slot coupled patch antenna.hfss

hfss_fullbook_examples

													VtPos(0.0775, 0.7, 0.16)
												$end 'Vertex'
											$end 'NewVertices'
										$end 'GeomTopolBasedOperationIdentityHelper'
									$end 'OperationIdentity'
									BlankOperation=55
									NumToolOperations=1
									ToolOperations(67)
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Patch'
								Flags=''
								Color='(0 128 255)'
								Transparency=0.8
								PartCoordinateSystem=1
								MaterialName='Rogers RT/duroid 5880 (tm)'
								SolveInside=true
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Rectangle'
									ID=78
									ReferenceCoordSystemID=1
									$begin 'RectangleParameters'
										CoordinateSystemID=-1
										XStart='-2cm'
										YStart='-1.5cm'
										ZStart='0.32cm'
										Width='4cm'
										Height='3cm'
										WhichAxis='Z'
									$end 'RectangleParameters'
									ParentPartID=79
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=0
											NumWires=1
											NumLoops=0
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=79
										StartFaceID=-1
										StartEdgeID=80
										StartVertexID=84
										NumNewFaces=0
										NumNewEdges=4
										NumNewVertices=4
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
								$begin 'Operation'
									OperationType='CoverLines'
									ID=88
									$begin 'LocalOperationParameters'
										CoordinateSystemID=-1
										LocalOpPart=79
									$end 'LocalOperationParameters'
									ParentPartID=79
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=1
											NumWires=0
											NumLoops=1
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=-1
										StartFaceID=89
										StartEdgeID=-1
										StartVertexID=-1
										NumNewFaces=1
										NumNewEdges=0
										NumNewVertices=0
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
										$begin 'GeomTopolBasedOperationIdentityHelper'
											$begin 'NewFaces'
												$begin 'Face'
													NormalizedSerialNum=0
													ID=89
													$begin 'FaceGeomTopol'
														FaceTopol(1, 4, 4, 4)
														$begin 'FaceGeometry'
															Area=12
															FcUVMid(0, 8.65108850357265e-018, 0.32)
															$begin 'FcTolVts'
																TolVt(-2, -1.5, 0.32, 0)
																TolVt(2, -1.5, 0.32, 0)
																TolVt(2, 1.5, 0.32, 0)
																TolVt(-2, 1.5, 0.32, 0)
															$end 'FcTolVts'
														$end 'FaceGeometry'
													$end 'FaceGeomTopol'
												$end 'Face'
											$end 'NewFaces'
											$begin 'NewEdges'
											$end 'NewEdges'
											$begin 'NewVertices'
											$end 'NewVertices'
										$end 'GeomTopolBasedOperationIdentityHelper'
									$end 'OperationIdentity'
									ParentOperationID=78
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Air'
								Flags=''
								Color='(255 255 0)'
								Transparency=0.8
								PartCoordinateSystem=1
								MaterialName='vacuum'
								SolveInside=true
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Box'
									ID=90
									ReferenceCoordSystemID=1
									$begin 'BoxParameters'
										CoordinateSystemID=-1
										XPosition='-7cm'
										YPosition='-4.5cm'
										ZPosition='-2cm'
										XSize='12cm'
										YSize='9cm'
										ZSize='4.32cm'
									$end 'BoxParameters'
									ParentPartID=91
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=6
											NumWires=0
											NumLoops=6
											NumCoedges=24
											NumEdges=12
											NumVertices=8
										$end 'Topology'
										BodyID=91
										StartFaceID=92
										StartEdgeID=98
										StartVertexID=110
										NumNewFaces=6
										NumNewEdges=12
										NumNewVertices=8
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Source'
								Flags=''
								Color='(0 128 255)'
								Transparency=0.6
								PartCoordinateSystem=1
								MaterialName='Rogers RT/duroid 5880 (tm)'
								SolveInside=true
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Rectangle'
									ID=118
									ReferenceCoordSystemID=1
									$begin 'RectangleParameters'
										CoordinateSystemID=-1
										XStart='-5cm'
										YStart='-0.2475cm'
										ZStart='0cm'
										Width='0.495cm'
										Height='0.16cm'
										WhichAxis='X'
									$end 'RectangleParameters'
									ParentPartID=119
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=0
											NumWires=1
											NumLoops=0
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=119
										StartFaceID=-1
										StartEdgeID=120
										StartVertexID=124
										NumNewFaces=0
										NumNewEdges=4
										NumNewVertices=4
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
								$begin 'Operation'
									OperationType='CoverLines'
									ID=128
									$begin 'LocalOperationParameters'
										CoordinateSystemID=-1
										LocalOpPart=119
									$end 'LocalOperationParameters'
									ParentPartID=119
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=1
											NumWires=0
											NumLoops=1
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=-1
										StartFaceID=129
										StartEdgeID=-1
										StartVertexID=-1
										NumNewFaces=1
										NumNewEdges=0
										NumNewVertices=0
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
										$begin 'GeomTopolBasedOperationIdentityHelper'
											$begin 'NewFaces'
												$begin 'Face'
													NormalizedSerialNum=0
													ID=129
													$begin 'FaceGeomTopol'
														FaceTopol(1, 4, 4, 4)
														$begin 'FaceGeometry'
															Area=0.0792
															FcUVMid(-5, -1.04083408558608e-017, 0.0800000000000001)
															$begin 'FcTolVts'
																TolVt(-5, -0.2475, 0, 0)
																TolVt(-5, 0.2475, 1.09912079437891e-016, 0)
																TolVt(-5, 0.2475, 0.16, 0)
																TolVt(-5, -0.2475, 0.16, 0)
															$end 'FcTolVts'
														$end 'FaceGeometry'
													$end 'FaceGeomTopol'
												$end 'Face'
											$end 'NewFaces'
											$begin 'NewEdges'
											$end 'NewEdges'
											$begin 'NewVertices'
											$end 'NewVertices'
										$end 'GeomTopolBasedOperationIdentityHelper'
									$end 'OperationIdentity'
									ParentOperationID=118
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
					$end 'ToplevelParts'
					$begin 'OperandParts'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Slot'
								Flags=''
								Color='(255 0 0)'
								Transparency=0.8
								PartCoordinateSystem=1
								MaterialName=''
								SolveInside=true
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Rectangle'
									ID=57
									ReferenceCoordSystemID=1
									$begin 'RectangleParameters'
										CoordinateSystemID=-1
										XStart='-0.0775cm'
										YStart='-0.7cm'
										ZStart='0.16cm'
										Width='0.155cm'
										Height='1.4cm'
										WhichAxis='Z'
									$end 'RectangleParameters'
									ParentPartID=58
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=0
											NumWires=1
											NumLoops=0
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=58
										StartFaceID=-1
										StartEdgeID=59
										StartVertexID=63
										NumNewFaces=0
										NumNewEdges=4
										NumNewVertices=4
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
								$begin 'Operation'
									OperationType='CoverLines'
									ID=67
									$begin 'LocalOperationParameters'
										CoordinateSystemID=-1
										LocalOpPart=58
									$end 'LocalOperationParameters'
									ParentPartID=58
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=1
											NumWires=0
											NumLoops=1
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=-1
										StartFaceID=68
										StartEdgeID=-1
										StartVertexID=-1
										NumNewFaces=1
										NumNewEdges=0
										NumNewVertices=0
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
										$begin 'GeomTopolBasedOperationIdentityHelper'
											$begin 'NewFaces'
												$begin 'Face'
													NormalizedSerialNum=0
													ID=68
													$begin 'FaceGeomTopol'
														FaceTopol(1, 4, 4, 4)
														$begin 'FaceGeometry'
															Area=0.217
															FcUVMid(0, 0, 0.16)
															$begin 'FcTolVts'
																TolVt(-0.0775, -0.7, 0.16, 0)
																TolVt(0.0775, -0.7, 0.16, 0)
																TolVt(0.0775, 0.7, 0.16, 0)
																TolVt(-0.0775, 0.7, 0.16, 0)
															$end 'FcTolVts'
														$end 'FaceGeometry'
													$end 'FaceGeomTopol'
												$end 'Face'
											$end 'NewFaces'
											$begin 'NewEdges'
											$end 'NewEdges'
											$begin 'NewVertices'
											$end 'NewVertices'
										$end 'GeomTopolBasedOperationIdentityHelper'
									$end 'OperationIdentity'
									ParentOperationID=57
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
					$end 'OperandParts'
					$begin 'Planes'
					$end 'Planes'
					$begin 'Points'
					$end 'Points'
					$begin 'GeometryEntityLists'
					$end 'GeometryEntityLists'
				$end 'GeometryOperations'
				$begin 'GeometryDependencies'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 5)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 33)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 43)
						DependencyObject('GeometryBodyOperation', 33)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 45)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 55)
						DependencyObject('GeometryBodyOperation', 45)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=2
						DependencyObject('GeometryBodyOperation', 69)
						DependencyObject('GeometryBodyOperation', 55)
						DependencyObject('GeometryBodyOperation', 67)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 78)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 88)
						DependencyObject('GeometryBodyOperation', 78)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 90)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 118)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 128)
						DependencyObject('GeometryBodyOperation', 118)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 57)