uhf probe.hfss

hfss_fullbook_examples

											NumCoedges=4
											NumEdges=2
											NumVertices=2
										$end 'Topology'
										BodyID=30
										StartFaceID=31
										StartEdgeID=34
										StartVertexID=36
										NumNewFaces=3
										NumNewEdges=2
										NumNewVertices=2
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
								$begin 'Operation'
									OperationType='Substract'
									ID=38
									$begin 'SubtractParameters'
										CoordinateSystemID=-1
										KeepOriginals=false
										BlankPart=30
										NumToolParts=1
										ToolParts(45)
									$end 'SubtractParameters'
									ParentPartID=30
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=4
											NumWires=0
											NumLoops=8
											NumCoedges=8
											NumEdges=4
											NumVertices=4
										$end 'Topology'
										BodyID=-1
										StartFaceID=39
										StartEdgeID=40
										StartVertexID=42
										NumNewFaces=1
										NumNewEdges=2
										NumNewVertices=2
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
										$begin 'GeomTopolBasedOperationIdentityHelper'
											$begin 'NewFaces'
												$begin 'Face'
													NormalizedSerialNum=0
													ID=39
													$begin 'FaceGeomTopol'
														FaceTopol(2, 2, 2, 2)
														$begin 'FaceGeometry'
															Area=13.6659280431156
															FcUVMid(-0.435, 5.32703763912734e-017, 2.5)
															$begin 'FcTolVts'
																TolVt(0.435, 0, 0, 0)
																TolVt(0.435, 0, 5, 0)
															$end 'FcTolVts'
														$end 'FaceGeometry'
													$end 'FaceGeomTopol'
												$end 'Face'
											$end 'NewFaces'
											$begin 'NewEdges'
												$begin 'Edge'
													NormalizedSerialNum=0
													ID=40
													EdgeFaces(32, 39)
													$begin 'EdTolVts'
														TolVt(0.435, 0, 0, 0)
													$end 'EdTolVts'
												$end 'Edge'
												$begin 'Edge'
													NormalizedSerialNum=1
													ID=41
													EdgeFaces(33, 39)
													$begin 'EdTolVts'
														TolVt(0.435, 0, 5, 0)
													$end 'EdTolVts'
												$end 'Edge'
											$end 'NewEdges'
											$begin 'NewVertices'
												$begin 'Vertex'
													NormalizedSerialNum=0
													ID=42
													VtPos(0.435, 0, 0)
												$end 'Vertex'
												$begin 'Vertex'
													NormalizedSerialNum=1
													ID=43
													VtPos(0.435, 0, 5)
												$end 'Vertex'
											$end 'NewVertices'
										$end 'GeomTopolBasedOperationIdentityHelper'
									$end 'OperationIdentity'
									BlankOperation=29
									NumToolOperations=1
									ToolOperations(44)
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='ring_inner1'
								Flags=''
								Color='(132 132 193)'
								Transparency=0.8
								PartCoordinateSystem=1
								MaterialName=''
								SolveInside=false
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Cylinder'
									ID=44
									ReferenceCoordSystemID=1
									$begin 'CylinderParameters'
										CoordinateSystemID=-1
										XCenter='0in'
										YCenter='0in'
										ZCenter='0in'
										Radius='0.435in'
										Height='5in'
										WhichAxis='Z'
									$end 'CylinderParameters'
									ParentPartID=45
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=3
											NumWires=0
											NumLoops=4
											NumCoedges=4
											NumEdges=2
											NumVertices=2
										$end 'Topology'
										BodyID=45
										StartFaceID=46
										StartEdgeID=49
										StartVertexID=51
										NumNewFaces=3
										NumNewEdges=2
										NumNewVertices=2
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Arm_1'
								Flags=''
								Color='(132 132 193)'
								Transparency=0.8
								PartCoordinateSystem=1
								MaterialName=''
								SolveInside=false
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Box'
									ID=53
									ReferenceCoordSystemID=1
									$begin 'BoxParameters'
										CoordinateSystemID=-1
										XPosition='-0.1in'
										YPosition='-0.31in'
										ZPosition='5in'
										XSize='0.2in'
										YSize='-4.69in'
										ZSize='-0.065in'
									$end 'BoxParameters'
									ParentPartID=54
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=6
											NumWires=0
											NumLoops=6
											NumCoedges=24
											NumEdges=12
											NumVertices=8
										$end 'Topology'
										BodyID=54
										StartFaceID=55
										StartEdgeID=61
										StartVertexID=73
										NumNewFaces=6
										NumNewEdges=12
										NumNewVertices=8
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='center_pin'
								Flags=''
								Color='(132 132 193)'
								Transparency=0.8
								PartCoordinateSystem=1
								MaterialName=''
								SolveInside=false
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Cylinder'
									ID=117
									ReferenceCoordSystemID=1
									$begin 'CylinderParameters'
										CoordinateSystemID=-1
										XCenter='0in'
										YCenter='0in'
										ZCenter='0in'
										Radius='0.1in'
										Height='5.1in'
										WhichAxis='Z'
									$end 'CylinderParameters'
									ParentPartID=118
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=3
											NumWires=0
											NumLoops=4
											NumCoedges=4
											NumEdges=2
											NumVertices=2
										$end 'Topology'
										BodyID=118
										StartFaceID=119
										StartEdgeID=122
										StartVertexID=124
										NumNewFaces=3
										NumNewEdges=2
										NumNewVertices=2
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='Arm_2'
								Flags=''
								Color='(132 132 193)'
								Transparency=0.8
								PartCoordinateSystem=1
								MaterialName=''
								SolveInside=false
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Box'
									ID=126
									ReferenceCoordSystemID=1
									$begin 'BoxParameters'
										CoordinateSystemID=-1
										XPosition='-0.1in'
										YPosition='0in'
										ZPosition='5.1in'
										XSize='0.2in'
										YSize='5in'
										ZSize='-0.065in'
									$end 'BoxParameters'
									ParentPartID=127
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=6
											NumWires=0
											NumLoops=6
											NumCoedges=24
											NumEdges=12
											NumVertices=8
										$end 'Topology'
										BodyID=127
										StartFaceID=128
										StartEdgeID=134
										StartVertexID=146
										NumNewFaces=6
										NumNewEdges=12
										NumNewVertices=8
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
						$begin 'GeometryPart'
							$begin 'Attributes'
								Name='pin'
								Flags=''
								Color='(132 132 193)'
								Transparency=0.8
								PartCoordinateSystem=1
								MaterialName=''
								SolveInside=false
							$end 'Attributes'
							$begin 'Operations'
								$begin 'Operation'
									OperationType='Cylinder'
									ID=154
									ReferenceCoordSystemID=1
									$begin 'CylinderParameters'
										CoordinateSystemID=-1
										XCenter='0in'
										YCenter='1in'
										ZCenter='0in'
										Radius='0.0625in'
										Height='5.1in'
										WhichAxis='Z'
									$end 'CylinderParameters'
									ParentPartID=155
									$begin 'OperationIdentity'
										$begin 'Topology'
											NumLumps=1
											NumShells=1
											NumFaces=3
											NumWires=0
											NumLoops=4
											NumCoedges=4
											NumEdges=2
											NumVertices=2
										$end 'Topology'
										BodyID=155
										StartFaceID=156
										StartEdgeID=159
										StartVertexID=161
										NumNewFaces=3
										NumNewEdges=2
										NumNewVertices=2
										FaceNameAndIDMap()
										EdgeNameAndIDMap()
										VertexNameAndIDMap()
									$end 'OperationIdentity'
								$end 'Operation'
							$end 'Operations'
						$end 'GeometryPart'
					$end 'OperandParts'
					$begin 'Planes'
					$end 'Planes'
					$begin 'Points'
					$end 'Points'
					$begin 'GeometryEntityLists'
					$end 'GeometryEntityLists'
				$end 'GeometryOperations'
				$begin 'GeometryDependencies'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 14)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=2
						DependencyObject('GeometryBodyOperation', 23)
						DependencyObject('GeometryBodyOperation', 14)
						DependencyObject('GeometryBodyOperation', 5)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=3
						DependencyObject('GeometryBodyOperation', 81)
						DependencyObject('GeometryBodyOperation', 23)
						DependencyObject('GeometryBodyOperation', 38)
						DependencyObject('GeometryBodyOperation', 53)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=4
						DependencyObject('GeometryBodyOperation', 163)
						DependencyObject('GeometryBodyOperation', 81)
						DependencyObject('GeometryBodyOperation', 117)
						DependencyObject('GeometryBodyOperation', 126)
						DependencyObject('GeometryBodyOperation', 154)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 167)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 171)
						DependencyObject('GeometryBodyOperation', 167)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 173)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 5)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 29)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=2
						DependencyObject('GeometryBodyOperation', 38)
						DependencyObject('GeometryBodyOperation', 29)
						DependencyObject('GeometryBodyOperation', 44)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 44)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 53)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 117)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 126)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
					$begin 'DependencyInformation'
						NumParents=1
						DependencyObject('GeometryBodyOperation', 154)
						DependencyObject('CoordinateSystem', 1)
					$end 'DependencyInformation'
				$end 'GeometryDependencies'
			$end 'GeometryCore'
		$end 'ModelSetup'
		$begin 'BoundarySetup'
			$begin 'GlobalBoundData'
				PortImpedance='1'
				GlobalMaterialEnv='vacuum'
			$end 'GlobalBoundData'
			$begin 'Boundaries'