segmented return path.hfss

hfss_fullbook_examples

										ZStart='-1.3mm'
										Width='6cm'
										Height='10cm'
										WhichAxis='Z'
									$end 'RectangleParameters'
									ParentPartID=62
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=0
											NumWires=1
											NumLoops=0
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=62
										StartFaceID=-1
										StartEdgeID=63
										StartVertexID=67
										NumNewFaces=0
										NumNewEdges=4
										NumNewVertices=4
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
								$begin 'Operation'
									OperationType='CoverLines'
									ID=71
									$begin 'LocalOperationParameters'
										CoordinateSystemID=-1
										LocalOpPart=62
									$end 'LocalOperationParameters'
									ParentPartID=62
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=1
											NumWires=0
											NumLoops=1
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=-1
										StartFaceID=72
										StartEdgeID=-1
										StartVertexID=-1
										NumNewFaces=1
										NumNewEdges=0
										NumNewVertices=0
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
										$begin 'GeomTopolBasedOperationIdentityHelper'
											$begin 'NewFaces'
												$begin 'Face'
													NormalizedSerialNum=0
													ID=72
													$begin 'FaceGeomTopol'
														FaceTopol(1, 4, 4, 4)
														$begin 'FaceGeometry'
															Area=60
															FcUVMid(3, 5, -0.13)
															$begin 'FcTolVts'
																TolVt(0, 0, -0.13, 0)
																TolVt(6, 0, -0.13, 0)
																TolVt(6, 10, -0.13, 0)
																TolVt(0, 10, -0.13, 0)
															$end 'FcTolVts'
														$end 'FaceGeometry'
													$end 'FaceGeomTopol'
												$end 'Face'
											$end 'NewFaces'
											$begin 'NewEdges'
											$end 'NewEdges'
											$begin 'NewVertices'
											$end 'NewVertices'
										$end 'GeomTopolBasedOperationIdentityHelper'
									$end 'OperationIdentity'
									ParentOperationID=61
								$end 'Operation'
								$begin 'Operation'
									OperationType='Substract'
									ID=89
									$begin 'SubtractParameters'
										CoordinateSystemID=-1
										KeepOriginals=false
										BlankPart=62
										NumToolParts=1
										ToolParts(78)
									$end 'SubtractParameters'
									ParentPartID=62
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=1
											NumWires=0
											NumLoops=1
											NumCoedges=8
											NumEdges=8
											NumVertices=8
										$end 'Topology'
										BodyID=-1
										StartFaceID=-1
										StartEdgeID=90
										StartVertexID=95
										NumNewFaces=0
										NumNewEdges=5
										NumNewVertices=4
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
										$begin 'GeomTopolBasedOperationIdentityHelper'
											$begin 'NewFaces'
											$end 'NewFaces'
											$begin 'NewEdges'
												$begin 'Edge'
													NormalizedSerialNum=0
													ID=90
													EdgeFaces(72)
													$begin 'EdTolVts'
														TolVt(0, 5.6, -0.13, 0)
														TolVt(4, 5.6, -0.13, 0)
													$end 'EdTolVts'
												$end 'Edge'
												$begin 'Edge'
													NormalizedSerialNum=1
													ID=91
													EdgeFaces(72)
													$begin 'EdTolVts'
														TolVt(4, 5.6, -0.13, 0)
														TolVt(4, 5, -0.13, 0)
													$end 'EdTolVts'
												$end 'Edge'
												$begin 'Edge'
													NormalizedSerialNum=2
													ID=92
													EdgeFaces(72)
													$begin 'EdTolVts'
														TolVt(4, 5, -0.13, 0)
														TolVt(0, 5, -0.13, 0)
													$end 'EdTolVts'
												$end 'Edge'
												$begin 'Edge'
													NormalizedSerialNum=3
													ID=93
													EdgeFaces(72)
													$begin 'EdTolVts'
														TolVt(0, 5, -0.13, 0)
														TolVt(0, 0, -0.13, 0)
													$end 'EdTolVts'
												$end 'Edge'
												$begin 'Edge'
													NormalizedSerialNum=4
													ID=94
													EdgeFaces(72)
													$begin 'EdTolVts'
														TolVt(0, 10, -0.13, 0)
														TolVt(0, 5.6, -0.13, 0)
													$end 'EdTolVts'
												$end 'Edge'
											$end 'NewEdges'
											$begin 'NewVertices'
												$begin 'Vertex'
													NormalizedSerialNum=0
													ID=95
													VtPos(0, 5.6, -0.13)
												$end 'Vertex'
												$begin 'Vertex'
													NormalizedSerialNum=1
													ID=96
													VtPos(4, 5.6, -0.13)
												$end 'Vertex'
												$begin 'Vertex'
													NormalizedSerialNum=2
													ID=97
													VtPos(4, 5, -0.13)
												$end 'Vertex'
												$begin 'Vertex'
													NormalizedSerialNum=3
													ID=98
													VtPos(0, 5, -0.13)
												$end 'Vertex'
											$end 'NewVertices'
										$end 'GeomTopolBasedOperationIdentityHelper'
									$end 'OperationIdentity'
									BlankOperation=71
									NumToolOperations=1
									ToolOperations(87)
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Trace'
								Flags=''
								Color='(255 128 128)'
								Transparency=0.6
								PartCoordinateSystem=1
								MaterialName='My_FR4'
								SolveInside=true
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Rectangle'
									ID=103
									ReferenceCoordSystemID=99
									$begin 'RectangleParameters'
										CoordinateSystemID=-1
										XStart='0cm'
										YStart='0cm'
										ZStart='0cm'
										Width='3mm'
										Height='8.2cm'
										WhichAxis='Z'
									$end 'RectangleParameters'
									ParentPartID=104
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=0
											NumWires=1
											NumLoops=0
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=104
										StartFaceID=-1
										StartEdgeID=105
										StartVertexID=109
										NumNewFaces=0
										NumNewEdges=4
										NumNewVertices=4
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
								$begin 'Operation'
									OperationType='CoverLines'
									ID=113
									$begin 'LocalOperationParameters'
										CoordinateSystemID=-1
										LocalOpPart=104
									$end 'LocalOperationParameters'
									ParentPartID=104
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=1
											NumWires=0
											NumLoops=1
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=-1
										StartFaceID=114
										StartEdgeID=-1
										StartVertexID=-1
										NumNewFaces=1
										NumNewEdges=0
										NumNewVertices=0
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
										$begin 'GeomTopolBasedOperationIdentityHelper'
											$begin 'NewFaces'
												$begin 'Face'
													NormalizedSerialNum=0
													ID=114
													$begin 'FaceGeomTopol'
														FaceTopol(1, 4, 4, 4)
														$begin 'FaceGeometry'
															Area=2.46
															FcUVMid(1.15, 4.9, 0)
															$begin 'FcTolVts'
																TolVt(1, 0.8, 0, 0)
																TolVt(1.3, 0.8, 0, 0)
																TolVt(1.3, 9, 0, 0)
																TolVt(1, 9, 0, 0)
															$end 'FcTolVts'
														$end 'FaceGeometry'
													$end 'FaceGeomTopol'
												$end 'Face'
											$end 'NewFaces'
											$begin 'NewEdges'
											$end 'NewEdges'
											$begin 'NewVertices'
											$end 'NewVertices'
										$end 'GeomTopolBasedOperationIdentityHelper'
									$end 'OperationIdentity'
									ParentOperationID=103
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Source'
								Flags=''
								Color='(255 0 0)'
								Transparency=0.6
								PartCoordinateSystem=1
								MaterialName='My_FR4'
								SolveInside=true
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Rectangle'
									ID=115
									ReferenceCoordSystemID=99
									$begin 'RectangleParameters'
										CoordinateSystemID=-1
										XStart='0cm'
										YStart='0cm'
										ZStart='0cm'
										Width='-1.3mm'
										Height='3mm'
										WhichAxis='Y'
									$end 'RectangleParameters'
									ParentPartID=116
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=0
											NumWires=1
											NumLoops=0
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=116
										StartFaceID=-1
										StartEdgeID=117
										StartVertexID=121
										NumNewFaces=0
										NumNewEdges=4
										NumNewVertices=4
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
								$begin 'Operation'
									OperationType='CoverLines'
									ID=125
									$begin 'LocalOperationParameters'
										CoordinateSystemID=-1
										LocalOpPart=116
									$end 'LocalOperationParameters'
									ParentPartID=116
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=1
											NumWires=0
											NumLoops=1
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=-1
										StartFaceID=126
										StartEdgeID=-1
										StartVertexID=-1
										NumNewFaces=1
										NumNewEdges=0
										NumNewVertices=0
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
										$begin 'GeomTopolBasedOperationIdentityHelper'
											$begin 'NewFaces'
												$begin 'Face'
													NormalizedSerialNum=0
													ID=126
													$begin 'FaceGeomTopol'
														FaceTopol(1, 4, 4, 4)
														$begin 'FaceGeometry'
															Area=0.039
															FcUVMid(1.15, 0.8, -0.065)
															$begin 'FcTolVts'
																TolVt(1, 0.8, 0, 0)
																TolVt(1, 0.8, -0.13, 0)
																TolVt(1.3, 0.8, -0.13, 0)
																TolVt(1.3, 0.8, -5.5107285922007e-017, 0)
															$end 'FcTolVts'
														$end 'FaceGeometry'
													$end 'FaceGeomTopol'
												$end 'Face'
											$end 'NewFaces'
											$begin 'NewEdges'
											$end 'NewEdges'
											$begin 'NewVertices'
											$end 'NewVertices'
										$end 'GeomTopolBasedOperationIdentityHelper'
									$end 'OperationIdentity'
									ParentOperationID=115
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Resistor'
								Flags=''
								Color='(255 0 0)'
								Transparency=0.6
								PartCoordinateSystem=1
								MaterialName='My_FR4'
								SolveInside=true
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Rectangle'
									ID=131
									ReferenceCoordSystemID=127
									$begin 'RectangleParameters'
										CoordinateSystemID=-1
										XStart='0cm'
										YStart='0cm'
										ZStart='0cm'
										Width='-1.3mm'
										Height='3mm'
										WhichAxis='Y'
									$end 'RectangleParameters'
									ParentPartID=132
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=0
											NumWires=1
											NumLoops=0
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=132
										StartFaceID=-1
										StartEdgeID=133
										StartVertexID=137
										NumNewFaces=0
										NumNewEdges=4
										NumNewVertices=4
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
								$begin 'Operation'
									OperationType='CoverLines'
									ID=141
									$begin 'LocalOperationParameters'
										CoordinateSystemID=-1
										LocalOpPart=132
									$end 'LocalOperationParameters'
									ParentPartID=132
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=1
											NumWires=0
											NumLoops=1
											NumCoedges=4
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=-1
										StartFaceID=142