instrument.cdl

eCos1.31版

# ====================================================================
#
#      instrument.cdl
#
#      configuration data related to the kernel instrumentation
#
# ====================================================================
#####COPYRIGHTBEGIN####
#                                                                          
# -------------------------------------------                              
# The contents of this file are subject to the Red Hat eCos Public License 
# Version 1.1 (the "License"); you may not use this file except in         
# compliance with the License.  You may obtain a copy of the License at    
# http://www.redhat.com/                                                   
#                                                                          
# Software distributed under the License is distributed on an "AS IS"      
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
# License for the specific language governing rights and limitations under 
# the License.                                                             
#                                                                          
# The Original Code is eCos - Embedded Configurable Operating System,      
# released September 30, 1998.                                             
#                                                                          
# The Initial Developer of the Original Code is Red Hat.                   
# Portions created by Red Hat are                                          
# Copyright (C) 1998, 1999, 2000 Red Hat, Inc.                             
# All Rights Reserved.                                                     
# -------------------------------------------                              
#                                                                          
#####COPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      jskov
# Original data:  nickg
# Contributors:
# Date:           1999-07-05
#
#####DESCRIPTIONEND####
#
# ====================================================================


cdl_option CYGNUM_KERNEL_INSTRUMENT_BUFFER_SIZE {
    display       "Size of instrumentation buffer size"
    flavor        data
    legal_values  16 to 0x100000
    default_value 256
    description   "
        If kernel instrumentation is enabled then the instrumentation
        data goes into a circular buffer. A larger buffer allows
        more data to be stored, but at a significant cost in memory.
        The value of this option corresponds to the number of entries
        in the table, and typically each entry will require 16 bytes
        of memory."
}

cdl_option CYGNUM_KERNEL_INSTRUMENT_BUFFER_WRAP {
    display       "Wrap instrument buffer"
    default_value 1
    description   "
        When the instrumentation buffer is full it can either be restarted
        from the beginning, overwriting older data, or it can stop at the
        end. The former is useful if you want to look at the last entries
        made while the latter is useful if you want to look at the first
        few."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_FLAGS {
    display       "Perform selective instrumentation"
    default_value 1
    description   "
        The kernel can either collect all instrumentation events, or
        it can filter out events at runtime based on a set of flags.
        For example it would be possible to decide at runtime that
        only scheduler and interrupt instrumentation flags are of
        interest and that all other flags should be ignored. This
        flag mechanism involves extra code and processor cycle
        overhead in the instrumentation code, so it can be disabled
        if the application developer is interested in all
        instrumentation events."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_SCHED {
    display       "Instrument the scheduler"
    default_value 1
    active_if     CYGPKG_KERNEL_SCHED
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the scheduling code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_THREAD {
    display       "Instrument thread operations"
    default_value 1
    active_if     CYGPKG_KERNEL_THREADS
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the code that manipulates threads."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_INTR {
    display       "Instrument interrupts"
    default_value 1
    active_if     CYGPKG_KERNEL_INTERRUPTS
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the interrupt handling code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_MUTEX {
    display       "Instrument mutex operations"
    default_value 1
    active_if     CYGPKG_KERNEL_SYNCH
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the mutex code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_CONDVAR {
    display       "Instrument condition variable operations"
    default_value 1
    active_if     CYGPKG_KERNEL_SYNCH
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the condition variable code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_BINSEM {
    display       "Instrument binary semaphore operations"
    default_value 1
    active_if     CYGPKG_KERNEL_SYNCH
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the binary semaphore code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_CNTSEM {
    display       "Instrument counting semaphore operations"
    default_value 1
    active_if     CYGPKG_KERNEL_SYNCH
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the counting semaphore code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_MBOXT {
    display       "Instrument message box operations"
    default_value 1
    active_if     CYGPKG_KERNEL_SYNCH
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the message box code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_CLOCK {
    display       "Instrument clock operations"
    default_value 1
    active_if     CYGVAR_KERNEL_COUNTERS_CLOCK
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the real-time clock code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_ALARM {
    display       "Instrument alarm-related operations"
    default_value 1
    active_if     CYGVAR_KERNEL_COUNTERS_CLOCK
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the code related to alarm operations."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_USER {
    display       "Support application-level instrumentation"
    default_value 1
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not application-level instrumentation gets
        compiled in."
}