snort.8

该软件是一个有名的基于网络的入侵检测系统

.B not
to combine primitives.  E.g., `host foo and not port ftp and not port ftp-data'.
To save typing, identical qualifier lists can be omitted.  E.g.,
`tcp dst port ftp or ftp-data or domain' is exactly the same as
`tcp dst port ftp or tcp dst port ftp-data or tcp dst port domain'.
.LP
Allowable primitives are:
.IP "\fBdst host \fIhost\fR"
True if the IP destination field of the packet is \fIhost\fP,
which may be either an address or a name.
.IP "\fBsrc host \fIhost\fR"
True if the IP source field of the packet is \fIhost\fP.
.IP "\fBhost \fIhost\fP
True if either the IP source or destination of the packet is \fIhost\fP.
Any of the above host expressions can be prepended with the keywords,
\fBip\fP, \fBarp\fP, or \fBrarp\fP as in:
.in +.5i
.nf
\fBip host \fIhost\fR
.fi
.in -.5i
which is equivalent to:
.in +.5i
.nf
\fBether proto \fI\\ip\fB and host \fIhost\fR
.fi
.in -.5i
If \fIhost\fR is a name with multiple IP addresses, each address will
be checked for a match.
.IP "\fBether dst \fIehost\fP
True if the ethernet destination address is \fIehost\fP.  \fIEhost\fP
may be either a name from /etc/ethers or a number (see
.IR ethers (3N)
for numeric format).
.IP "\fBether src \fIehost\fP
True if the ethernet source address is \fIehost\fP.
.IP "\fBether host \fIehost\fP
True if either the ethernet source or destination address is \fIehost\fP.
.IP "\fBgateway\fP \fIhost\fP
True if the packet used \fIhost\fP as a gateway.  I.e., the ethernet
source or destination address was \fIhost\fP but neither the IP source
nor the IP destination was \fIhost\fP.  \fIHost\fP must be a name and
must be found in both /etc/hosts and /etc/ethers.  (An equivalent
expression is
.in +.5i
.nf
\fBether host \fIehost \fBand not host \fIhost\fR
.fi
.in -.5i
which can be used with either names or numbers for \fIhost / ehost\fP.)
.IP "\fBdst net \fInet\fR"
True if the IP destination address of the packet has a network
number of \fInet\fP. \fINet\fP may be either a name from /etc/networks
or a network number (see \fInetworks(4)\fP for details).
.IP "\fBsrc net \fInet\fR"
True if the IP source address of the packet has a network
number of \fInet\fP.
.IP "\fBnet \fInet\fR"
True if either the IP source or destination address of the packet has a network
number of \fInet\fP.
.IP "\fBnet \fInet\fR \fBmask \fImask\fR"
True if the IP address matches \fInet\fR with the specific netmask.
May be qualified with \fBsrc\fR or \fBdst\fR.
.IP "\fBnet \fInet\fR/\fIlen\fR"
True if the IP address matches \fInet\fR a netmask \fIlen\fR bits wide.
May be qualified with \fBsrc\fR or \fBdst\fR.
.IP "\fBdst port \fIport\fR"
True if the packet is ip/tcp or ip/udp and has a
destination port value of \fIport\fP.
The \fIport\fP can be a number or a name used in /etc/services (see
.IR tcp (4P)
and
.IR udp (4P)).
If a name is used, both the port
number and protocol are checked.  If a number or ambiguous name is used,
only the port number is checked (e.g., \fBdst port 513\fR will print both
tcp/login traffic and udp/who traffic, and \fBport domain\fR will print
both tcp/domain and udp/domain traffic).
.IP "\fBsrc port \fIport\fR"
True if the packet has a source port value of \fIport\fP.
.IP "\fBport \fIport\fR"
True if either the source or destination port of the packet is \fIport\fP.
Any of the above port expressions can be prepended with the keywords,
\fBtcp\fP or \fBudp\fP, as in:
.in +.5i
.nf
\fBtcp src port \fIport\fR
.fi
.in -.5i
which matches only tcp packets whose source port is \fIport\fP.
.IP "\fBless \fIlength\fR"
True if the packet has a length less than or equal to \fIlength\fP.
This is equivalent to:
.in +.5i
.nf
\fBlen <= \fIlength\fP.
.fi
.in -.5i
.IP "\fBgreater \fIlength\fR"
True if the packet has a length greater than or equal to \fIlength\fP.
This is equivalent to:
.in +.5i
.nf
\fBlen >= \fIlength\fP.
.fi
.in -.5i
.IP "\fBip proto \fIprotocol\fR"
True if the packet is an ip packet (see
.IR ip (4P))
of protocol type \fIprotocol\fP.
\fIProtocol\fP can be a number or one of the names
\fIicmp\fP, \fIigrp\fP, \fIudp\fP, \fInd\fP, or \fItcp\fP.
Note that the identifiers \fItcp\fP, \fIudp\fP, and \fIicmp\fP are also
keywords and must be escaped via backslash (\\), which is \\\\ in the C-shell.
.IP "\fBether broadcast\fR"
True if the packet is an ethernet broadcast packet.  The \fIether\fP
keyword is optional.
.IP "\fBip broadcast\fR"
True if the packet is an IP broadcast packet.  It checks for both
the all-zeroes and all-ones broadcast conventions, and looks up
the local subnet mask.
.IP "\fBether multicast\fR"
True if the packet is an ethernet multicast packet.  The \fIether\fP
keyword is optional.
This is shorthand for `\fBether[0] & 1 != 0\fP'.
.IP "\fBip multicast\fR"
True if the packet is an IP multicast packet.
.IP  "\fBether proto \fIprotocol\fR"
True if the packet is of ether type \fIprotocol\fR.
\fIProtocol\fP can be a number or a name like
\fIip\fP, \fIarp\fP, or \fIrarp\fP.
Note these identifiers are also keywords
and must be escaped via backslash (\\).
[In the case of FDDI (e.g., `\fBfddi protocol arp\fR'), the
protocol identification comes from the 802.2 Logical Link Control
(LLC) header, which is usually layered on top of the FDDI header.
\fITcpdump\fP assumes, when filtering on the protocol identifier,
that all FDDI packets include an LLC header, and that the LLC header
is in so-called SNAP format.]
.IP "\fBdecnet src \fIhost\fR"
True if the DECNET source address is
.IR host ,
which may be an address of the form ``10.123'', or a DECNET host
name.  [DECNET host name support is only available on Ultrix systems
that are configured to run DECNET.]
.IP "\fBdecnet dst \fIhost\fR"
True if the DECNET destination address is
.IR host .
.IP "\fBdecnet host \fIhost\fR"
True if either the DECNET source or destination address is
.IR host .
.IP "\fBip\fR, \fBarp\fR, \fBrarp\fR, \fBdecnet\fR"
Abbreviations for:
.in +.5i
.nf
\fBether proto \fIp\fR
.fi
.in -.5i
where \fIp\fR is one of the above protocols.
.IP "\fBlat\fR, \fBmoprc\fR, \fBmopdl\fR"
Abbreviations for:
.in +.5i
.nf
\fBether proto \fIp\fR
.fi
.in -.5i
where \fIp\fR is one of the above protocols.
Note that
\fISnort\fP does not currently know how to parse these protocols.
.IP  "\fBtcp\fR, \fBudp\fR, \fBicmp\fR"
Abbreviations for:
.in +.5i
.nf
\fBip proto \fIp\fR
.fi
.in -.5i
where \fIp\fR is one of the above protocols.
.IP  "\fIexpr relop expr\fR"
True if the relation holds, where \fIrelop\fR is one of >, <, >=, <=, =, !=,
and \fIexpr\fR is an arithmetic expression composed of integer constants
(expressed in standard C syntax), the normal binary operators
[+, -, *, /, &, |], a length operator, and special packet data accessors.
To access
data inside the packet, use the following syntax:
.in +.5i
.nf
\fIproto\fB [ \fIexpr\fB : \fIsize\fB ]\fR
.fi
.in -.5i
\fIProto\fR is one of \fBether, fddi,
ip, arp, rarp, tcp, udp, \fRor \fBicmp\fR, and
indicates the protocol layer for the index operation.
The byte offset, relative to the indicated protocol layer, is
given by \fIexpr\fR.
\fISize\fR is optional and indicates the number of bytes in the
field of interest; it can be either one, two, or four, and defaults to one.
The length operator, indicated by the keyword \fBlen\fP, gives the
length of the packet.

For example, `\fBether[0] & 1 != 0\fP' catches all multicast traffic.
The expression `\fBip[0] & 0xf != 5\fP'
catches all IP packets with options. The expression
`\fBip[6:2] & 0x1fff = 0\fP'
catches only unfragmented datagrams and frag zero of fragmented datagrams.
This check is implicitly applied to the \fBtcp\fP and \fBudp\fP
index operations.
For instance, \fBtcp[0]\fP always means the first
byte of the TCP \fIheader\fP, and never means the first byte of an
intervening fragment.
.LP
Primitives may be combined using:
.IP
A parenthesized group of primitives and operators
(parentheses are special to the Shell and must be escaped).
.IP
Negation (`\fB!\fP' or `\fBnot\fP').
.IP
Concatenation (`\fB&&\fP' or `\fBand\fP').
.IP
Alternation (`\fB||\fP' or `\fBor\fP').
.LP
Negation has highest precedence.
Alternation and concatenation have equal precedence and associate
left to right.  Note that explicit \fBand\fR tokens, not juxtaposition,
are now required for concatenation.
.LP
If an identifier is given without a keyword, the most recent keyword
is assumed.
For example,
.in +.5i
.nf
\fBnot host vs and ace\fR
.fi
.in -.5i
is short for
.in +.5i
.nf
\fBnot host vs and host ace\fR
.fi
.in -.5i
which should not be confused with
.in +.5i
.nf
\fBnot ( host vs or ace )\fR
.fi
.in -.5i
.LP
Expression arguments can be passed to Snort as either a single argument
or as multiple arguments, whichever is more convenient.
Generally, if the expression contains Shell metacharacters, it is
easier to pass it as a single, quoted argument.
Multiple arguments are concatenated with spaces before being parsed.
.SH RULES
Snort uses a simple but flexible rules language to describe network packet 
signatures and associate them with actions.  The current rules document can
be found at http://www.snort.org/snort_rules.html.
.SH HISTORY
.B Snort
is distributed under the 
.D GPL
and has been freely available for UNIX since 1998.
.SH DIAGNOSTICS
.B Snort
returns a 0 on a successful exit, 1 if it exits on an error.
.SH BUGS
Send bug reports to [e-mail]
.SH AUTHOR
Martin Roesch <[e-mail]>
.SH "SEE ALSO"
.BR tcpdump (1),
.BR pcap (3)