patch antenna.hfss

hfss_fullbook_examples

									ReferenceCoordSystemID=1
									$begin 'CylinderParameters'
										CoordinateSystemID=-1
										XCenter='-0.5cm'
										YCenter='0cm'
										ZCenter='0cm'
										Radius='0.16cm'
										Height='-0.5cm'
										WhichAxis='Z'
									$end 'CylinderParameters'
									ParentPartID=67
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=3
											NumWires=0
											NumLoops=4
											NumCoedges=4
											NumEdges=2
											NumVertices=2
										$end 'Topology'
										BodyID=67
										StartFaceID=68
										StartEdgeID=71
										StartVertexID=73
										NumNewFaces=3
										NumNewEdges=2
										NumNewVertices=2
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Coax_Pin'
								Flags=''
								Color='(132 132 193)'
								Transparency=0.8
								PartCoordinateSystem=1
								MaterialName='pec'
								SolveInside=false
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Cylinder'
									ID=75
									ReferenceCoordSystemID=1
									$begin 'CylinderParameters'
										CoordinateSystemID=-1
										XCenter='-0.5cm'
										YCenter='0cm'
										ZCenter='0cm'
										Radius='0.07cm'
										Height='-0.5cm'
										WhichAxis='Z'
									$end 'CylinderParameters'
									ParentPartID=76
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=3
											NumWires=0
											NumLoops=4
											NumCoedges=4
											NumEdges=2
											NumVertices=2
										$end 'Topology'
										BodyID=76
										StartFaceID=77
										StartEdgeID=80
										StartVertexID=82
										NumNewFaces=3
										NumNewEdges=2
										NumNewVertices=2
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Port1'
								Flags=''
								Color='(132 132 193)'
								Transparency=0.4
								PartCoordinateSystem=1
								MaterialName='pec'
								SolveInside=false
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Circle'
									ID=84
									ReferenceCoordSystemID=1
									$begin 'CircleParameters'
										CoordinateSystemID=-1
										XCenter='-0.5cm'
										YCenter='0cm'
										ZCenter='-0.5cm'
										Radius='0.16cm'
										WhichAxis='Z'
									$end 'CircleParameters'
									ParentPartID=85
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=0
											NumWires=1
											NumLoops=0
											NumCoedges=1
											NumEdges=1
											NumVertices=1
										$end 'Topology'
										BodyID=85
										StartFaceID=-1
										StartEdgeID=86
										StartVertexID=87
										NumNewFaces=0
										NumNewEdges=1
										NumNewVertices=1
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
								$begin 'Operation'
									OperationType='CoverLines'
									ID=88
									$begin 'LocalOperationParameters'
										CoordinateSystemID=-1
										LocalOpPart=85
									$end 'LocalOperationParameters'
									ParentPartID=85
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=1
											NumWires=0
											NumLoops=1
											NumCoedges=1
											NumEdges=1
											NumVertices=1
										$end 'Topology'
										BodyID=-1
										StartFaceID=89
										StartEdgeID=-1
										StartVertexID=-1
										NumNewFaces=1
										NumNewEdges=0
										NumNewVertices=0
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
										$begin 'GeomTopolBasedOperationIdentityHelper'
											$begin 'NewFaces'
												$begin 'Face'
													NormalizedSerialNum=0
													ID=89
													$begin 'FaceGeomTopol'
														FaceTopol(1, 1, 1, 1)
														$begin 'FaceGeometry'
															Area=0.0804247719318987
															FcUVMid(-0.5, -1.38777878078145e-017, -0.5)
															$begin 'FcTolVts'
																TolVt(-0.34, 0, -0.5, 0)
															$end 'FcTolVts'
														$end 'FaceGeometry'
													$end 'FaceGeomTopol'
												$end 'Face'
											$end 'NewFaces'
											$begin 'NewEdges'
											$end 'NewEdges'
											$begin 'NewVertices'
											$end 'NewVertices'
										$end 'GeomTopolBasedOperationIdentityHelper'
									$end 'OperationIdentity'
									ParentOperationID=84
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Probe'
								Flags=''
								Color='(132 132 193)'
								Transparency=0.8
								PartCoordinateSystem=1
								MaterialName='pec'
								SolveInside=false
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Cylinder'
									ID=90
									ReferenceCoordSystemID=1
									$begin 'CylinderParameters'
										CoordinateSystemID=-1
										XCenter='-0.5cm'
										YCenter='0cm'
										ZCenter='0cm'
										Radius='0.07cm'
										Height='0.32cm'
										WhichAxis='Z'
									$end 'CylinderParameters'
									ParentPartID=91
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=3
											NumWires=0
											NumLoops=4
											NumCoedges=4
											NumEdges=2
											NumVertices=2
										$end 'Topology'
										BodyID=91
										StartFaceID=92
										StartEdgeID=95
										StartVertexID=97
										NumNewFaces=3
										NumNewEdges=2
										NumNewVertices=2
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Air'
								Flags=''
								Color='(132 132 193)'
								Transparency=0.8
								PartCoordinateSystem=1
								MaterialName='vacuum'
								SolveInside=true
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Box'
									ID=99
									ReferenceCoordSystemID=1
									$begin 'BoxParameters'
										CoordinateSystemID=-1
										XPosition='-5cm'
										YPosition='-4.5cm'
										ZPosition='0cm'
										XSize='10cm'
										YSize='9cm'
										ZSize='3.32cm'
									$end 'BoxParameters'
									ParentPartID=100
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=6
											NumWires=0
											NumLoops=6
											NumCoedges=24
											NumEdges=12
											NumVertices=8
										$end 'Topology'
										BodyID=100
										StartFaceID=101
										StartEdgeID=107
										StartVertexID=119
										NumNewFaces=6
										NumNewEdges=12
										NumNewVertices=8
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
					$end 'ToplevelParts'
					$begin 'OperandParts'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Cut_Out'
								Flags=''
								Color='(132 132 193)'
								Transparency=0.6
								PartCoordinateSystem=1
								MaterialName=''
								SolveInside=true
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Circle'
									ID=45
									ReferenceCoordSystemID=1
									$begin 'CircleParameters'
										CoordinateSystemID=-1
										XCenter='-0.5cm'
										YCenter='0cm'
										ZCenter='0cm'
										Radius='0.16cm'
										WhichAxis='Z'
									$end 'CircleParameters'
									ParentPartID=46
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=0
											NumWires=1
											NumLoops=0
											NumCoedges=1
											NumEdges=1
											NumVertices=1
										$end 'Topology'
										BodyID=46
										StartFaceID=-1
										StartEdgeID=47
										StartVertexID=48
										NumNewFaces=0
										NumNewEdges=1
										NumNewVertices=1
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
								$begin 'Operation'
									OperationType='CoverLines'
									ID=49
									$begin 'LocalOperationParameters'
										CoordinateSystemID=-1
										LocalOpPart=46
									$end 'LocalOperationParameters'
									ParentPartID=46
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=1
											NumWires=0
											NumLoops=1
											NumCoedges=1
											NumEdges=1
											NumVertices=1
										$end 'Topology'
										BodyID=-1
										StartFaceID=50
										StartEdgeID=-1
										StartVertexID=-1
										NumNewFaces=1
										NumNewEdges=0
										NumNewVertices=0
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
										$begin 'GeomTopolBasedOperationIdentityHelper'
											$begin 'NewFaces'
												$begin 'Face'
													NormalizedSerialNum=0
													ID=50
													$begin 'FaceGeomTopol'
														FaceTopol(1, 1, 1, 1)
														$begin 'FaceGeometry'
															Area=0.0804247719318987
															FcUVMid(-0.5, -1.38777878078145e-017, 0)
															$begin 'FcTolVts'
																TolVt(-0.34, 0, 0, 0)
															$end 'FcTolVts'
														$end 'FaceGeometry'
													$end 'FaceGeomTopol'
												$end 'Face'
											$end 'NewFaces'
											$begin 'NewEdges'
											$end 'NewEdges'
											$begin 'NewVertices'
											$end 'NewVertices'
										$end 'GeomTopolBasedOperationIdentityHelper'
									$end 'OperationIdentity'
									ParentOperationID=45
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
					$end 'OperandParts'
					$begin 'Planes'
					$end 'Planes'
					$begin 'Points'
					$end 'Points'
					$begin 'GeometryEntityLists'
					$end 'GeometryEntityLists'
				$end 'GeometryOperations'
				$begin 'GeometryDependencies'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 5)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 33)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 43)
						DependencyObject('GeometryBodyOperation', 33)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=2
						DependencyObject('GeometryBodyOperation', 51)
						DependencyObject('GeometryBodyOperation', 43)
						DependencyObject('GeometryBodyOperation', 49)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 54)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 64)
						DependencyObject('GeometryBodyOperation', 54)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 66)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 75)
						DependencyObject('CoordinateSystem', 1)