pmd5.cxx

使用stl技术,(还没看,是听说的)

    /* Round 1. */
    /* Let [abcd k s i] denote the operation
       a = b + ((a + F(b,c,d) + X[k] + T[i]) <<< s). */
#define F(x, y, z) (((x) & (y)) | (~(x) & (z)))
#define SET(a, b, c, d, k, s, Ti)\
  t = a + F(b,c,d) + X[k] + Ti;\
  a = ROTATE_LEFT(t, s) + b
    /* Do the following 16 operations. */
    SET(a, b, c, d,  0,  7,  T1);
    SET(d, a, b, c,  1, 12,  T2);
    SET(c, d, a, b,  2, 17,  T3);
    SET(b, c, d, a,  3, 22,  T4);
    SET(a, b, c, d,  4,  7,  T5);
    SET(d, a, b, c,  5, 12,  T6);
    SET(c, d, a, b,  6, 17,  T7);
    SET(b, c, d, a,  7, 22,  T8);
    SET(a, b, c, d,  8,  7,  T9);
    SET(d, a, b, c,  9, 12, T10);
    SET(c, d, a, b, 10, 17, T11);
    SET(b, c, d, a, 11, 22, T12);
    SET(a, b, c, d, 12,  7, T13);
    SET(d, a, b, c, 13, 12, T14);
    SET(c, d, a, b, 14, 17, T15);
    SET(b, c, d, a, 15, 22, T16);
#undef SET

     /* Round 2. */
     /* Let [abcd k s i] denote the operation
          a = b + ((a + G(b,c,d) + X[k] + T[i]) <<< s). */
#define G(x, y, z) (((x) & (z)) | ((y) & ~(z)))
#define SET(a, b, c, d, k, s, Ti)\
  t = a + G(b,c,d) + X[k] + Ti;\
  a = ROTATE_LEFT(t, s) + b
     /* Do the following 16 operations. */
    SET(a, b, c, d,  1,  5, T17);
    SET(d, a, b, c,  6,  9, T18);
    SET(c, d, a, b, 11, 14, T19);
    SET(b, c, d, a,  0, 20, T20);
    SET(a, b, c, d,  5,  5, T21);
    SET(d, a, b, c, 10,  9, T22);
    SET(c, d, a, b, 15, 14, T23);
    SET(b, c, d, a,  4, 20, T24);
    SET(a, b, c, d,  9,  5, T25);
    SET(d, a, b, c, 14,  9, T26);
    SET(c, d, a, b,  3, 14, T27);
    SET(b, c, d, a,  8, 20, T28);
    SET(a, b, c, d, 13,  5, T29);
    SET(d, a, b, c,  2,  9, T30);
    SET(c, d, a, b,  7, 14, T31);
    SET(b, c, d, a, 12, 20, T32);
#undef SET

     /* Round 3. */
     /* Let [abcd k s t] denote the operation
          a = b + ((a + H(b,c,d) + X[k] + T[i]) <<< s). */
#define H(x, y, z) ((x) ^ (y) ^ (z))
#define SET(a, b, c, d, k, s, Ti)\
  t = a + H(b,c,d) + X[k] + Ti;\
  a = ROTATE_LEFT(t, s) + b
     /* Do the following 16 operations. */
    SET(a, b, c, d,  5,  4, T33);
    SET(d, a, b, c,  8, 11, T34);
    SET(c, d, a, b, 11, 16, T35);
    SET(b, c, d, a, 14, 23, T36);
    SET(a, b, c, d,  1,  4, T37);
    SET(d, a, b, c,  4, 11, T38);
    SET(c, d, a, b,  7, 16, T39);
    SET(b, c, d, a, 10, 23, T40);
    SET(a, b, c, d, 13,  4, T41);
    SET(d, a, b, c,  0, 11, T42);
    SET(c, d, a, b,  3, 16, T43);
    SET(b, c, d, a,  6, 23, T44);
    SET(a, b, c, d,  9,  4, T45);
    SET(d, a, b, c, 12, 11, T46);
    SET(c, d, a, b, 15, 16, T47);
    SET(b, c, d, a,  2, 23, T48);
#undef SET

     /* Round 4. */
     /* Let [abcd k s t] denote the operation
          a = b + ((a + I(b,c,d) + X[k] + T[i]) <<< s). */
#define I(x, y, z) ((y) ^ ((x) | ~(z)))
#define SET(a, b, c, d, k, s, Ti)\
  t = a + I(b,c,d) + X[k] + Ti;\
  a = ROTATE_LEFT(t, s) + b
     /* Do the following 16 operations. */
    SET(a, b, c, d,  0,  6, T49);
    SET(d, a, b, c,  7, 10, T50);
    SET(c, d, a, b, 14, 15, T51);
    SET(b, c, d, a,  5, 21, T52);
    SET(a, b, c, d, 12,  6, T53);
    SET(d, a, b, c,  3, 10, T54);
    SET(c, d, a, b, 10, 15, T55);
    SET(b, c, d, a,  1, 21, T56);
    SET(a, b, c, d,  8,  6, T57);
    SET(d, a, b, c, 15, 10, T58);
    SET(c, d, a, b,  6, 15, T59);
    SET(b, c, d, a, 13, 21, T60);
    SET(a, b, c, d,  4,  6, T61);
    SET(d, a, b, c, 11, 10, T62);
    SET(c, d, a, b,  2, 15, T63);
    SET(b, c, d, a,  9, 21, T64);
#undef SET

     /* Then perform the following additions. (That is increment each
        of the four registers by the value it had before this block
        was started.) */
    pms->abcd[0] += a;
    pms->abcd[1] += b;
    pms->abcd[2] += c;
    pms->abcd[3] += d;
}

void
md5_init(md5_state_t *pms)
{
    pms->count[0] = pms->count[1] = 0;
    pms->abcd[0] = 0x67452301;
    pms->abcd[1] = /*0xefcdab89*/ T_MASK ^ 0x10325476;
    pms->abcd[2] = /*0x98badcfe*/ T_MASK ^ 0x67452301;
    pms->abcd[3] = 0x10325476;
}

void
md5_append(md5_state_t *pms, const md5_byte_t *data, int nbytes)
{
    const md5_byte_t *p = data;
    int left = nbytes;
    int offset = (pms->count[0] >> 3) & 63;
    md5_word_t nbits = (md5_word_t)(nbytes << 3);

    if (nbytes <= 0)
	return;

    /* Update the message length. */
    pms->count[1] += nbytes >> 29;
    pms->count[0] += nbits;
    if (pms->count[0] < nbits)
	pms->count[1]++;

    /* Process an initial partial block. */
    if (offset) {
	int copy = (offset + nbytes > 64 ? 64 - offset : nbytes);

	memcpy(pms->buf + offset, p, copy);
	if (offset + copy < 64)
	    return;
	p += copy;
	left -= copy;
	md5_process(pms, pms->buf);
    }

    /* Process full blocks. */
    for (; left >= 64; p += 64, left -= 64)
	md5_process(pms, p);

    /* Process a final partial block. */
    if (left)
	memcpy(pms->buf, p, left);
}

void
md5_finish(md5_state_t *pms, md5_byte_t digest[16])
{
    static const md5_byte_t pad[64] = {
	0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
    };
    md5_byte_t data[8];
    int i;

    /* Save the length before padding. */
    for (i = 0; i < 8; ++i)
	data[i] = (md5_byte_t)(pms->count[i >> 2] >> ((i & 3) << 3));
    /* Pad to 56 bytes mod 64. */
    md5_append(pms, pad, ((55 - (pms->count[0] >> 3)) & 63) + 1);
    /* Append the length. */
    md5_append(pms, data, 8);
    for (i = 0; i < 16; ++i)
	digest[i] = (md5_byte_t)(pms->abcd[i >> 2] >> ((i & 3) << 3));
}



//
// --- PTypes' wrapper class -----------------------------------------------
//


outmd5::outmd5(outstm* istm): outfilter(istm, 0)
{
    memset(&ctx, 0, sizeof ctx);
    memset(digest, 0, sizeof digest);
}


outmd5::~outmd5() 
{
    close();
}


void outmd5::doopen()
{
    outfilter::doopen();
    memset(digest, 0, sizeof digest);
    md5_init(&ctx);
}


void outmd5::doclose()
{
    md5_finish(&ctx, (unsigned char*)digest);
    outfilter::doclose();
}


int outmd5::dorawwrite(const char* buf, int count)
{
    if (count > 0)
    {
        md5_append(&ctx, (const unsigned char*)buf, (unsigned)count);
        if (stm != nil)
            stm->write(buf, count);
        return count;
    }
    else
        return 0;
}


string outmd5::get_streamname()
{
    return "MD5";
}


string outmd5::get_digest()
{
    close();
    string result;
    // the first 120 bits are divided into 24-bit portions;
    // each portion is represented with 4 characters from the base64 set
    for (int i = 0; i <= 12; i += 3)
    {
        long v = (digest[i] << 16) | (digest[i + 1] << 8) | digest[i + 2];
        result += itobase(v, 64, 4);
    }
    // the last byte is complemented with 4 zero bits to form
    // the last two base64 characters
    return result + itobase(digest[15] << 4, 64, 2);
}


PTYPES_END