

	* cdl/hal.cdl:

	Use wildcard in the custom rule for extras.o to
	accommodate 'make -n'.

1999-11-23  Simon Fitzmaurice <[e-mail]>
	* cdl\common.cdl: Correct example of illiteracy

1999-11-20  Gary Thomas  <[e-mail]>
	
	* cdl/common.cdl: Add MMU tables options.

	* include/pkgconf/hal.h (CYGSEM_HAL_INSTALL_MMU_TABLES): 
	(CYGSEM_HAL_STATIC_MMU_TABLES): New options to control MMU table
	flavour and placement.

1999-11-15  Jonathan Larmour  <[e-mail]>

	* include/dbg-threads-api.h, include/generic-stub.h,
	include/hal_stub.h: Add comments to explain these header files should
	not be included by user programs

1999-11-09  Gary Thomas  <[e-mail]>

	* cdl/common.cdl: Add CYGDBG_HAL_DIAG_DISABLE_GDB_PROTOCOL.
	
	* include/pkgconf/hal.h (CYGDBG_HAL_DIAG_DISABLE_GDB_PROTOCOL): 
	New option which [explicitly] controls use of GDB protocol
	for diagnostic I/O.

1999-11-03  Jesper Skov  <[e-mail]>

	* cdl/hal.cdl: More crud out + mn10300 fixes.

1999-11-02  Jesper Skov  <[e-mail]>

	* cdl/hal.cdl: Cleaned out some of the CPU config entries.

1999-10-29  Gary Thomas  <[e-mail]>

	* tests/PKGconf.mak: Add cache tests for Cirrus Logic boards.

1999-10-29  Jesper Skov  <[e-mail]>

	* tests/cache.c: Made safe for targets with no cache.

	* tests/PKGconf.mak: Don't build cache test for ARM unless
	explicitly enabled.

1999-10-28  Jesper Skov  <[e-mail]>

	* tests/cache.c: Fix array size.

1999-10-27  Gary Thomas  <[e-mail]>

	* src/hal_stub.c: Fix typo (CYGDAT_CYGMON_ENABLE).  Also need
	to include <pkgconf/cygmon.h>

1999-10-27  Gary Thomas  <[e-mail]>

	* src/hal_stub.c: Add explicit enable for CygMon package.

1999-10-27  Hugo Tyson  <[e-mail]>

	* src/hal_stub.c (cyg_hal_gdb_interrupt): Bugfix to previous: ^Cs
	were being ignored when received by the diag output code, because
	there was already a break in place.  Solution is to let
	cyg_hal_gdb_interrupt() override any previous break, and tidy up
	state of course.

1999-10-26  Hugo Tyson  <[e-mail]>

	* include/hal_stub.h (CYG_HAL_GDB_ENTER_CRITICAL_IO_REGION): Place
	the break at the address of a label within the calling context
	[normally hal_diag_write_char()]; this is neater and more
	portable; it's supported for more targets.  Also use
	cyg_hal_place_break() to place it, define that, &c.

	* src/hal_stub.c (cyg_hal_gdb_place_break): New routine to
	specially handle the inline breakpoint.  It basically does the
	same as cyg_hal_gdb_interrupt(), except on some platforms where
	you must do different things to set a bp from a non-interrupt
	context.

1999-10-25  Gary Thomas  <[e-mail]>

	* src/hal_stub.c (putDebugChar, getDebugChar): When building with
	CygMon, these functions are defined by CygMon.

1999-10-26  John Dallaway  <[e-mail]>

	* cdl/hal.cdl:

	Modify custom make rule to specify file paths relative
	to the package version directory.

1999-10-22  Hugo Tyson  <[e-mail]>

	* include/hal_stub.h (CYG_HAL_GDB_ENTER_CRITICAL_IO_REGION):
	(CYG_HAL_GDB_LEAVE_CRITICAL_IO_REGION): new macros to be invoked
	in hal_diag routines to make atomic the code that outputs a
	complete GDB $O packet.  This is required so that watching
	variables (which is implemented by stepping) and stepping itself
	does not try to ss through that $O output code.  CASE 102327.

	* src/hal_stub.c (cyg_hal_gdb_break_is_set): new routine to query
	whether a break is set: used by step in the stubs to decide to
	continue instead, because we are in a critical region.
	(cyg_hal_gdb_running_step): communication between generic stub and
	here: if set, a step has been converted into a continue, so we do
	NOT obey cyg_hal_gdb_remove_break until it is cleared, in
	handle_exception_cleanup().

	* src/generic-stub.c (__process_packet): If there is a break set
	by the hal_stub.c, convert a step to continue, and set
	cyg_hal_gdb_running_step to say we did so.

1999-10-22  Jesper Skov  <[e-mail]>
        Case 102379
	* src/generic-stub.c (__handle_exception): Flush and clear caches
	after cleaning up after single-stepping.

	(memcpy, memset): Added to prevent stub hanging if user puts
	breakpoints in either function.

1999-10-19  Nick Garnett  <[e-mail]>

	* include/pkgconf/hal.h: Added monitor configury for Brother
	board.
	
1999-10-10  Gary Thomas  <[e-mail]>

	* src/thread-packets.c (stub_pkt_currthread): Fix typo in comment.

	* src/generic-stub.c: Reorg to expose register get/set functions.

1999-10-08  Simon Fitzmaurice <[e-mail]>
	* cdl\interrupts.cdl: Quoted '[' and ']' (significant in TCL and thus CDL)

1999-10-08  Jesper Skov  <[e-mail]>

	* cdl/interrupts.cdl: Added
	CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS.

1999-09-22  Simon FitzMaurice <[e-mail]>

	* cdl\hal.cdl : add priority field to "extras.o" rule

1999-09-21  Gary Thomas  <[e-mail]>

	* src/thread-packets.c: Fix some typos in comments.

1999-09-15  Jesper Skov  <[e-mail]>

	* src/hal_stub.c: Override generic GDB interrupt functions for
	ARM. Need them to be thumb aware. 

1999-09-13  Gary Thomas  <[e-mail]>

	* include/pkgconf/hal.h: Add new config option to allow spurious
	interrupts to be ignored by the HAL.

	* src/generic-stub.c (__process_packet): Build in version string
	(date/time) for stubs in ROM to be returned via 'd' packet.

1999-09-09  Jonathan Larmour  <[e-mail]>

	* include/pkgconf/hal.h (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS): Rename
	CYGPKG_HAL_MN10300_SIM to CYGPKG_HAL_MN10300_AM31_SIM

1999-09-07  Nick Garnett  <[e-mail]>

	* src/dbg-threads-syscall.c (dbg_currthread_id): Fixed to return
	zero if dbg_currthread() returns false. Previously it could have
	returned a random value which would have made GDB think there had
	been a thread switch when there hadn't. It was particularly prone
	to do this in configurations where the kernel was absent.

1999-09-01  Gary Thomas  <[e-mail]>

	* include/pkgconf/hal.h: Always include target and platform package
	include (pkgconf) files.

1999-08-26  Jonathan Larmour  <[e-mail]>

	* src/generic-stub.c (__hex2mem_helper):
	Use target_register_t when casting to address type, rather than long
	Since the compiler can choose arbitrary alignment of unions, force
	to use byte array only
	Restore use of loop termination test for *hexMemSrc, just in case
	since that's how it used to be
	Increment destination, not source at end of loop
	
	(__mem2hex_helper):
	Use target_register_t when casting to address type, rather than long.
	Since the compiler can choose arbitrary alignment of unions, force
	to use byte array only. Therefore use single __read_mem_safe() call
	
	* src/hal_stub.c (__do_copy_mem): Reassign back from dst/src at start
	of each	"if" clause in case we go round the loop again.

1999-08-24  Gary Thomas  <[e-mail]>

	* src/hal_stub.c (__do_copy_mem): Move temp variables to top of
	function - potentially safer if there is an error.

1999-08-23  Jonathan Larmour  <[e-mail]>

	* src/generic-stub.c (__process_packet): For 'g' and 'G' packets,
	when the register size differs from sizeof(target_register_t) we must
	adjust according to the endianness 

	* include/hal_stub.h: Ensure __LITTLE_ENDIAN__ is defined on