📄 iphlpapi.h
字号:
/*++
Copyright (c) 1997-2000 Microsoft Corporation
Module Name:
iphlpapi.h
Abstract:
Header file for functions to interact with the IP Stack for MIB-II and
related functionality
--*/
#ifndef __IPHLPAPI_H__
#define __IPHLPAPI_H__
#if _MSC_VER > 1000
#pragma once
#endif
#ifdef __cplusplus
extern "C" {
#endif
//////////////////////////////////////////////////////////////////////////////
// //
// IPRTRMIB.H has the definitions of the strcutures used to set and get //
// information //
// //
//////////////////////////////////////////////////////////////////////////////
#include <iprtrmib.h>
#include "ipexport.h"
#include "iptypes.h"
//////////////////////////////////////////////////////////////////////////////
// //
// The GetXXXTable APIs take a buffer and a size of buffer. If the buffer //
// is not large enough, the APIs return ERROR_INSUFFICIENT_BUFFER and //
// *pdwSize is the required buffer size //
// The bOrder is a BOOLEAN, which if TRUE sorts the table according to //
// MIB-II (RFC XXXX) //
// //
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
// //
// Retrieves the number of interfaces in the system. These include LAN and //
// WAN interfaces //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD
WINAPI
GetNumberOfInterfaces(
OUT PDWORD pdwNumIf
);
//////////////////////////////////////////////////////////////////////////////
// //
// Gets the MIB-II ifEntry //
// The dwIndex field of the MIB_IFROW should be set to the index of the //
// interface being queried //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI GetIfEntry(IN OUT PMIB_IFROW pIfRow);
//////////////////////////////////////////////////////////////////////////////
// //
// Gets the MIB-II IfTable //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI GetIfTable(
OUT PMIB_IFTABLE pIfTable,
IN OUT PULONG pdwSize,
IN BOOL bOrder
);
//////////////////////////////////////////////////////////////////////////////
// //
// Gets the Interface to IP Address mapping //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI GetIpAddrTable(
OUT PMIB_IPADDRTABLE pIpAddrTable,
IN OUT PULONG pdwSize,
IN BOOL bOrder
);
//////////////////////////////////////////////////////////////////////////////
// //
// Gets the current IP Address to Physical Address (ARP) mapping //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI GetIpNetTable(
OUT PMIB_IPNETTABLE pIpNetTable,
IN OUT PULONG pdwSize,
IN BOOL bOrder
);
//////////////////////////////////////////////////////////////////////////////
// //
// Gets the IP Routing Table (RFX XXXX) //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI GetIpForwardTable(
OUT PMIB_IPFORWARDTABLE pIpForwardTable,
IN OUT PULONG pdwSize,
IN BOOL bOrder
);
//////////////////////////////////////////////////////////////////////////////
// //
// Gets TCP Connection/UDP Listener Table //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI GetTcpTable(
OUT PMIB_TCPTABLE pTcpTable,
IN OUT PDWORD pdwSize,
IN BOOL bOrder
);
DWORD WINAPI GetUdpTable(
OUT PMIB_UDPTABLE pUdpTable,
IN OUT PDWORD pdwSize,
IN BOOL bOrder
);
//////////////////////////////////////////////////////////////////////////////
// //
// Gets IP/ICMP/TCP/UDP Statistics //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI GetIpStatistics( OUT PMIB_IPSTATS pStats );
DWORD WINAPI GetIcmpStatistics(OUT PMIB_ICMP pStats );
DWORD WINAPI GetTcpStatistics(OUT PMIB_TCPSTATS pStats );
DWORD WINAPI GetUdpStatistics(OUT PMIB_UDPSTATS pStats );
//////////////////////////////////////////////////////////////////////////////
// //
// Used to set the ifAdminStatus on an interface. The only fields of the //
// MIB_IFROW that are relevant are the dwIndex (index of the interface //
// whose status needs to be set) and the dwAdminStatus which can be either //
// MIB_IF_ADMIN_STATUS_UP or MIB_IF_ADMIN_STATUS_DOWN //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI SetIfEntry(IN PMIB_IFROW pIfRow );
//////////////////////////////////////////////////////////////////////////////
// //
// Used to create, modify or delete a route. In all cases the //
// dwForwardIfIndex, dwForwardDest, dwForwardMask, dwForwardNextHop and //
// dwForwardPolicy MUST BE SPECIFIED. Currently dwForwardPolicy is unused //
// and MUST BE 0. //
// For a set, the complete MIB_IPFORWARDROW structure must be specified //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI CreateIpForwardEntry(IN PMIB_IPFORWARDROW pRoute );
DWORD WINAPI SetIpForwardEntry(IN PMIB_IPFORWARDROW pRoute );
DWORD WINAPI DeleteIpForwardEntry(IN PMIB_IPFORWARDROW pRoute );
//////////////////////////////////////////////////////////////////////////////
// //
// Used to set the ipForwarding to ON or OFF (currently only ON->OFF is //
// allowed) and to set the defaultTTL. If only one of the fields needs to //
// be modified and the other needs to be the same as before the other field //
// needs to be set to MIB_USE_CURRENT_TTL or MIB_USE_CURRENT_FORWARDING as //
// the case may be //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI SetIpStatistics( IN PMIB_IPSTATS pIpStats );
//////////////////////////////////////////////////////////////////////////////
// //
// Used to set the defaultTTL. //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI SetIpTTL( UINT nTTL);
//////////////////////////////////////////////////////////////////////////////
// //
// Used to create, modify or delete an ARP entry. In all cases the dwIndex //
// dwAddr field MUST BE SPECIFIED. //
// For a set, the complete MIB_IPNETROW structure must be specified //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI CreateIpNetEntry(IN PMIB_IPNETROW pArpEntry );
DWORD WINAPI SetIpNetEntry(IN PMIB_IPNETROW pArpEntry );
DWORD WINAPI DeleteIpNetEntry( IN PMIB_IPNETROW pArpEntry );
DWORD WINAPI FlushIpNetTable(IN DWORD dwIfIndex);
//////////////////////////////////////////////////////////////////////////////
// //
// Used to create or delete a Proxy ARP entry. The dwIndex is the index of //
// the interface on which to PARP for the dwAddress. If the interface is //
// of a type that doesnt support ARP, e.g. PPP, then the call will fail //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI CreateProxyArpEntry(
IN DWORD dwAddress,
IN DWORD dwMask,
IN DWORD dwIfIndex
);
DWORD WINAPI DeleteProxyArpEntry(
IN DWORD dwAddress,
IN DWORD dwMask,
IN DWORD dwIfIndex
);
//////////////////////////////////////////////////////////////////////////////
// //
// Used to set the state of a TCP Connection. The only state that it can be //
// set to is MIB_TCP_STATE_DELETE_TCB. The complete MIB_TCPROW structure //
// MUST BE SPECIFIED //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI SetTcpEntry(IN PMIB_TCPROW pTcpRow );
DWORD WINAPI GetInterfaceInfo(
IN PIP_INTERFACE_INFO pIfTable,
OUT PULONG dwOutBufLen
);
DWORD WINAPI GetUniDirectionalAdapterInfo(
OUT PIP_UNIDIRECTIONAL_ADAPTER_ADDRESS pIPIfInfo,
OUT PULONG dwOutBufLen
);
//////////////////////////////////////////////////////////////////////////////
// //
// Gets the "best" outgoing interface for the specified destination address //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI GetBestInterface(
IN IPAddr dwDestAddr,
OUT PDWORD pdwBestIfIndex
);
//////////////////////////////////////////////////////////////////////////////
// //
// Gets the best (longest matching prefix) route for the given destination //
// If the source address is also specified (i.e. is not 0x00000000), and //
// there are multiple "best" routes to the given destination, the returned //
// route will be one that goes out over the interface which has an address //
// that matches the source address //
// //
//////////////////////////////////////////////////////////////////////////////
DWORD WINAPI GetBestRoute(
IN DWORD dwDestAddr,
IN DWORD dwSourceAddr, OPTIONAL
OUT PMIB_IPFORWARDROW pBestRoute
);
DWORD WINAPI NotifyAddrChange(
OUT PHANDLE Handle,
IN LPOVERLAPPED overlapped
);
DWORD WINAPI NotifyRouteChange(
OUT PHANDLE Handle,
IN LPOVERLAPPED overlapped
);
DWORD WINAPI GetAdapterIndex(
IN LPWSTR AdapterName,
OUT PULONG IfIndex
);
DWORD WINAPI AddIPAddress(
IPAddr Address,
IPMask IpMask,
DWORD IfIndex,
PULONG NTEContext,
PULONG NTEInstance
);
DWORD WINAPI DeleteIPAddress(ULONG NTEContext);
DWORD WINAPI GetNetworkParams(PFIXED_INFO pFixedInfo, PULONG pOutBufLen );
DWORD WINAPI GetAdaptersInfo(PIP_ADAPTER_INFO pAdapterInfo, PULONG pOutBufLen );
#ifdef _WINSOCK2API_
//
// The following functions require Winsock2.
//
DWORD WINAPI GetAdaptersAddresses(PIP_ADAPTER_ADDRESSES pAdapterAddresses, PULONG pOutBufLen );
#endif
DWORD WINAPI GetPerAdapterInfo( ULONG IfIndex, PIP_PER_ADAPTER_INFO pPerAdapterInfo, PULONG pOutBufLen );
DWORD WINAPI IpReleaseAddress(PIP_ADAPTER_INDEX_MAP AdapterInfo);
DWORD WINAPI IpRenewAddress(PIP_ADAPTER_INDEX_MAP AdapterInfo );
DWORD WINAPI SendARP(
IPAddr DestIP,
IPAddr SrcIP,
PULONG pMacAddr,
PULONG PhyAddrLen
);
BOOL WINAPI GetRTTAndHopCount(
IPAddr DestIpAddress,
PULONG HopCount,
ULONG MaxHops,
PULONG RTT
);
DWORD WINAPI GetFriendlyIfIndex( DWORD IfIndex );
DWORD WINAPI EnableRouter(HANDLE* pHandle, OVERLAPPED* pOverlapped );
DWORD WINAPI UnenableRouter(
OVERLAPPED* pOverlapped,
LPDWORD lpdwEnableCount OPTIONAL
);
DWORD WINAPI DisableMediaSense(
HANDLE *pHandle,
OVERLAPPED *pOverLapped
);
DWORD WINAPI RestoreMediaSense(
OVERLAPPED* pOverlapped,
LPDWORD lpdwEnableCount OPTIONAL
);
#ifdef __cplusplus
}
#endif
#endif //__IPHLPAPI_H__
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -