📄 00000007.htm
字号:
_________________________________________________________________ <BR> <BR>4. Video cards <BR> <BR> Linux will work with all video cards in text mode, VGA cards not <BR> listed below probably will still work with mono VGA and/or standard <BR> VGA drivers. <BR> <BR> If you're looking into buying a cheap video card to run X, keep in <BR> mind that accelerated cards (ATI, S3) are MUCH faster than <BR> unaccelerated or partially accelerated (Cirrus, WD) cards. S3 801 <BR> (ISA) and 805 (VLB) based cards and ATI Graphics Wonder (Mach32) are <BR> good low-end accelerated cards. <BR> <BR> Historically Diamond video cards were not supported by XFree86. <BR> However, as of September 27, 1994, Diamond has verbally agreed to <BR> provide The XFree86 Project, Inc. with detailed information about <BR> Diamond products. <BR> <BR> 32 bit color means 24 bit color aligned on 32 bit boundaries. Modes <BR> with 24 bit packed pixels are not supported, so cards that can display <BR> 24 bit color in other OS's may not able to do this in X. These cards <BR> include Mach32, Cirrus 542x, S3 801/805, ET4000, and others. <BR> <BR> SVGALIB <BR> * VGA <BR> * EGA <BR> * ATI Mach32 <BR> * Cirrus 542x <BR> * OAK OTI-037/67/77/87 <BR> * Trident TVGA8900/9000 <BR> * Tseng ET3000/ET4000/W32 <BR> <BR> XFREE86 3.1 <BR> <BR> Accelerated support (8 bpp unless noted) <BR> * ATI Mach8 <BR> * ATI Mach32 (16 bpp - does not work with all Mach32 cards) <BR> * Cirrus Logic 5420, 542x/5430 (16 bpp), 5434 (16/32 bpp), 62x5 <BR> * IBM 8514/A <BR> * IBM XGA, XGA-II <BR> * IIT AGX-010/014/015/016 <BR> * S3 911, 924, 801, 805, 928, 864, 964 <BR> + S3 801/805, AT&T 20C490 (or similar) RAMDAC (16 bpp) <BR> Actix GE 32, Orchid Fahreneht 1280+, STB PowerGraph <BR> + S3 805, S3 GENDAC (16 bpp) <BR> Miro 10SD VLB/PCI, SPEA Mirage VLB <BR> + S3 805, Diamond SS2410 RAMDAC, ICD2061A Clockchip <BR> Diamond Stealth 24 VLB <BR> + S3 928, AT&T 20C490 RAMDAC (16 bpp) <BR> Actix Ultra <BR> + S3 928, Sierra SC15025 RAMDAC, ICD2061A Clockchip (16/32 bpp) <BR> ELSA Winner 1000 ISA/VLB/EISA <BR> + S3 928, Bt485 RAMDAC, ICD2061A Clockchip <BR> STB Pegasus VL <BR> + S3 928, Bt485 RAMDAC, SC11412 Clockchip (16 bpp) <BR> SPEA Mercury VLB <BR> + S3 928, Bt485 RAMDAC, ICD2061A Clockchip <BR> #9 GXE Level 10/11/12 <BR> + S3 928, Ti3020 RAMDAC, ICD2061A Clockchip <BR> #9 GXE Level 14/16 <BR> + S3 864, AT&T 20C498 or STG1700 RAMDAC, ICD2061A or ICS9161 <BR> Clockchip (16/32 bpp) <BR> ELSA Winner 1000 PRO VLB/PCI <BR> + S3 864, STG1700 RAMDAC, ICD2061A Clockchip (16/32? bpp) <BR> Actix GE 64 VLB <BR> + S3 864, 20C498 RAMDAC, ICS2595 Clockchip (16 bpp) <BR> SPEA Mirage P64 DRAM <BR> + S3 964, AT&T 20C505 RAMDAC, ICD2061A Clockchip (16/32 bpp) <BR> Miro Crystal 20SV PCI <BR> + S3 964, Bt485 RAMDAC, ICD2061A Clockchip (16/32 bpp) <BR> Diamond Stealth 64 <BR> + S3 964, Ti3020 RAMDAC, ICD2061A Clockchip <BR> ELSA Winner 2000 PRO PCI <BR> + S3 964, Ti3025 RAMDAC, Ti3025 Clockchip (16/32 bpp) <BR> #9 GXE64 Pro VLB/PCI <BR> * Tseng ET4000/W32/W32i/W32p <BR> * Weitek P9000 (16/32 bpp) <BR> + Diamond Viper VLB/PCI <BR> + Orchid P9000 <BR> * Western Digital WD90C31/33 <BR> <BR> Unaccelerated <BR> * ATI VGA Wonder, 18800*, 28800*, 68800*, 88800 (Mach64) <BR> * Avance Logic AL2101 <BR> * Cirrus Logic 6420 <BR> * Compaq AVGA <BR> * Genoa GVGA <BR> * MCGA (320x200) <BR> * MX MX68000/MX68010 <BR> * NCR 77C22, 77C22E, 77C22E+ <BR> * OAK OTI-067, OTI-077 <BR> * Trident TVGA8800, TVGA8900, TVGA9xxx (not very fast) <BR> * Tseng ET3000, ET4000AX <BR> * VGA (standard VGA, 4 bit, slow) <BR> * Video 7 / Headland Technologies HT216-32 <BR> * Western Digital/Paradise PVGA1, WD90C00/10/11/24/30/31/33 <BR> <BR> Monochrome <BR> * Hercules mono <BR> * Hyundai HGC-1280 <BR> * Sigma LaserView PLUS <BR> * VGA mono <BR> <BR> =others= <BR> * Chips & Technologies <BR> [1] /pub/Linux/X11/X-servers/chips-3.1.tar.gz <BR> <BR> Work in progress <BR> * ATI Mach64 accelerated support <BR> * Compaq QVision <BR> * Number Nine Imagine 128 <BR> <BR> No, I do not know when support for these cards will be finished, <BR> please don't ask me. If you want support for these cards now get <BR> Accelerated-X. <BR> <BR> OTHER X SERVERS <BR> <BR> Commercial X servers may provide support for cards not supported by <BR> XFree86, and might give better performances. Only cards not supported <BR> by XFree86 are listed here. Contact the vendors directly or check the <BR> Commercial HOWTO for more info. <BR> <BR> Accelerated-X ($199, X Inside, Inc., <A HREF="mailto:info@xinside.com)">info@xinside.com)</A> <BR> <BR> * ATI Mach64 <BR> * Compaq QVision 2000 <BR> * Matrox MGA-I, MGA-II <BR> * Number Nine I-128 <BR> <BR> 16 bit support for ATI Mach32, ATI Mach 64, Cirrus 542x/543x, IBM <BR> XGA, IIT AGX-014/015, Matrox MGA, #9 I-128, Oak OTI-077/087, S3 <BR> cards, ET4000, ET4000/W32 series, Weitek P9000, WD90C30/31 <BR> <BR> 32 bit support for ATI Mach64, Cirrus 5434, Matrox MGA, #9 I-128, <BR> S3-928/864/964, ET4000/W32p, Weitek P9000 <BR> <BR> Next version of Accel-X will support 24 bit packed pixel modes. <BR> <BR> Metro-X ($150, Metro Link, <A HREF="mailto:sales@metrolink.com)">sales@metrolink.com)</A> <BR>
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -