📄 00000047.htm
字号:
<HTML><HEAD> <TITLE>BBS水木清华站∶精华区</TITLE></HEAD><BODY><CENTER><H1>BBS水木清华站∶精华区</H1></CENTER>发信人: suning (苏宁~~小坏蛋), 信区: Linux <BR>标 题: Intel 810 Mainboard Ulities LinuxServer Setup[1] <BR>发信站: BBS 水木清华站 (Fri Apr 14 15:56:11 2000) <BR> <BR> <BR> <BR>Intel 810 Mainboard Ulities Linux Server Installation[1] <BR> Multimedia Enjoy Times!! <BR> Nerv.org <BR>1. First we decided to install Video card server on Linux. <BR> We think youhave already done this: <BR> 1. install the Xwindow system on you computerand linux console work <BR> smoothly. <BR> 2. Know how to type a command line in the console //:P <BR> 3. Know how to use the dialog box supplied by system. //:p <BR>2. What we need: <BR> 1. Linux 2.2[we recommended Redhat 6.2 or 6.1 version] <BR> 2. Intel 810 Video card server for Linux : <BR> We can find it on <BR> ftp floder at: /pub/driver/i810/ at 166.111.160.18 <BR> Or other Ftp site on Cernet or Chinanet. <BR> [Note] Do not use the driver supplied by Intel corp.It is very hard to g <BR>et <BR> the driver to work. Always does not work and very difficult to <BR> compile. <BR> We need such files: <BR> [Redhat 6.0] <BR> I810Gtt-0.1-rh60.i386.rpm <BR> XFCom-i810-glibc2.1-1.0.0-rh60.i386.rpm <BR> [Redhat 6.1 or uppervision] <BR> I810Gtt-0.1-rh61.i386.rpm <BR> XFCom-i810-glibc2.1-1.0.0-rh61.i386.rpm <BR> 3.Start Installation!! <BR> Now the exciting moment coming! <BR> After three lines we entered, we will begin enjoying the X window <BR> Server On Linux! <BR> [Command Lists] <BR> Note: You just need excute these Commands line by line,pay attention to <BR> the Notes to each command.(Red hat 6.0 In default,We will <BR> provide the coreponding command in each Note: <BR> 1 ] RPM -i I810Gtt-0.1-rh60.i386.rpm <BR> Note[ Redhat6.1] : <BR> RPM -i I810Gtt-0.1-rh61.i386.rpm <BR> 2 ] RPM -i XFCom-i810-glibc2.1-1.0.0-rh60.i386.rpm <BR> Note [Redhat6.1] : <BR> RPM -i XFCom-i810-glibc2.1-1.0.0-rh61.i386.rpm <BR> 3 ] ln -s /usr/X11R6/bin/XFCom_810 /usr/X1R6/bin/XF86_SVGA <BR> Note: <BR> Most time System will reported that XF86_SVGA already exists. <BR> This Does Not matter.We backup it to another directory.T <BR>hen remove <BR> this file :XF86_SVGA and excute this command again.(i) <BR> 4 ] XConfigurator <BR> Note: Now we start to config the video card: <BR> 1). In the first dialog box we need to select the videocard: <BR> [Redhat6.0] Riva 128 [Redhat6.1] Intel740 <BR> <BR> 2 Select your Monitor type: <BR> This is up to your monitor type,from redhat6.0 it supports <BR> a lot of monitor.[We have a Acer acerview 54e also can <BR> be <BR> finded in Linux lists.] So select you monitor type yourself. <BR> 3) Now the system will confirm you to probe the server you <BR> selecte: <BR> @Select [Probe] <BR> Now we can see the screen blinkS.It means we have install the <BR> X server successfully. ln the following we will see the Xwindow. <BR> and there is a time limit for you to confirm the X window work <BR> or not. <BR> @Select [Yes] <BR> @Select [Yes]/[NO] <BR> Linux will confirm you if you want to <BR> change your raphic.Here the selection up <BR> to you favoriate. We <BR> recomended you to select No to use console login. If you <BR> need X window ,just type "startx". <BR> @OK <BR> Now we finished confiure the X window System and it will work <BR> now. <BR> 4. Finished, Enjoy now! <BR> After the Configurator,will exit to console mode. Type startx. X wind <BR>ow Runs up <BR> now! <BR>PS: <BR> Platform Manufature <BR> Intel 810 PW65D DFI <BR> 64MB RAM IBM <BR> 10.GB IBM <BR> <BR> Accer view 54e Accer <BR> Redhat6.0/6.1 Redhat <BR>PS: <BR> The next section we will show how to use OSS(open sound system) to configu <BR>re <BR>the intergrated soundcard[Intel810 board] <BR> <BR>-- <BR>※ 修改:·suning 於 Apr 14 16:03:12 修改本文·[FROM: 211.69.207.148] <BR>※ 来源:·BBS 水木清华站 smth.org·[FROM: 211.69.207.148] <BR><CENTER><H1>BBS水木清华站∶精华区</H1></CENTER></BODY></HTML>
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -