rprintftest.c

ATMEL的AVR单片机库文件

//*****************************************************************************
// File Name	: rprintftest.c
// 
// Title		: example usage of rprintf library functions
// Revision		: 1.0
// Notes		:	
// Target MCU	: Atmel AVR series
// Editor Tabs	: 4
// 
// Revision History:
// When			Who			Description of change
// -----------	-----------	-----------------------
// 10-Sep-2002	pstang		Created the program
//*****************************************************************************

 
//----- Include Files ---------------------------------------------------------
#include <avr/io.h>		// include I/O definitions (port names, pin names, etc)
#include <avr/signal.h>	// include "signal" names (interrupt names)
#include <avr/interrupt.h>	// include interrupt support

#include "global.h"		// include our global settings
#include "uart.h"		// include uart function library
#include "rprintf.h"	// include printf function library
#include "timer.h"		// include timer function library (timing, PWM, etc)
#include "vt100.h"		// include VT100 terminal support

void rprintfTest(void);

//----- Begin Code ------------------------------------------------------------
int main(void)
{
	// initialize our libraries
	// initialize the UART (serial port)
	uartInit();
	// set the baud rate of the UART for our debug/reporting output
	uartSetBaudRate(9600);
	// initialize the timer system
	timerInit();

	// initialize rprintf system
	// - use uartSendByte as the output for all rprintf statements
	//   this will cause all rprintf library functions to direct their
	//   output to the uart
	// - rprintf can be made to output to any device which takes characters.
	//   You must write a function which takes an unsigned char as an argument
	//   and then pass this to rprintfInit like this: rprintfInit(YOUR_FUNCTION);
	rprintfInit(uartSendByte);

	// initialize vt100 library
	vt100Init();
	
	// clear the terminal screen
	vt100ClearScreen();
	
	// run the test
	rprintfTest();

	return 0;
}

void rprintfTest(void)
{
	u16 val;
	u08 mydata;
	u08 mystring[10];
	float b;
	u08 small;
	u16 medium;
	u32 big;

	// print a little intro message so we know things are working
	rprintf("\r\nThis is my cool program!\r\n");

	
	rprintf("\r\nWelcome to rprintf Test!\r\n");

	// print single characters
	rprintfChar('H');
	rprintfChar('e');
	rprintfChar('l');
	rprintfChar('l');
	rprintfChar('o');
	// print a constant string stored in FLASH
	rprintfProgStrM(" World!");
	// print a carriage return, line feed combination
	rprintfCRLF();
	// note that using rprintfCRLF() is more memory-efficient than
	// using rprintf("\r\n"), especially if you do it repeatedly

	mystring[0] = 'A';
	mystring[1] = ' ';
	mystring[2] = 'S';
	mystring[3] = 't';
	mystring[4] = 'r';
	mystring[5] = 'i';
	mystring[6] = 'n';
	mystring[7] = 'g';
	mystring[8] = '!';
	mystring[9] = 0;	// null termination

	// print a null-terminated string from RAM
	rprintfStr(mystring);
	rprintfCRLF();

	// print a section of a string from RAM
	// - start at index 2
	// - print 6 characters
	rprintfStrLen(mystring, 2, 6);
	rprintfCRLF();


	val = 24060;
	mydata = 'L';

	// print a decimal number
	rprintf("This is a decimal number: %d\r\n", val);

	// print a hex number
	rprintf("This is a hex number: %x\r\n", mydata);
	
	// print a character
	rprintf("This is a character: %c\r\n", mydata);

	// print hex numbers
	small = 0x12;		// a char
	medium = 0x1234;	// a short
	big = 0x12345678;	// a long

	rprintf("This is a 2-digit hex number (char) : ");
	rprintfu08(small);
	rprintfCRLF();

	rprintf("This is a 4-digit hex number (short): ");
	rprintfu16(medium);
	rprintfCRLF();

	rprintf("This is a 8-digit hex number (long) : ");
	rprintfu32(big);
	rprintfCRLF();

	// print a formatted decimal number
	// - use base 10
	// - use 8 characters
	// - the number is signed [TRUE]
	// - pad with '.' periods
	rprintf("This is a formatted decimal number: ");
	rprintfNum(10, 8, TRUE, '.', val);
	rprintfCRLF();

	b = 1.23456;

	// print a floating point number
	// use 10-digit precision
	
	// NOTE: TO USE rprintfFloat() YOU MUST ENABLE SUPPORT IN rprintfconf.h

	//rprintf("This is a floating point number: ");
	//rprintfFloat(8, b);
	//rprintfCRLF();
}