⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 tuner.c

📁 saa7134-0.2.9.tar.gz 电视卡驱动程序
💻 C
📖 第 1 页 / 共 3 页
字号:
			break;		case 'd':		case 'D':			config |= TEMIC_SET_PAL_DK;			break;		case 'l':		case 'L':			config |= TEMIC_SET_PAL_L;			break;		case 'b':		case 'B':		case 'g':		case 'G':		default:			config |= TEMIC_SET_PAL_BG;			break;		}		break;	case TUNER_PHILIPS_FQ1216ME:		config &= ~0x0f;		switch (pal[0]) {		case 'i':		case 'I':			config |= PHILIPS_SET_PAL_I;			break;		case 'l':		case 'L':			config |= PHILIPS_SET_PAL_L;			break;		case 'd':		case 'D':		case 'b':		case 'B':		case 'g':		case 'G':			config |= PHILIPS_SET_PAL_BGDK;			break;		}		break;	case TUNER_PHILIPS_ATSC:		/* 0x00 -> ATSC antenna input 1 */		/* 0x01 -> ATSC antenna input 2 */		/* 0x02 -> NTSC antenna input 1 */		/* 0x03 -> NTSC antenna input 2 */				config &= ~0x03;#ifdef VIDEO_MODE_ATSC		if (VIDEO_MODE_ATSC != t->mode)			config |= 2;#endif		/* FIXME: input */		break;	}		/*	 * Philips FI1216MK2 remark from specification :	 * for channel selection involving band switching, and to ensure	 * smooth tuning to the desired channel without causing	 * unnecessary charge pump action, it is recommended to consider	 * the difference between wanted channel frequency and the	 * current channel frequency.  Unnecessary charge pump action	 * will result in very low tuning voltage which may drive the	 * oscillator to extreme conditions.	 *	 * Progfou: specification says to send config data before	 * frequency in case (wanted frequency < current frequency).	 */	div=freq + tun->IFPCoff;	if (t->type == TUNER_PHILIPS_SECAM && freq < t->freq) {		buffer[0] = tun->config;		buffer[1] = config;		buffer[2] = (div>>8) & 0x7f;		buffer[3] = div      & 0xff;	} else {		buffer[0] = (div>>8) & 0x7f;		buffer[1] = div      & 0xff;		buffer[2] = tun->config;		buffer[3] = config;	}	dprintk("tuner: tv 0x%02x 0x%02x 0x%02x 0x%02x\n",		buffer[0],buffer[1],buffer[2],buffer[3]);        if (4 != (rc = i2c_master_send(c,buffer,4)))                printk("tuner: i2c i/o error: rc == %d (should be 4)\n",rc);}static void default_set_radio_freq(struct i2c_client *c, unsigned int freq){	struct tunertype *tun;	struct tuner *t = i2c_get_clientdata(c);        unsigned char buffer[4];	unsigned div;	int rc;	tun=&tuners[t->type];	div = freq + (int)(16*10.7);        buffer[0] = (div>>8) & 0x7f;        buffer[1] = div      & 0xff;	buffer[2] = tun->config;	switch (t->type) {	case TUNER_PHILIPS_FM1216ME_MK3:		buffer[3] = 0x19;		break;	default:		buffer[3] = 0xa4;		break;	}	dprintk("tuner: radio 0x%02x 0x%02x 0x%02x 0x%02x\n",		buffer[0],buffer[1],buffer[2],buffer[3]);        if (4 != (rc = i2c_master_send(c,buffer,4)))                printk("tuner: i2c i/o error: rc == %d (should be 4)\n",rc);}/* ---------------------------------------------------------------------- */// Set tuner frequency,  freq in Units of 62.5kHz = 1/16MHzstatic void set_tv_freq(struct i2c_client *c, unsigned int freq){	struct tuner *t = i2c_get_clientdata(c);	if (t->type == UNSET) {		printk("tuner: tuner type not set\n");		return;	}	if (NULL == t->tv_freq) {		printk("tuner: Huh? tv_set is NULL?\n");		return;	}	if (freq < tv_range[0]*16 || freq > tv_range[1]*16) {		/* FIXME: better do that chip-specific, but		   right now we don't have that in the config		   struct and this way is still better than no		   check at all */		printk("tuner: TV freq (%d.%02d) out of range (%d-%d)\n",		       freq/16,freq%16*100/16,tv_range[0],tv_range[1]);		return;	}	t->tv_freq(c,freq);}static void set_radio_freq(struct i2c_client *c, unsigned int freq){	struct tuner *t = i2c_get_clientdata(c);	if (t->type == UNSET) {		printk("tuner: tuner type not set\n");		return;	}	if (NULL == t->radio_freq) {		printk("tuner: no radio tuning for this one, sorry.\n");		return;	}	if (freq < radio_range[0]*16 || freq > radio_range[1]*16) {		printk("tuner: radio freq (%d.