pci.h

来自「WinCE5.0部分核心源码」· C头文件 代码 · 共 200 行

//
// Copyright (c) Microsoft Corporation.  All rights reserved.
//
//
// This source code is licensed under Microsoft Shared Source License
// Version 1.0 for Windows CE.
// For a copy of the license visit http://go.microsoft.com/fwlink/?LinkId=3223.
//
// Copyright 2001, Cisco Systems, Inc.  All rights reserved.
// No part of this source, or the resulting binary files, may be reproduced,
// transmitted or redistributed in any form or by any means, electronic or
// mechanical, for any purpose, without the express written permission of Cisco.
//
// pci_h
#ifndef __PCI_H__	
#define __PCI_H__	

#include "ndisver.h"

#define CMD_IO_SPACE            (1<<0)
#define CMD_MEMORY_SPACE        (1<<1)
#define CMD_BUS_MASTER          (1<<2)
#define CMD_SPECIAL_CYCLES      (1<<3)
#define CMD_MEM_WRT_INVALIDATE  (1<<4)
#define CMD_VGA_PALLETTE_SNOOP  (1<<5)
#define CMD_PARITY_RESPONSE     (1<<6)
#define CMD_WAIT_CYCLE_CONTROL  (1<<7)
#define CMD_SERR_ENABLE         (1<<8)
#define CMD_BACK_TO_BACK        (1<<9)

#define PCI_VENDOR_ID_REGISTER      0x00    // PCI Vendor ID Register
#define PCI_DEVICE_ID_REGISTER      0x02    // PCI Device ID Register
#define PCI_CONFIG_ID_REGISTER      0x00    // PCI Configuration ID Register
#define PCI_COMMAND_REGISTER        0x04    // PCI Command Register
#define PCI_STATUS_REGISTER         0x06    // PCI Status Register
#define PCI_REV_ID_REGISTER         0x08    // PCI Revision ID Register
#define PCI_CLASS_CODE_REGISTER     0x09    // PCI Class Code Register
#define PCI_CACHE_LINE_REGISTER     0x0C    // PCI Cache Line Register
#define PCI_LATENCY_TIMER           0x0D    // PCI Latency Timer Register
#define PCI_HEADER_TYPE             0x0E    // PCI Header Type Register
#define PCI_BIST_REGISTER           0x0F    // PCI Built-In SelfTest Register
#define PCI_BAR_0_REGISTER          0x10    // PCI Base Address Register 0
#define PCI_BAR_1_REGISTER          0x14    // PCI Base Address Register 1
#define PCI_BAR_2_REGISTER          0x18    // PCI Base Address Register 2
#define PCI_BAR_3_REGISTER          0x1C    // PCI Base Address Register 3
#define PCI_BAR_4_REGISTER          0x20    // PCI Base Address Register 4
#define PCI_BAR_5_REGISTER          0x24    // PCI Base Address Register 5
#define PCI_SUBVENDOR_ID_REGISTER   0x2C    // PCI SubVendor ID Register
#define PCI_SUBDEVICE_ID_REGISTER   0x2E    // PCI SubDevice ID Register
#define PCI_EXPANSION_ROM           0x30    // PCI Expansion ROM Base Register
#define PCI_INTERRUPT_LINE          0x3C    // PCI Interrupt Line Register
#define PCI_INTERRUPT_PIN           0x3D    // PCI Interrupt Pin Register
#define PCI_MIN_GNT_REGISTER        0x3E    // PCI Min-Gnt Register
#define PCI_MAX_LAT_REGISTER        0x3F    // PCI Max_Lat Register
#define PCI_NODE_ADDR_REGISTER      0x40    // PCI Node Address Register

//#if NDIS_MAJOR_VERSION==0x03
#if NDISVER == 03
typedef struct _PCI_SLOT_NUMBER {
    union {
        struct {
            ULONG   DeviceNumber:5;
            ULONG   FunctionNumber:3;
            ULONG   Reserved:24;
        } bits;
        ULONG   AsULONG;
    } u;
} PCI_SLOT_NUMBER, *PPCI_SLOT_NUMBER;
#endif

#define PCI_TYPE0_ADDRESSES             6
#define PCI_TYPE1_ADDRESSES             2

#pragma pack( push, struct_pack1 )
#pragma pack( 1 )

//#if NDIS_MAJOR_VERSION==0x03
#if NDISVER == 03
typedef struct _PCI_COMMON_CONFIG {
    USHORT  VendorID;                   // (ro)
    USHORT  DeviceID;                   // (ro)
    USHORT  Command;                    // Device control
    USHORT  Status;
    UCHAR   RevisionID;                 // (ro)
    UCHAR   ProgIf;                     // (ro)
    UCHAR   SubClass;                   // (ro)
    UCHAR   BaseClass;                  // (ro)
    UCHAR   CacheLineSize;              // (ro+)
    UCHAR   LatencyTimer;               // (ro+)
    UCHAR   HeaderType;                 // (ro)
    UCHAR   BIST;                       // Built in self test

    union {
        struct _PCI_HEADER_TYPE_0 {
            ULONG   BaseAddresses[PCI_TYPE0_ADDRESSES];
            ULONG   CIS;
            USHORT  SubVendorID;
            USHORT  SubSystemID;
            ULONG   ROMBaseAddress;
            ULONG   Reserved2[2];

            UCHAR   InterruptLine;      //
            UCHAR   InterruptPin;       // (ro)
            UCHAR   MinimumGrant;       // (ro)
            UCHAR   MaximumLatency;     // (ro)
        } type0;


    } u;

    UCHAR   DeviceSpecific[192];

} PCI_COMMON_CONFIG, *PPCI_COMMON_CONFIG;
#endif

#pragma pack( pop, struct_pack1 )


#define PCI_COMMON_HDR_LENGTH (FIELD_OFFSET (PCI_COMMON_CONFIG, DeviceSpecific))

#define PCI_MAX_DEVICES                     32
#define PCI_MAX_FUNCTION                    8

#define PCI_INVALID_VENDORID                0xFFFF

//
// Bit encodings for  PCI_COMMON_CONFIG.HeaderType
//

#define PCI_MULTIFUNCTION                   0x80
#define PCI_DEVICE_TYPE                     0x00
#define PCI_BRIDGE_TYPE                     0x01

//
// Bit encodings for PCI_COMMON_CONFIG.Command
//

#define PCI_ENABLE_IO_SPACE                 0x0001
#define PCI_ENABLE_MEMORY_SPACE             0x0002
#define PCI_ENABLE_BUS_MASTER               0x0004
#define PCI_ENABLE_SPECIAL_CYCLES           0x0008
#define PCI_ENABLE_WRITE_AND_INVALIDATE     0x0010
#define PCI_ENABLE_VGA_COMPATIBLE_PALETTE   0x0020
#define PCI_ENABLE_PARITY                   0x0040  // (ro+)
#define PCI_ENABLE_WAIT_CYCLE               0x0080  // (ro+)
#define PCI_ENABLE_SERR                     0x0100  // (ro+)
#define PCI_ENABLE_FAST_BACK_TO_BACK        0x0200  // (ro)

//
// Bit encodings for PCI_COMMON_CONFIG.Status
//

#define PCI_STATUS_FAST_BACK_TO_BACK        0x0080  // (ro)
#define PCI_STATUS_DATA_PARITY_DETECTED     0x0100
#define PCI_STATUS_DEVSEL                   0x0600  // 2 bits wide
#define PCI_STATUS_SIGNALED_TARGET_ABORT    0x0800
#define PCI_STATUS_RECEIVED_TARGET_ABORT    0x1000
#define PCI_STATUS_RECEIVED_MASTER_ABORT    0x2000
#define PCI_STATUS_SIGNALED_SYSTEM_ERROR    0x4000
#define PCI_STATUS_DETECTED_PARITY_ERROR    0x8000


//
// Bit encodes for PCI_COMMON_CONFIG.u.type0.BaseAddresses
//

#define PCI_ADDRESS_IO_SPACE                0x00000001  // (ro)
#define PCI_ADDRESS_MEMORY_TYPE_MASK        0x00000006  // (ro)
#define PCI_ADDRESS_MEMORY_PREFETCHABLE     0x00000008  // (ro)

#define PCI_TYPE_32BIT      0
#define PCI_TYPE_20BIT      2
#define PCI_TYPE_64BIT      4

//
// Bit encodes for PCI_COMMON_CONFIG.u.type0.ROMBaseAddresses
//

#define PCI_ROMADDRESS_ENABLED              0x00000001


//
// Reference notes for PCI configuration fields:
//
// ro   these field are read only.  changes to these fields are ignored
//
// ro+  these field are intended to be read only and should be initialized
//      by the system to their proper values.  However, driver may change
//      these settings.
//
// ---
//
//      All resources comsumed by a PCI device start as unitialized
//      under NT.  An uninitialized memory or I/O base address can be
//      determined by checking it's corrisponding enabled bit in the
//      PCI_COMMON_CONFIG.Command value.  An InterruptLine is unitialized
//      if it contains the value of -1.
//

#endif