itrafmon.html

一个网络流量分析的完整的程序

><DD
><P
>     The connection is done sending data in this direction, and has sent a FIN (finished) packet, but has not yet been acknowledged by the other host.</P
></DD
><DT
><TT
CLASS="COMPUTEROUTPUT"
>CLOSED</TT
></DT
><DD
><P
>     The FIN has been acknowledged by the other host. When both directions of a connection are marked CLOSED, the entries they occupy become available for new connection entries.</P
></DD
><DT
><TT
CLASS="COMPUTEROUTPUT"
>-</TT
></DT
><DD
><P
>     The flag is not set</P
></DD
></DL
></DIV
></P
></DD
></DL
></DIV
><P
>  Some other pieces of information can be viewed as well. The M key
  displays more TCP information. Pressing M once
  displays the MAC addresses of the LAN hosts
  that delivered the packets (if the <I
CLASS="EMPHASIS"
>Source MAC addrs in traffic
monitor</I
>
  option is enabled in the <I
CLASS="EMPHASIS"
><A
HREF="config.html"
>Configure...</A
></I
>
menu). <TT
CLASS="COMPUTEROUTPUT"
>N/A</TT
> is displayed if
  no packets have been received from the source yet, or if the interface
  doesn't support MAC addresses (such as PPP interfaces).</P
><P
>  If the <I
CLASS="EMPHASIS"
>Source MAC addrs in traffic monitor</I
> option is not enabled,
  pressing M simply toggles between the counts and the packet and window
  sizes.</P
><P
>  By default, only IP addresses are displayed, but if you have access to a
  name server or host table, you may enable reverse lookup for the
  IP addresses. Just enable reverse lookup
in the <I
CLASS="EMPHASIS"
><A
HREF="config.html"
>Configure...</A
></I
> menu.</P
><TABLE
CLASS="SIDEBAR"
BORDER="1"
CELLPADDING="5"
><TR
><TD
><DIV
CLASS="SIDEBAR"
><A
NAME="AEN679"
></A
><P
><B
>The rvnamed Process</B
></P
><P
>  The IP traffic monitor starts a daemon called
  <B
CLASS="COMMAND"
>rvnamed</B
> to help speed
  up reverse lookups without sacrificing too much keyboard control and
  accuracy of the counts. While reverse lookup is being conducted in the
  background, IP addresses will be used until the resolution is complete.</P
><P
>  If for some reason <B
CLASS="COMMAND"
>rvnamed</B
> cannot start (probably due to
  improper installation or lack of memory), and you are
  on the Internet, and you enable reverse lookup, your
  keyboard control can become very slow. This is because the standard
  lookup functions do not return until they have completed their
  tasks, and it can take several seconds for a name resolution
  in the foreground to complete.</P
><P
>  <B
CLASS="COMMAND"
>rvnamed</B
> will spawn up to 200 children to process reverse DNS queries.</P
></DIV
></TD
></TR
></TABLE
><DIV
CLASS="TIP"
><P
></P
><TABLE
CLASS="TIP"
WIDTH="100%"
BORDER="0"
><TR
><TD
WIDTH="25"
ALIGN="CENTER"
VALIGN="TOP"
><IMG
SRC="./stylesheet-images/tip.gif"
HSPACE="5"
ALT="Tip"></TD
><TH
ALIGN="LEFT"
VALIGN="CENTER"
><B
>Tip</B
></TH
></TR
><TR
><TD
>&nbsp;</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
><P
>If you notice unusual SYN activity (too many
initial (<TT
CLASS="COMPUTEROUTPUT"
>S---</TT
>) but frozen SYN entries, or rapidly
increasing initial SYN packets for a single connection), you may
be under a SYN flooding attack or TCP port scan. Apply appropriate measures, or the
targeted machines may begin denying network services.</P
></TD
></TR
></TABLE
></DIV
><P
>  Entries not updated within a user-configurable amount of
  time may get replaced with new connections. The default time is 15
  minutes. This is regardless of whether the connection is closed or
  not. (Some unclosed connections may be due to extremely slow links
  or crashes at either end of the connection.) This figure can be changed
  at the <I
CLASS="EMPHASIS"
><A
HREF="config.html"
>Configure...</A
></I
> menu.</P
><P
>  Some early entries may have a &#62; symbol in front of its packet
  count. This means the connection was already established
  when the monitor started. In other words, the figures indicated do not
  reflect the counts since the start
  of the TCP connection, but rather, since the start of the traffic
  monitor. Eventually, these &#62; entries will close (or time out) and
  disappear. TCP entries without the &#62;
  were initiated after the traffic monitor started, and the counts
  indicate the totals of the connection itself.  Just consider entries
  with &#62; partial.</P
><P
>  Some &#62; entries may go idle if the traffic monitor was started
  when these connections were already half-closed (FIN sent
  by one host, but data still being sent by the other). This
  is because the traffic monitor cannot determine if a
  connection was already half-closed when it started. These entries will
  eventually time out. (To minimize these entries, an entry is not added
  by the monitor until a packet with data or a SYN packet is received.)</P
><P
>  Direction entries also become available for reuse if an ICMP Destination
  Unreachable message is received for the connection.</P
><P
>  The lower part of the screen contains a summary line showing the IP,
  TCP, UDP, ICMP, and non-IP byte counts since the start of the
  monitor. The IP, TCP, UDP, and ICMP counts include only the IP
  datagram header and data, not the data-link headers. The
  non-IP count includes the data-link headers.</P
><DIV
CLASS="NOTE"
><P
></P
><TABLE
CLASS="NOTE"
WIDTH="100%"
BORDER="0"
><TR
><TD
WIDTH="25"
ALIGN="CENTER"
VALIGN="TOP"
><IMG
SRC="./stylesheet-images/note.gif"
HSPACE="5"
ALT="Note"></TD
><TH
ALIGN="LEFT"
VALIGN="CENTER"
><B
>Technical note: IP Forwarding and Masquerading</B
></TH
></TR
><TR
><TD
>&nbsp;</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
><P
>  Previous versions of IPTraf issued a warning if the kernel had
  IP masquerading enabled due to the way the
  kernel masqueraded and translated the IP addresses. The new kernels no
  longer do it as before and IPTraf now gives output properly on
  masquerading machines. The <TT
CLASS="COMPUTEROUTPUT"
>-q</TT
> parameter is no
  longer required to suppress the warning screen.</P
><P
>  On forwarding (non-masquerading)
  machines packets and TCP connections simply appear twice, one
  each for the incoming and outgoing interfaces if all interafaces
  are being monitored.</P
><P
>  On masquerading machines, packets and connections from the
  internal network to the external network also appear
  twice, one for the internal and external interface. Packets coming
  from the internal network will be indicated as coming from the internal
  IP address that sourced them, and also as coming from the IP address
  of the external interface on your masquerading machine. In much the same
  way, packets coming in from the external network will look
  like they're destined for the external interface's IP address, and again
  as destined for the final host on the internal network.</P
></TD
></TR
></TABLE
></DIV
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN704"
>Closed/Idle/Timed Out Connections</A
></H2
><P
>  A TCP connection entry that closes, gets reset, or stays idle too long
  normally get replaced with new connections. However,
  if these get too many, active connections may become
  interspersed among closed, reset, or idle entries.</P
><P
>  IPTraf can be set to automatically remove all closed, reset, and
  idle entries with the <I
CLASS="EMPHASIS"
>TCP closed/idle
  persistence...</I
> configuration option. You can also press the F key to
  immediately clear them at any time.</P
><DIV
CLASS="NOTE"
><P
></P
><TABLE
CLASS="NOTE"
WIDTH="100%"
BORDER="0"
><TR
><TD
WIDTH="25"
ALIGN="CENTER"
VALIGN="TOP"
><IMG
SRC="./stylesheet-images/note.gif"
HSPACE="5"
ALT="Note"></TD
><TH
ALIGN="LEFT"
VALIGN="CENTER"
><B
>Note</B
></TH
></TR
><TR
><TD
>&nbsp;</TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
><P
>The TCP timeout... option only tells
IPTraf how long it should take before a connection should be considered
idle and open to replacement by new connections. This
does not determine how long it remains on-screen. The <I
CLASS="EMPHASIS"
>TCP closed/idle
persistence...</I
> parameter flushes entries that have been idle for the
number of minutes defined by the <I
CLASS="EMPHASIS"
>TCP timeout...</I
> option.</P
></TD
></TR
></TABLE
></DIV
></DIV
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN714"
>Sorting TCP Entries</A
></H2
><P
>  The TCP connection entries can be sorted by pressing the S key, then
  by selecting a sort criterion. Pressing S will display a box showing the
  available sort criteria. Press P to sort by packet count, B to sort by
  byte count. Pressing any other key will cancel the sort.</P
><P
>  The sort operation compares the larger values in each connection entry
  pair and sorts the counts in descending order.</P
><P
>  Over time, the entries will go out of order as counts proceed at varying
  rates. Sorting is not done automatically so as not to degrade performance.</P
><DIV
CLASS="FIGURE"
><A
NAME="AEN719"
></A
><P
><IMG
SRC="iptraf-iptmsort.png"></P
><P
><B
>Figure 2. The IP traffic monitor sort criteria</B
></P
></DIV
></DIV
></DIV
></DIV
><DIV
CLASS="NAVFOOTER"
><HR
ALIGN="LEFT"
WIDTH="100%"><TABLE
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
><A
HREF="ifaces.html"
>&#60;&#60;&#60; Previous</A
></TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="manual.html"
>Home</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
><A
HREF="lowerwin.html"
>Next &#62;&#62;&#62;</A
></TD
></TR
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
>Supported Network Interfaces</TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
>&nbsp;</TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
>Lower Window</TD
></TR
></TABLE
></DIV
></BODY
></HTML
>