rprintf.h

ATMEL的AVR单片机库文件

/*! \file rprintf.h \brief printf routine and associated routines. */
//****************************************************************************
//
// File Name	: 'rprintf.h'
// Title		: printf routine and associated routines
// Author		: Pascal Stang - Copyright (C) 2000-2002
// Created		: 2000.12.26
// Revised		: 2003.5.1
// Version		: 1.0
// Target MCU	: Atmel AVR series and other targets
// Editor Tabs	: 4
//
// NOTE: This code is currently below version 1.0, and therefore is considered
// to be lacking in some functionality or documentation, or may not be fully
// tested.  Nonetheless, you can expect most functions to work.
//
// This code is distributed under the GNU Public License
//		which can be found at http://www.gnu.org/licenses/gpl.txt
//
//****************************************************************************

#ifndef RPRINTF_H
#define RPRINTF_H

// needed for use of PSTR below
#include <avr/pgmspace.h>

// include configuration
#include "rprintfconf.h"

// defines/constants
#define STRING_IN_RAM	0
#define STRING_IN_ROM	1

// make a putchar for those that are used to using it
//#define putchar(c)	rprintfChar(c);

// functions

//! initializes the rprintf library for an output stream
// you must call this initializer once before using any other rprintf function
// the argument must be a single-character stream output function
void rprintfInit(void (*putchar_func)(unsigned char c));

//! prints a single character to the current output device
void rprintfChar(unsigned char c);

//! prints a null-terminated string stored in RAM
void rprintfStr(char str[]);

//! prints a section of a string stored in RAM
// begins printing at position indicated by <start>
// prints number of characters indicated by <len>
void rprintfStrLen(char str[], unsigned int start, unsigned int len);

//! prints a string stored in program rom
// NOTE: this function does not actually store your string in
// program rom, but merely reads it assuming you stored it properly.
void rprintfProgStr(const prog_char str[]);
// Using the function rprintfProgStrM(...) automatically causes 
// your string to be stored in ROM, thereby not wasting precious RAM
// Example usage:
// rprintfProgStrM("Hello, this string is stored in program rom");
#define rprintfProgStrM(string)			(rprintfProgStr(PSTR(string)))

//! prints a carriage return and line feed
// useful when printing to serial ports/terminals
void rprintfCRLF(void);

// prints the number contained in "data" in hex format
// u04,u08,u16,and u32 functions handle 4,8,16,or 32 bits respectively
void rprintfu04(unsigned char data);	///< print 4-bit hex number
void rprintfu08(unsigned char data);	///< print 8-bit hex number
void rprintfu16(unsigned short data);	///< print 16-bit hex number
void rprintfu32(unsigned long data);	///< print 32-bit hex number

//! a flexible integer number printing routine
void rprintfNum(char base, char numDigits, char isSigned, char padchar, long n);

#ifdef RPRINTF_FLOAT
	//! floating-point print routine
	void rprintfFloat(char numDigits, double x);
#endif

// NOTE: Below you'll see the function prototypes of rprintf1RamRom and 
// rprintf2RamRom.  rprintf1RamRom and rprintf2RamRom are both reduced versions
// of the regular C printf() command.  However, they are modified to be able
// to read their text/format strings from RAM or ROM in the Atmel microprocessors.
// Unless you really intend to, do not use the "RamRom" versions of the functions
// directly.  Instead use the #defined function versions:
//
// printfx("text/format",args)    ...to keep your text/format string stored in RAM
//		- or -
// printfxROM("text/format",args) ...to keep your text/format string stored in ROM
//
// where x is either 1 or 2 for the simple or more powerful version of printf()
//
// Since there is much more ROM than RAM available in the Atmel microprocessors,
// and nearly all text/format strings are constant (never change in the course
// of the program), you should try to use the ROM printf version exclusively.
// This will ensure you leave as much RAM as possible for program variables and
// data.

#ifdef RPRINTF_SIMPLE
	// a simple printf routine
	int rprintf1RamRom(unsigned char stringInRom, const char *format, ...);
	// #defines for RAM or ROM operation
	#define rprintf1(format, args...)  		rprintf1RamRom(STRING_IN_ROM, PSTR(format), ## args)
	#define rprintf1RAM(format, args...)	rprintf1RamRom(STRING_IN_RAM, format, ## args)

	// *** Default rprintf(...) ***
	// this next line determines what the the basic rprintf() defaults to:
	#define rprintf(format, args...)  		rprintf1RamRom(STRING_IN_ROM, PSTR(format), ## args)
#endif

#ifdef RPRINTF_COMPLEX
	// a more powerful printf routine
	int rprintf2RamRom(unsigned char stringInRom, const char *sfmt, ...);
	// #defines for RAM or ROM operation
	#define rprintf2(format, args...)		rprintf2RamRom(STRING_IN_ROM, format, ## args)
	#define rprintf2RAM(format, args...)	rprintf2RamRom(STRING_IN_RAM, format, ## args)

	// *** Default rprintf(...) ***
	// this next line determines what the the basic rprintf() defaults to:
	#define rprintf(format, args...)  		rprintf2RamRom(STRING_IN_ROM, PSTR(format), ## args)
#endif

#endif