%02d) out of range (%d-%d)\n",		       freq/16,freq%16*100/16,		       radio_range[0],radio_range[1]);		return;	}	t->radio_freq(c,freq);}static void set_type(struct i2c_client *c, unsigned int type){	struct tuner *t = i2c_get_clientdata(c);	if (t->type != UNSET) {		printk("tuner: type already set (%d)\n",t->type);		return;	}	if (type >= TUNERS)		return;	t->type = type;	printk("tuner: type set to %d (%s)\n", t->type,tuners[t->type].name);	strlcpy(c->name, tuners[t->type].name, sizeof(c->name));	switch (t->type) {	case TUNER_MT2032:		microtune_init(c);		break;	default:		t->tv_freq    = default_set_tv_freq;		t->radio_freq = default_set_radio_freq;		break;	}}/* ---------------------------------------------------------------------- */#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)#elsestatic int tuner_attach(struct i2c_adapter *adap, int addr,			unsigned short flags, int kind)#endif{	struct tuner *t;	struct i2c_client *client;	if (this_adap > 0)		return -1;	this_adap++;	        client_template.adapter = adap;        client_template.addr = addr;        printk("tuner: chip found @ 0x%x\n", addr<<1);        if (NULL == (client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL)))                return -ENOMEM;        memcpy(client,&client_template,sizeof(struct i2c_client));        t = kmalloc(sizeof(struct tuner),GFP_KERNEL);        if (NULL == t) {                kfree(client);                return -ENOMEM;        }        memset(t,0,sizeof(struct tuner));	i2c_set_clientdata(client, t);	t->type       = UNSET;	t->radio_if2  = 10700*1000; // 10.7MHz - FM radio        i2c_attach_client(client);	if (type < TUNERS) {		printk("tuner: type forced to %d (%s) [insmod]\n",		       t->type,tuners[t->type].name);		set_type(client,type);	}#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	MOD_INC_USE_COUNT;#endif	return 0;}static int tuner_probe(struct i2c_adapter *adap){	if (0 != addr) {		normal_i2c_range[0] = addr;		normal_i2c_range[1] = addr;	}	this_adap = 0;#ifdef I2C_ADAP_CLASS_TV_ANALOG	if (adap->class & I2C_ADAP_CLASS_TV_ANALOG)		return i2c_probe(adap, &addr_data, tuner_attach);#else	switch (adap->id) {	case I2C_ALGO_BIT | I2C_HW_B_BT848:	case I2C_ALGO_BIT | I2C_HW_B_RIVA:	case I2C_ALGO_SAA7134:	case I2C_ALGO_SAA7146:		return i2c_probe(adap, &addr_data, tuner_attach);		break;	}#endif	return 0;}static int tuner_detach(struct i2c_client *client){	struct tuner *t = i2c_get_clientdata(client);	i2c_detach_client(client);	kfree(t);	kfree(client);#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)	MOD_DEC_USE_COUNT;#endif	return 0;}static inttuner_command(struct i2c_client *client, unsigned int cmd, void *arg){	struct tuner *t = i2c_get_clientdata(client);        unsigned int *iarg = (int*)arg;        switch (cmd) {	/* --- configuration --- */	case TUNER_SET_TYPE:		set_type(client,*iarg);		break;	case AUDC_SET_RADIO:		if (!t->radio) {			set_tv_freq(client,400 * 16);			t->radio = 1;		}		break;	case AUDC_CONFIG_PINNACLE:		switch (*iarg) {		case 2:			dprintk("tuner: pinnacle pal\n");			t->radio_if2 = 33300 * 1000;			break;		case 3:			dprintk("tuner: pinnacle ntsc\n");			t->radio_if2 = 41300 * 1000;			break;		}                break;			/* --- v4l ioctls --- */	/* take care: bttv does userspace copying, we'll get a	   kernel pointer here... */	case VIDIOCSCHAN:	{		struct video_channel *vc = arg;		t->radio = 0;		t->mode = vc->norm;		if (t->freq)			set_tv_freq(client,t->freq);		return 0;	}	case VIDIOCSFREQ:	{		unsigned long *v = arg;		if (t->radio) {			dprintk("tuner: radio freq set to %lu.%02lu\n",				(*v)/16,(*v)%16*100/16);			set_radio_freq(client,*v);		} else {			dprintk("tuner: tv freq set to %lu.%02lu\n",				(*v)/16,(*v)%16*100/16);			set_tv_freq(client,*v);		}		t->freq = *v;		return 0;	}	case VIDIOCGTUNER:	{		struct video_tuner *vt = arg;		if (t->radio)			vt->signal = tuner_signal(client);		return 0;	}	case VIDIOCGAUDIO:	{		struct video_audio *va = arg;		if (t->radio)			va->mode = (tuner_stereo(client) ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO);		return 0;	}	default:		/* nothing */		break;	}		return 0;}/* ----------------------------------------------------------------------- */static struct i2c_driver driver = {#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,54)	.owner          = THIS_MODULE,#endif        .name           = "i2c TV tuner driver",        .id             = I2C_DRIVERID_TUNER,        .flags          = I2C_DF_NOTIFY,        .attach_adapter = tuner_probe,        .detach_client  = tuner_detach,        .command        = tuner_command,};static struct i2c_client client_template ={	I2C_DEVNAME("(tuner unset)"),	.flags      = I2C_CLIENT_ALLOW_USE,        .driver     = &driver,};static int tuner_init_module(void){	i2c_add_driver(&driver);	return 0;}static void tuner_cleanup_module(void){	i2c_del_driver(&driver);}module_init(tuner_init_module);module_exit(tuner_cleanup_module);/* * Overrides for Emacs so that we follow Linus's tabbing style. * --------------------------------------------------------------------------- * Local variables: * c-basic-offset: 8 * End: */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -