📄 pg_crc.h
字号:
/* * pg_crc.h * * PostgreSQL 64-bit CRC support * * Portions Copyright (c) 1996-2003, PostgreSQL Global Development Group * Portions Copyright (c) 1994, Regents of the University of California * * $Id: pg_crc.h,v 1.9 2003/08/04 02:40:15 momjian Exp $ */#ifndef PG_CRC_H#define PG_CRC_H/* * If we have a 64-bit integer type, then a 64-bit CRC looks just like the * usual sort of implementation. (See Ross Williams' excellent introduction * A PAINLESS GUIDE TO CRC ERROR DETECTION ALGORITHMS, available from * ftp://ftp.rocksoft.com/papers/crc_v3.txt or several other net sites.) * If we have no working 64-bit type, then fake it with two 32-bit registers. * * The present implementation is a normal (not "reflected", in Williams' * terms) 64-bit CRC, using initial all-ones register contents and a final * bit inversion. The chosen polynomial is borrowed from the DLT1 spec * (ECMA-182, available from http://www.ecma.ch/ecma1/STAND/ECMA-182.HTM): * * x^64 + x^62 + x^57 + x^55 + x^54 + x^53 + x^52 + x^47 + x^46 + x^45 + * x^40 + x^39 + x^38 + x^37 + x^35 + x^33 + x^32 + x^31 + x^29 + x^27 + * x^24 + x^23 + x^22 + x^21 + x^19 + x^17 + x^13 + x^12 + x^10 + x^9 + * x^7 + x^4 + x + 1 */#ifdef INT64_IS_BUSTED/* * crc0 represents the LSBs of the 64-bit value, crc1 the MSBs. Note that * with crc0 placed first, the output of 32-bit and 64-bit implementations * will be bit-compatible only on little-endian architectures. If it were * important to make the two possible implementations bit-compatible on * all machines, we could do a configure test to decide how to order the * two fields, but it seems not worth the trouble. */typedef struct crc64{ uint32 crc0; uint32 crc1;} crc64;/* Initialize a CRC accumulator */#define INIT_CRC64(crc) ((crc).crc0 = 0xffffffff, (crc).crc1 = 0xffffffff)/* Finish a CRC calculation */#define FIN_CRC64(crc) ((crc).crc0 ^= 0xffffffff, (crc).crc1 ^= 0xffffffff)/* Accumulate some (more) bytes into a CRC */#define COMP_CRC64(crc, data, len) \do { \ uint32 __crc0 = (crc).crc0; \ uint32 __crc1 = (crc).crc1; \ unsigned char *__data = (unsigned char *) (data); \ uint32 __len = (len); \\ while (__len-- > 0) \ { \ int __tab_index = ((int) (__crc1 >> 24) ^ *__data++) & 0xFF; \ __crc1 = crc_table1[__tab_index] ^ ((__crc1 << 8) | (__crc0 >> 24)); \ __crc0 = crc_table0[__tab_index] ^ (__crc0 << 8); \ } \ (crc).crc0 = __crc0; \ (crc).crc1 = __crc1; \} while (0)/* Check for equality of two CRCs */#define EQ_CRC64(c1,c2) ((c1).crc0 == (c2).crc0 && (c1).crc1 == (c2).crc1)/* Constant table for CRC calculation */extern const uint32 crc_table0[];extern const uint32 crc_table1[];#else /* int64 works */typedef struct crc64{ uint64 crc0;} crc64;/* Initialize a CRC accumulator */#define INIT_CRC64(crc) ((crc).crc0 = UINT64CONST(0xffffffffffffffff))/* Finish a CRC calculation */#define FIN_CRC64(crc) ((crc).crc0 ^= UINT64CONST(0xffffffffffffffff))/* Accumulate some (more) bytes into a CRC */#define COMP_CRC64(crc, data, len) \do { \ uint64 __crc0 = (crc).crc0; \ unsigned char *__data = (unsigned char *) (data); \ uint32 __len = (len); \\ while (__len-- > 0) \ { \ int __tab_index = ((int) (__crc0 >> 56) ^ *__data++) & 0xFF; \ __crc0 = crc_table[__tab_index] ^ (__crc0 << 8); \ } \ (crc).crc0 = __crc0; \} while (0)/* Check for equality of two CRCs */#define EQ_CRC64(c1,c2) ((c1).crc0 == (c2).crc0)/* Constant table for CRC calculation */extern const uint64 crc_table[];#endif /* INT64_IS_BUSTED */#endif /* PG_CRC_H */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -