ex5.lst

基于51单片机的16*16点阵

C51 COMPILER V9.00   EX5                                                                   04/12/2010 16:55:40 PAGE 1   


C51 COMPILER V9.00, COMPILATION OF MODULE EX5
OBJECT MODULE PLACED IN ex5.OBJ
COMPILER INVOKED BY: d:\Keil\C51\BIN\C51.EXE ex5.c BROWSE DEBUG OBJECTEXTEND

line level    source

   1          #include <reg52.h>
   2          #define BLKN 8
   3          #define uchar unsigned char
   4          #define uint  unsigned int
   5          uchar i,k,j,l;                                                                                            
             -                                                                                                                        
             -                                                                                                       
   6           sbit G  =P1^7;
   7           sbit RCK=P1^6;
   8           sbit SCLR=P1^5;
   9           void delay(uint x)
  10           {
  11   1           uint a,b;
  12   1               for(a=x;a>0;a--)
  13   1                  for(b=110;b>0;b--);
  14   1       
  15   1       }
  16           uint code bmp[][128]=
  17           {
  18                  {
  19                  0xDF,0xFF,0xEF,0xFF,0xFD,0xFF,0xDE,0xFF,0xEC,0x01,0xEF,0xFF,0xFD,0xFF,0xEE,0xFF,
  20                  0xEF,0xFF,0xE7,0xFF,0x80,0x03,0xEE,0x01,0x02,0x03,0xEF,0x81,0xFB,0xFF,0xFD,0xFF,
  21                  0xFA,0xFB,0x01,0xBD,0xF7,0x7F,0x68,0x07,0xF6,0xFB,0xDD,0xBD,0xF7,0x7F,0xAD,0x77,
  22                  0xEE,0x03,0xDD,0xBD,0xEF,0x7F,0xAD,0xB7,0xCF,0xFF,0xDD,0xBD,0xE0,0x07,0xED,0xF7,
  23                  0xA4,0x01,0xDD,0xBD,0xFF,0x7F,0xD0,0x01,0x69,0xDD,0xDB,0xBD,0xF7,0x5F,0xDD,0x77,
  24                  0xED,0xDD,0xEB,0xBD,0xF3,0x6F,0x1D,0xB7,0xEC,0x01,0xF7,0xBD,0xE7,0x77,0xDD,0xF7,
  25                  0xED,0xDD,0xEB,0x81,0xEF,0x73,0xDC,0x01,0xED,0xDD,0xDC,0xBD,0xDD,0x7B,0xDF,0xF7,
  26                  0xEC,0x01,0xBD,0xBD,0xFE,0x7F,0xDF,0xD7,0xED,0xFD,0x7F,0xFF,0xFF,0x7F,0xDF,0xEF
  27                  
  28                  }, //                     0
  29          
  30                  {
  31                  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xCF,
  32                  0xE4,0x00,0xFF,0xFF,0xE0,0x73,0xE7,0xCF,0xF3,0xF9,0xFF,0xF3,0xC3,0x13,0xE7,0xC9,
  33                  0xF3,0xF9,0xC0,0x01,0xF0,0x83,0xE1,0x00,0x80,0x09,0xFE,0x7F,0x80,0x73,0x00,0xC3,
  34                  0xC4,0xC9,0xFE,0x7F,0xE3,0x33,0xE0,0x01,0xE4,0xC9,0xFE,0x7F,0xE0,0x93,0xE6,0x73,
  35                  0xE4,0xC9,0xFE,0x7F,0xC0,0x90,0x87,0x23,0x0C,0x09,0xFE,0x7F,0xC3,0x81,0x87,0x27,
  36                  0xCC,0xC9,0xFE,0x7F,0x92,0x33,0xE7,0x8F,0xCC,0xF9,0xFE,0x71,0xF3,0xF3,0xE7,0x87,
  37                  0xCF,0xC1,0x80,0x00,0xF3,0xF3,0x86,0x20,0xCF,0xF1,0xFF,0xFF,0xF3,0xF3,0xC0,0xF9,
  38                  0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
  39                  }                //     1
  40              };
  41          uchar idata dispram[128];
  42           void main()
  43           {
  44   1          SCON=0x00;             //串口工作模式0；移位寄存器方式
  45   1              TMOD=0x01;                         //定时器T0工作方式1：16位方式
  46   1              TR0=1;                 //启动定时器t0
  47   1              P1=0x3f;               //P1端口初值：允许接收、锁定、显示
  48   1          IE=0x82;
  49   1              while(1)
  50   1                {
  51   2                 for(i=0;i<2;i++) 
  52   2                  {
  53   3                              for(j=0;j<8;j++)
C51 COMPILER V9.00   EX5                                                                   04/12/2010 16:55:40 PAGE 2   

  54   3                         for(k=1;k<9;k++)
  55   3                         {
  56   4                           for(l=0;l<16;l++)
  57   4                                 {
  58   5                             dispram[l*BLKN]=dispram[l*BLKN]<<1|dispram[l*BLKN+1]>>7;
  59   5                                 dispram[l*BLKN+1]=dispram[l*BLKN+1]<<1|dispram[l*BLKN+2]>>7;
  60   5                                 dispram[l*BLKN+2]=dispram[l*BLKN+2]<<1|dispram[l*BLKN+3]>>7;
  61   5                                 dispram[l*BLKN+3]=dispram[l*BLKN+3]<<1|dispram[l*BLKN+4]>>7;
  62   5                                 dispram[l*BLKN+4]=dispram[l*BLKN+4]<<1|dispram[l*BLKN+5]>>7;
  63   5                                 dispram[l*BLKN+5]=dispram[l*BLKN+5]<<1|dispram[l*BLKN+6]>>7;
  64   5                                 dispram[l*BLKN+6]=dispram[l*BLKN+6]<<1|dispram[l*BLKN+7]>>7;
  65   5                             dispram[l*BLKN+7]=dispram[l*BLKN+7]<<1|bmp[i][l*BLKN+j]>>(8-k);
  66   5                             }
  67   4                                 delay(10);
  68   4                         }
  69   3              }                                                                                    
  70   2                }
  71   1       }
  72           void leddisplay(void)  interrupt 1 using 1
  73           {
  74   1         uchar i,j=BLKN;                       //设定显示屏刷新率62.5帧/s
  75   1         TH0=0xfd;
  76   1         TL0=0xf0;
  77   1         i=P1;                                         //读取当前显示的行列
  78   1         i=++i&0x0f;                           /*行数自动加一，屏蔽高4位 ，注意P1.0,P1.1,P1.2,P1,3控制行的显示，
  79   1                                     通过4线16线译码器，对16行进行控制*/
  80   1         do
  81   1           {                                                                                          
  82   2                 j--;          
  83   2                 SBUF=dispram[i*BLKN+j];        //送显示数据，SBUF串行数据缓冲寄存器
  84   2                 while(!TI);                             /*串行发送停止位的开始时，由内部硬件使T11，向CPU发出中断请求
  85   2                                              ，在中断服务程序中，必须用软件使其清0*/
  86   2                 TI=0;
  87   2               }
  88   1         while(j);                                      //完成一行数据的发送
  89   1         G=1;                                                   //消隐（关闭显示）
  90   1         P1&=0xf0;                                      //行号端口清0
  91   1         RCK=1;                                                  //显示数据打入输出锁存器
  92   1         P1|=i;                                                  //写入行号
  93   1         RCK=0;                                                  //锁存显示数据
  94   1         G=0;                                                    //打开显示
  95   1      }


MODULE INFORMATION:   STATIC OVERLAYABLE
   CODE SIZE        =    572    ----
   CONSTANT SIZE    =    512    ----
   XDATA SIZE       =   ----    ----
   PDATA SIZE       =   ----    ----
   DATA SIZE        =      4    ----
   IDATA SIZE       =    128    ----
   BIT SIZE         =   ----    ----
END OF MODULE INFORMATION.


C51 COMPILATION COMPLETE.  0 WARNING(S),  0 ERROR(S)