kchap9.c

usb 的固件编程序源码

#include <stdio.h>
#include <string.h>

//#include <reg51.h>                /* special function register declarations   */

#include "khal.h"
#include "kd12ci.h"
#include "kmain.h"
#include "kUSB100.h"
#include "kchap9.h"

//---------------------------
extern void single_transmit(unsigned char * buf, unsigned char len);
extern void code_transmit(unsigned char code * pRomData, unsigned short len);
extern void stall_ep0(void);
extern void init_unconfig(void);
extern void init_config(void);

#define NUM_ENDPOINTS	4

#define CONFIG_DESCRIPTOR_LENGTH    sizeof(USB_CONFIGURATION_DESCRIPTOR) \
									+ sizeof(USB_INTERFACE_DESCRIPTOR) \
									+ (NUM_ENDPOINTS * sizeof(USB_ENDPOINT_DESCRIPTOR))

extern CONTROL_XFER ControlData;
extern IO_REQUEST idata ioRequest;
extern EPPFLAGS bEPPflags;

code USB_DEVICE_DESCRIPTOR DeviceDescr =
{
	sizeof(USB_DEVICE_DESCRIPTOR),
    USB_DEVICE_DESCRIPTOR_TYPE,
    SWAP(0x0100),
    USB_CLASS_CODE_TEST_CLASS_DEVICE,
    0, 
    0,
	EP0_PACKET_SIZE,
	SWAP(0x0471),	//VID
	SWAP(0x0666),	//PID
	SWAP(0x0100),
    0, 			//Manufactory
    0,			//Product
    0,			//Serial Number
    25			//Number of possible configurations
};

code USB_CONFIGURATION_DESCRIPTOR ConfigDescr =
{
    sizeof(USB_CONFIGURATION_DESCRIPTOR),
    USB_CONFIGURATION_DESCRIPTOR_TYPE,
    SWAP(CONFIG_DESCRIPTOR_LENGTH),
	1,
	1,
    0,
	0x60,
	0xf0
	//0x1
};

code USB_INTERFACE_DESCRIPTOR InterfaceDescr =
{
    sizeof(USB_INTERFACE_DESCRIPTOR),
    USB_INTERFACE_DESCRIPTOR_TYPE,
    0,
    0,
	NUM_ENDPOINTS,
	USB_CLASS_CODE_TEST_CLASS_DEVICE,
	USB_SUBCLASS_CODE_TEST_CLASS_D12,
	USB_PROTOCOL_CODE_TEST_CLASS_D12,
	0
};

code USB_ENDPOINT_DESCRIPTOR EP1_TXDescr =
{
	sizeof(USB_ENDPOINT_DESCRIPTOR),
	USB_ENDPOINT_DESCRIPTOR_TYPE,
	0x81,
	USB_ENDPOINT_TYPE_INTERRUPT,
	SWAP(EP1_PACKET_SIZE),
	10
};

code USB_ENDPOINT_DESCRIPTOR EP1_RXDescr =
{
	sizeof(USB_ENDPOINT_DESCRIPTOR),
	USB_ENDPOINT_DESCRIPTOR_TYPE,
	0x1,
	USB_ENDPOINT_TYPE_INTERRUPT,
	SWAP(EP1_PACKET_SIZE),
	10
};

code USB_ENDPOINT_DESCRIPTOR EP2_TXDescr =
{
	sizeof(USB_ENDPOINT_DESCRIPTOR),
	USB_ENDPOINT_DESCRIPTOR_TYPE,
	0x82,
	USB_ENDPOINT_TYPE_BULK,
	SWAP(EP2_PACKET_SIZE),
	10
};

code USB_ENDPOINT_DESCRIPTOR EP2_RXDescr =
{
	sizeof(USB_ENDPOINT_DESCRIPTOR),
	USB_ENDPOINT_DESCRIPTOR_TYPE,
	0x2,
	USB_ENDPOINT_TYPE_BULK,
	SWAP(EP2_PACKET_SIZE),
	10
};

/*
   //*************************************************************************
   // USB Protocol Layer
   //*************************************************************************
*/

void reserved(void)
{
	stall_ep0();
}

/*
   //*************************************************************************
   // USB standard device requests
   //*************************************************************************
*/

void get_status(void)
{
	unsigned char endp, txdat[2];
	unsigned char bRecipient = ControlData.DeviceRequest.bmRequestType & USB_RECIPIENT;
	unsigned char c;

	if (bRecipient == USB_RECIPIENT_DEVICE) {
		if(bEPPflags.bits.remote_wakeup == 1)
			txdat[0] = 3;
		else
			txdat[0] = 1;
		txdat[1]=0;
		single_transmit(txdat, 2);
	} else if (bRecipient == USB_RECIPIENT_INTERFACE) {
		txdat[0]=0;
		txdat[1]=0;
		single_transmit(txdat, 2);
	} else if (bRecipient == USB_RECIPIENT_ENDPOINT) {
		endp = (unsigned char)(ControlData.DeviceRequest.wIndex & MAX_ENDPOINTS);
		if (ControlData.DeviceRequest.wIndex & (unsigned char)USB_ENDPOINT_DIRECTION_MASK)
			c = D12_SelectEndpoint(endp*2 + 1);	/* Control-in */


		else
			c = D12_SelectEndpoint(endp*2);	/* Control-out */
		if(c & D12_STALL)
			txdat[0] = 1;
		else
			txdat[0] = 0;
		txdat[1] = 0;
		single_transmit(txdat, 2);
	} else
		stall_ep0();
}

void clear_feature(void)
{
	unsigned char endp;
	unsigned char bRecipient = ControlData.DeviceRequest.bmRequestType & USB_RECIPIENT;

	if (bRecipient == USB_RECIPIENT_DEVICE
		&& ControlData.DeviceRequest.wValue == USB_FEATURE_REMOTE_WAKEUP) {
		DISABLE;
		bEPPflags.bits.remote_wakeup = 0;
		ENABLE;
		single_transmit(0, 0);
	}
	else if (bRecipient == USB_RECIPIENT_ENDPOINT
		&& ControlData.DeviceRequest.wValue == USB_FEATURE_ENDPOINT_STALL) {
		endp = (unsigned char)(ControlData.DeviceRequest.wIndex & MAX_ENDPOINTS);
		if (ControlData.DeviceRequest.wIndex & (unsigned char)USB_ENDPOINT_DIRECTION_MASK)
			// clear TX stall for IN on EPn. 
			D12_SetEndpointStatus(endp*2 + 1, 0);
		else
			// clear RX stall for OUT on EPn. 
			D12_SetEndpointStatus(endp*2, 0);
		single_transmit(0, 0);
	} else
		stall_ep0();
}

void set_feature(void)
{
	unsigned char endp;
	unsigned char bRecipient = ControlData.DeviceRequest.bmRequestType & USB_RECIPIENT;

	if (bRecipient == USB_RECIPIENT_DEVICE
		&& ControlData.DeviceRequest.wValue == USB_FEATURE_REMOTE_WAKEUP) {
		DISABLE;
		bEPPflags.bits.remote_wakeup = 1;
		ENABLE;
		single_transmit(0, 0);
	}
	else if (bRecipient == USB_RECIPIENT_ENDPOINT
		&& ControlData.DeviceRequest.wValue == USB_FEATURE_ENDPOINT_STALL) {
		endp = (unsigned char)(ControlData.DeviceRequest.wIndex & MAX_ENDPOINTS);
		if (ControlData.DeviceRequest.wIndex & (unsigned char)USB_ENDPOINT_DIRECTION_MASK)
			// clear TX stall for IN on EPn. 
			D12_SetEndpointStatus(endp*2 + 1, 1);
		else
			// clear RX stall for OUT on EPn. 
			D12_SetEndpointStatus(endp*2, 1);
		single_transmit(0, 0);
	} else
		stall_ep0();
}

void set_address(void)
{
	D12_SetAddressEnable((unsigned char)(ControlData.DeviceRequest.wValue &
		DEVICE_ADDRESS_MASK), 1);
	single_transmit(0, 0);
}

void get_descriptor(void)
{
	unsigned char bDescriptor = MSB(ControlData.DeviceRequest.wValue);

	if (bDescriptor == USB_DEVICE_DESCRIPTOR_TYPE) {
		code_transmit((unsigned char code *)&DeviceDescr, sizeof(USB_DEVICE_DESCRIPTOR));
	} 
	else if (bDescriptor == USB_CONFIGURATION_DESCRIPTOR_TYPE) {
		code_transmit((unsigned char code *)&ConfigDescr, CONFIG_DESCRIPTOR_LENGTH);
	} 
	else
		stall_ep0();
}

void get_configuration(void)
{
	unsigned char c = bEPPflags.bits.configuration;

	single_transmit(&c, 1);
}

void set_configuration(void)
{
	if (ControlData.DeviceRequest.wValue == 0) {
		//* put device in unconfigured state 
		single_transmit(0, 0);
		DISABLE;
		bEPPflags.bits.configuration = 0;
		ENABLE;
		init_unconfig();
	} else if (ControlData.DeviceRequest.wValue == 1) {
		// Configure device 
		single_transmit(0, 0);

		init_unconfig();
		init_config();
		
		DISABLE;
		bEPPflags.bits.configuration = 1;
		ENABLE;
	} else
		stall_ep0();
}

void get_interface(void)
{
	unsigned char txdat = 0;        // Only/Current interface = 0 
	single_transmit(&txdat, 1);
}

void set_interface(void)
{
	if (ControlData.DeviceRequest.wValue == 0 && ControlData.DeviceRequest.wIndex == 0)
		single_transmit(0, 0);
	else
		stall_ep0();
}