interrup.f

中断列表(2) 352K

 0171h	"_RegRemapPreDefKey"
 0172h	"End_V86_Serialization"
 0173h	"_Assert_Range"
 0174h	"_Sprintf"
 0175h	"_PageChangePager"
 0176h	"_RegCreateDynKey"
 0177h	"RegQMulti"
 0178h	"Boost_Thread_With_VM"
 0179h	"Get_Boot_Flags"
 017Ah	"Set_Boot_Flags"
 017Bh	"_lstrcpyn"
 017Ch	"_lstrlen"
 017Dh	"_lmemcpy"
 017Eh	"_GetVxDName"
 017Fh	"Force_Mutexes_Free"
 0180h	"Restore_Forced_Mutexes"
 0181h	"_AddReclaimableItem"
 0182h	"_SetReclaimableItem"
 0183h	"_EnumReclaimableItem"
 0184h	"Time_Slice_Wake_Sys_VM"
 0185h	"VMM_Replace_Global_Environment"
 0186h	"Begin_Non_Serial_Nest_V86_Exec"
 0187h	"Get_Nest_Exec_Status"
 0188h	"Open_Boot_Log"
 0189h	"Write_Boot_Log"
 018Ah	"Close_Boot_Log"
 018Bh	"EnableDisable_Boot_Log"
 018Ch	"_Call_On_My_Stack"
 018Dh	"Get_Inst_V86_Int_Vec_Base"
 018Eh	"_lstrcmpi"
 018Fh	"_strupr"
 0190h	"Log_Fault_Call_Out"
 0191h	"_AtEventTime"
 0191h	...last service for Windows95 SP1
 811Ch	unhook device service??? (called by KEYREMAP.VXD)
	EAX = service ID (high word = VxD ID, low = service number)
	ESI -> handler
SeeAlso: #01266,#01267,INT 2F/AX=1684h/BX=0001h
--------W-20----Vx0002-----------------------
INT 20 P - Microsoft Windows - DEBUG - VxD SERVICES
	VxD = 0002h
Note:	the desired VxD and service number are identified by the data
	  immediately following the INT 20 instruction, as in:
		INT	20h
		DW	service number
		DW	VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01266,#01340

(Table 01266)
Values for DEBUG (VxD ID 0002h) service number:
 0000h	get version
 0001h	"DEBUG_Fault"
 0002h	"DEBUG_CheckFault"
 0003h	"_DEBUG_LoadSyms"
SeeAlso: #01265,#01267
--------W-20----Vx0003-----------------------
INT 20 P - Microsoft Windows - VPICD - VxD SERVICES
	VxD = 0003h
Note:	the desired VxD and service number are identified by the data
	  immediately following the INT 20 instruction, as in:
		INT	20h
		DW	service number
		DW	VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01267,#01340

(Table 01267)
Values for VPICD (VxD ID 0003h) service number:
 0000h	get version
 0001h	virtualize IRQ
 0002h	set interrupt request
 0003h	clear interrupt request
 0004h	physical EOI
 0005h	get complete status
 0006h	get status
 0007h	test physical request
 0008h	physically mask
 0009h	physically unmask
 000Ah	set automatic masking
 000Bh	get IRQ complete status
 000Ch	convert handle to IRQ
 000Dh	convert IRQ to interrupt
 000Eh	convert interrupt to IRQ
 000Fh	call on hardware interrupt
 0010h	force default owner
 0011h	force default behavior
 0012h	"VPICD_Auto_Mask_At_Inst_Swap"
 0013h	"VPICD_Begin_Inst_Page_Swap"
 0014h	"VPICD_End_Inst_Page_Swap"
 0015h	"VPICD_Virtual_EOI"
 0016h	"VPICD_Get_Virtualization_Count"
 0017h	"VPICD_Post_Sys_Critical_Init"
 0018h	"VPICD_VM_SlavePIC_Mask_Change"
SeeAlso: #01265,#01268,INT 2F/AX=1684h/BX=0003h
--------W-20----Vx0004-----------------------
INT 20 P - Microsoft Windows - VDMAD - VxD SERVICES
	VxD = 0004h
Note:	the desired VxD and service number are identified by the data
	  immediately following the INT 20 instruction, as in:
		INT	20h
		DW	service number
		DW	VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340

