hal_powerpc_mbx.cdl

eCos1.31版

# ====================================================================
#
#      hal_powerpc_mbx.cdl
#
#      PowerPC/MBX board HAL package configuration data
#
# ====================================================================
#####COPYRIGHTBEGIN####
#                                                                          
# -------------------------------------------                              
# The contents of this file are subject to the Red Hat eCos Public License 
# Version 1.1 (the "License"); you may not use this file except in         
# compliance with the License.  You may obtain a copy of the License at    
# http://www.redhat.com/                                                   
#                                                                          
# Software distributed under the License is distributed on an "AS IS"      
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
# License for the specific language governing rights and limitations under 
# the License.                                                             
#                                                                          
# The Original Code is eCos - Embedded Configurable Operating System,      
# released September 30, 1998.                                             
#                                                                          
# The Initial Developer of the Original Code is Red Hat.                   
# Portions created by Red Hat are                                          
# Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
# All Rights Reserved.                                                     
# -------------------------------------------                              
#                                                                          
#####COPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      jskov
# Original data:  hmt
# Contributors:
# Date:           1999-11-02
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_HAL_POWERPC_MBX {
    display       "Motorola MBX PowerPC evaluation board"
    parent        CYGPKG_HAL_POWERPC
    requires      CYGPKG_HAL_POWERPC_MPC8xx
    define_header hal_powerpc_mbx.h
    include_dir   cyg/hal
    description   "
        The MBX HAL package provides the support needed to run
        eCos on a Motorola MBX board equipped with a PowerPC processor."

    compile       hal_diag.c hal_aux.c mbx.S

    implements    CYGINT_HAL_DEBUG_GDB_STUBS
    implements    CYGINT_HAL_DEBUG_GDB_STUBS_BREAK

    define_proc {
        puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H   <pkgconf/hal_powerpc_mpc8xx.h>"
        puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H <pkgconf/hal_powerpc_mbx.h>"
    }

    cdl_component CYG_HAL_STARTUP {
        display       "Startup type"
        flavor        data
        legal_values  {"RAM" "ROM"}
        default_value {"RAM"}
	no_define
	define -file system.h CYG_HAL_STARTUP
        description   "
           When targetting the FADS board for RAM bootstrap it is expected 
           that the image will be downloaded via the Motorola MPC8BUG tool."
    }

    cdl_option CYGHWR_HAL_POWERPC_BOARD_SPEED {
        display          "Development board clock speed (MHz)"
        flavor           data
        legal_values     40 50
        default_value    50
        description      "
           MBX Development Boards have various system clock speeds
           depending on the processor fitted.  Select the clock speed
           appropriate for your board so that the system can set the serial
           baud rate correctly, amongst other things."
   }

   cdl_option CYGHWR_HAL_POWERPC_MBX_BOOT_32BIT_FLASH {
       display          "Boot ROM is 32-bit Flash device"
       default_value    0
       description      "
           MBX Development Boards have a socketed 8-bit ROM (AM27F040,
           AM29F040 or similar) and a permanently soldered 32-bit flash
           device.  Which is used for booting is link selectable (refer to
           the MBX Series documentation from Motorola).  Enable this option
           when booting from the 32-bit flash so that the correct memory
           timing and access method is initialized.  This consideration
           does apply to RAM start eCos applications as well as ROM start
           or stub ROMs."
   }

    # Real-time clock/counter specifics
    cdl_component CYGNUM_HAL_RTC_CONSTANTS {
        display       "Real-time clock constants."
        description   "
            Period is busclock/16/100."
        flavor        none
    
        cdl_option CYGNUM_HAL_RTC_NUMERATOR {
            display       "Real-time clock numerator"
            flavor        data
            calculated    1000000000
        }
        cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
            display       "Real-time clock denominator"
            flavor        data
            calculated    100
        }
        cdl_option CYGNUM_HAL_RTC_PERIOD {
            display       "Real-time clock period"
            flavor        data
            calculated    { (((CYGHWR_HAL_POWERPC_BOARD_SPEED*1000000)/16)/100) }
        }
    }
    
    cdl_component CYGBLD_GLOBAL_OPTIONS {
        display "Global build options"
        flavor  none
        description   "
	    Global build options including control over
	    compiler flags, linker flags and choice of toolchain."


        parent  CYGPKG_NONE

        cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
            display "Global command prefix"
            flavor  data
            no_define
            default_value { "powerpc-eabi" }
            description "
                This option specifies the command prefix used when
                invoking the build tools."
        }

        cdl_option CYGBLD_GLOBAL_CFLAGS {
            display "Global compiler flags"
            flavor  data
            no_define
            default_value { "-msoft-float -mcpu=860 -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" }
            description   "
                This option controls the global compiler flags which
                are used to compile all packages by
                default. Individual packages may define
                options which override these global flags."
        }

        cdl_option CYGBLD_GLOBAL_LDFLAGS {
            display "Global linker flags"
            flavor  data
            no_define
            default_value { "-msoft-float -mcpu=860 -g -nostdlib -Wl,--gc-sections -Wl,-static" }
            description   "
                This option controls the global linker flags. Individual
                packages may define options which override these global flags."
        }

        cdl_option CYGBLD_BUILD_GDB_STUBS {
            display "Build GDB stub ROM image"
            default_value 0
            requires { CYG_HAL_STARTUP == "ROM" }
            requires CYGSEM_HAL_ROM_MONITOR
            requires CYGBLD_BUILD_COMMON_GDB_STUBS
            requires CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
            requires ! CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
            requires ! CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
            requires ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
            requires ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
            no_define
            description "
                This option enables the building of the GDB stubs for the
                board. The common HAL controls takes care of most of the
                build process, but the platform CDL takes care of creating
                an S-Record data file suitable for programming using
                the board's EPPC-Bug firmware monitor."

            make -priority 320 {
                <PREFIX>/bin/gdb_module.bin : <PREFIX>/bin/gdb_module.img
                $(OBJCOPY) -O srec --change-address=0x02040000 $< $(@:.bin=.srec)
                $(OBJCOPY) -O binary $< $@
            }
        }
    }

    cdl_component CYGPKG_HAL_POWERPC_MBX_OPTIONS {
        display "MBX build options"
        flavor  none
        description   "
	    Package specific build options including control over
	    compiler flags used only in building this package,
	    and details of which tests are built."


        cdl_option CYGPKG_HAL_POWERPC_MBX_CFLAGS_ADD {
            display "Additional compiler flags"
            flavor  data
            no_define
            default_value { "" }
            description   "
                This option modifies the set of compiler flags for
                building the MBX HAL. These flags are used in addition
                to the set of global flags."
        }

        cdl_option CYGPKG_HAL_POWERPC_MBX_CFLAGS_REMOVE {
            display "Supressed compiler flags"
            flavor  data
            no_define
            default_value { "" }
            description   "
                This option modifies the set of compiler flags for
                building the MBX HAL. These flags are removed from
                the set of global flags if present."
        }

        cdl_option CYGPKG_HAL_POWERPC_MBX_TESTS {
            display "MBX tests"
            flavor  data
            no_define
            calculated { "tests/mbxtime" }
            description   "
                This option specifies the set of tests for the MBX HAL."
        }
    }

    cdl_component CYGHWR_MEMORY_LAYOUT {
        display "Memory layout"
        flavor data
        no_define
        calculated { CYG_HAL_STARTUP == "RAM" ? "powerpc_mbx_ram" : \
                                                "powerpc_mbx_rom" }

        cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
            display "Memory layout linker script fragment"
            flavor data
            no_define
            define -file system.h CYGHWR_MEMORY_LAYOUT_LDI
            calculated { CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_powerpc_mbx_ram.ldi>" : \
                                                    "<pkgconf/mlt_powerpc_mbx_rom.ldi>" }
        }

        cdl_option CYGHWR_MEMORY_LAYOUT_H {
            display "Memory layout header file"
            flavor data
            no_define
            define -file system.h CYGHWR_MEMORY_LAYOUT_H
            calculated { CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_powerpc_mbx_ram.h>" : \
                                                    "<pkgconf/mlt_powerpc_mbx_rom.h>" }
        }
    }

    cdl_option CYGSEM_HAL_ROM_MONITOR {
        display       "Behave as a ROM monitor"
        flavor        bool
        default_value 0
        parent        CYGPKG_HAL_ROM_MONITOR
        requires      { CYG_HAL_STARTUP == "ROM" }
        description   "
            Enable this option if this program is to be used as a ROM monitor,
            i.e. applications will be loaded into RAM on the board, and this
            ROM monitor may process exceptions or interrupts generated from the
            application. This enables features such as utilizing a separate
            interrupt stack when exceptions are generated."
    }
}