(Table 01268)
Values for VDMAD (VxD ID 0004h) service number:
 0000h	get version
 0001h	virtualize channel
 0002h	get region information
 0003h	set region information
 0004h	get virtual state
 0005h	set virtual state
 0006h	set physical state
 0007h	mask channel
 0008h	unmask channel
 0009h	lock DMA region
 000Ah	unlock DMA region
 000Bh	scatter lock
 000Ch	scatter unlock
 000Dh	reserve buffer space
 000Eh	request buffer
 000Fh	release buffer
 0010h	copy to buffer
 0011h	copy from buffer
 0012h	default handler
 0013h	disable translation
 0014h	enable translation
 0015h	get EISA address mode
 0016h	set EISA address mode
 0017h	unlock DMA region (ND)
 0018h	"VDMAD_Phys_Mask_Channel"
 0019h	"VDMAD_Phys_Unmask_Channel"
 001Ah	"VDMAD_Unvirtualize_Channel"
 001Bh	"VDMAD_Set_IO_Address"
 001Ch	"VDMAD_Get_Phys_Count"
 001Dh	"VDMAD_Get_Phys_Status"
 001Eh	"VDMAD_Get_Max_Phys_Page"
 001Fh	"VDMAD_Set_Channel_Callbacks"
 0020h	"VDMAD_Get_Virt_Count"
 0021h	"VDMAD_Set_Virt_Count"
 0021h	...last service for Windows95 SP1
SeeAlso: #01267,#02646,#02683 at INT 2F/AX=1684h/BX=0444h
--------W-20----Vx0005-----------------------
INT 20 P - Microsoft Windows - VTD - VxD SERVICES
	VxD = 0005h
Note:	the desired VxD and service number are identified by the data
	  immediately following the INT 20 instruction, as in:
		INT	20h
		DW	service number
		DW	VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340

(Table 01269)
Values for VTD (VxD ID 0005h) service number:
 0000h	get version
 0001h	update system clock
 0002h	get interrupt period
 0003h	begin minimum interrupt period
 0004h	end minimum interrupt period
 0005h	disable trapping
 0006h	enable trapping
 0007h	get real time
	Return: EDX:EAX = time in 840ns units since Windows was started
 0008h	"VTD_Get_Date_And_Time"
 0009h	"VTD_Adjust_VM_Count"
 000Ah	"VTD_Delay"
SeeAlso: #02646 at INT 2F/AX=1684h/BX=0005h
--------W-20----Vx0006-----------------------
INT 20 P - Microsoft Windows - V86MMGR - VxD SERVICES
	VxD = 0006h
Note:	the desired VxD and service number are identified by the data
	  immediately following the INT 20 instruction, as in:
		INT	20h
		DW	service number
		DW	VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340

(Table 01270)
Values for V86MMGR (VxD ID 0006h) service number:
 00h	get version
 01h	allocate V86 pages
 02h	set EMS and XMS limits
 03h	get EMS and XMS limits
 04h	set mapping information
 05h	get mapping information
 06h	Xlat API
 07h	load client pointer
 08h	allocate buffer
 09h	free buffer
 0Ah	get Xlat buffer state
 0Bh	set Xlat buffer state
 0Ch	get VM flat selector
 0Dh	map pages
 0Eh	free page map region
 0Fh	_LocalGlobalReg
 10h	get page status
 11h	set local A20
 12h	reset base pages
 13h	set available mapped pages
 14h	"V86MMGR_NoUMBInitCalls"
 15h	"V86MMGR_Get_EMS_XMS_Avail"
 16h	"V86MMGR_Toggle_HMA"
	EAX = ???
 17h	"V86MMGR_Dev_Init"
 18h	"V86MMGR_Alloc_UM_Page"
SeeAlso: #02646,#01271,INT 2F/AX=1684h"DEVICE API"
--------W-20----Vx0007-----------------------
INT 20 P - Microsoft Windows - PageSwap - VxD SERVICES
	VxD = 0007h
Note:	the desired VxD and service number are identified by the data
	  immediately following the INT 20 instruction, as in:
		INT	20h
		DW	service number
		DW	VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340

(Table 01271)
Values for PageSwap (VxD ID 0007h) service number:
 00h	get version
 01h	test create
 02h	create swap file
 03h	destroy swap file
 04h	in
 05h	out
 06h	test if I/O valid
 07h	"Read_Or_Write"
 08h	"Grow_File"
 09h	"Init_File"
SeeAlso: #01270,#01272,#01273,#02648
--------W-20----Vx0009-----------------------
INT 20 P - Microsoft Windows - REBOOT - VxD SERVICES
	VxD = 0009h
Note:	the desired VxD and service number are identified by the data
	  immediately following the INT 20 instruction, as in:
		INT	20h
		DW	service number
		DW	VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340

(Table 01272)
Values for REBOOT (VxD ID 0009h) service number:
 00h	get REBOOT version???
 01h	???
 02h	???
 03h	...last service for Windows95 SP1
SeeAlso: #01271,#01273,#02642
--------W-20----Vx000A-----------------------
INT 20 P - Microsoft Windows - VDD - VxD SERVICES
	VxD = 000Ah
Note:	the desired VxD and service number are identified by the data
	  immediately following the INT 20 instruction, as in:
		INT	20h
		DW	service number
		DW	VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340

(Table 01273)
Values for VDD (VxD ID 000Ah) service number:
 00h	get version
 01h	PIF state
 02h	get GrabRtn
 03h	hide cursor
 04h	set VM type
 05h	get ModTime
 06h	set HCurTrk
 07h	message clear screen
 08h	message foreground color
 09h	message background color
 0Ah	message output text
 0Bh	message set cursor position
 0Ch	query access
 0Dh	"VDD_Check_Update_Soon"
 0Eh	"VDD_Get_Mini_Dispatch_Table"
 0Fh	"VDD_Register_Virtual_Port"
	DX = base I/O port number
	CL = number of contiguous ports???
 10h	"VDD_Get_VM_Info"
 11h	"VDD_Get_Special_VM_IDs"
	Return: ESI = ???
		EDI = ???
 12h	"VDD_Register_Extra_Screen_Selector"
 13h	"VDD_Takeover_VGA_Port"
	DX = VGA I/O port number (03C2h, etc.)
	ECX -> routine to call on I/O access
	Return: ECX -> previous handler (to be jumped to at end of new handler)
 14h	???
 15h	???
 16h	...last service for Windows95 SP1
SeeAlso: #01272,#01274,#02648
--------W-20----Vx000B-----------------------
INT 20 P - Microsoft Windows - VSD - VxD SERVICES
	VxD = 000Bh
Note:	the desired VxD and service number are identified by the data
	  immediately following the INT 20 instruction, as in:
		INT	20h
		DW	service number
		DW	VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340

(Table 01274)
Values for VSD (VxD ID 000Bh) service number:
 00h	get version
 01h	bell
 02h	sound on
 03h	"VSD_TakeSoundPort"
SeeAlso: #01273,#01275
--------W-20----Vx000C-----------------------
INT 20 P - Microsoft Windows - VMD / VMOUSE - VxD SERVICES
	VxD = 000Ch
Note:	the desired VxD and service number are identified by the data
	  immediately following the INT 20 instruction, as in:
		INT	20h
		DW	service number
		DW	VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340

(Table 01275)
Values for VMD / VMOUSE (VxD ID 000Ch) service number:
 0000h	get version
 0001h	set mouse type
 0002h	get mouse owner
 0003h	"VMOUSE_Post_Pointer_Message"
 0004h	"VMOUSE_Set_Cursor_Proc"
 0005h	"VMOUSE_Call_Cursor_Proc"
 0006h	"VMOUSE_Set_Mouse_Data~Get_Mouse_Data"
 0007h	"VMOUSE_Manipulate_Pointer_Message"
 0008h	"VMOUSE_Set_Middle_Button"
 0009h	"VMD_Set_Middle_Button"
 000Ah	"VMD_Enable_Disable_Mouse_Events"
 000Bh	"VMD_Post_Absolute_Pointer_Message"
	...last service for Windows95 SP1
SeeAlso: #01274,#01276,INT 2F/AX=1684h/BX=000Ch
--------W-20----Vx000D-----------------------
INT 20 P - Microsoft Windows - VKD - VxD SERVICES
	VxD = 000Dh
Note:	the desired VxD and service number are identified by the data
	  immediately following the INT 20 instruction, as in:
		INT	20h
		DW	service number
		DW	VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340

(Table 01276)
Values for VKD (VxD ID 000Dh) service number:
 0000h	get version
 0001h	define hotkey
 0002h	remove hotkey
 0003h	locally enable hotkey
 0004h	locally disable hotkey
 0005h	reflect hotkey
 0006h	cancel hotkey state
 0007h	force keys
 0008h	get keyboard owner
 0009h	define paste mode
 000Ah	start pasting
 000Bh	cancel paste
 000Ch	get message key
 000Dh	peek message key
 000Eh	flush message key queue
 000Fh	"VKD_Enable_Keyboard"
 0010h	"VKD_Disable_Keyboard"
 0011h	"VKD_Get_Shift_State"
 0012h	"VKD_Filter_Keyboard_Input"
 0013h	"VKD_Put_Byte"
 0014h	"VKD_Set_Shift_State"
	...last service for Windows95 SP1
SeeAlso: #01275,#01277
--------W-20----Vx000E-----------------------
INT 20 P - Microsoft Windows - VCD - VxD SERVICES
	VxD = 000Eh
Note:	the desired VxD and service number are identified by the data
	  immediately following the INT 20 instruction, as in:
		INT	20h
		DW	service number
		DW	VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340

(Table 01277)
Values for VCD (VxD ID 000Eh) service number:
 0000h	get version
 0001h	set port global
 0002h	get focus
 0003h	virtualize port
 0004h	"VCD_Acquire_Port"
 0005h	"VCD_Free_Port"
 0006h	"VCD_Acquire_Port_Windows_Style"
 0007h	"VCD_Free_Port_Windows_Style"
 0008h	"VCD_Steal_Port_Windows_Style"
 0009h	"VCD_Find_COM_Index"
 000Ah	"VCD_Set_Port_Global_Special"
 000Bh	"VCD_Virtualize_Port_Dynamic"
 000Ch	"VCD_Unvirtualize_Port_Dynamic"
	...last service for Windows95 SP1
SeeAlso: #01276,#01278
--------W-20----Vx0010-----------------------
INT 20 P - Microsoft Windows - BlockDev / IOS - VxD SERVICES
	VxD = 0010h
Note:	the desired VxD and service number are identified by the data
	  immediately following the INT 20 instruction, as in:
		INT	20h
		DW	service number
		DW	VxD identifier
SeeAlso: INT 2F/AX=1684h"DEVICE API",INT 30"Windows",#01265,#01340

(Table 01278)
Values for BlockDev/IOS (VxD ID 0010h) service number:
 0000h	get version
 0001h	register device
 0002h	find INT 13 drive
 0003h	get device list
 0004h	send command
 0005h	command complete
 0006h	synchronous command
 0007h	"IOS_Register"
 0008h	"IOS_Requestor_Service"
 0009h	"IOS_Exclusive_Access"
 000Ah	"IOS_Send_Next_Command"
 000Bh	"IOS_Set_Async_Time_Out"