interrup.d

中断列表(1) 352K

	QS/16, RS/16	8 MHz	     -		16 MHz
	QS/16S		8 MHz	     -		16 MHz
	QS/20, RS/20	8 MHz	     -		20 MHz
	RS/20C		5 MHz	    10 MHz	20 MHz
	RS/25C		5 MHz	    12.5 MHz	25 MHz
--------b-166F0B-----------------------------
INT 16 - HP Vectra ES/QS/RS EX-BIOS - SET PROCESSOR SPEED TO LOW
	AX = 6F0Bh
Return: AH = 00h (successful)
Notes:	see AX=6F0Ah for speed definitions
	supported by ES, QS, and RS series of HP Vectras
SeeAlso: AX=6F00h,AX=6F0Ah
--------b-166F0C-----------------------------
INT 16 - HP Vectra ES/QS/RS EX-BIOS - SET PROCESSOR SPEED TO HIGH
	AX = 6F0Ch
Return: AH = 00h (successful)
Notes:	see AX=6F0Ah for speed definitions
	supported by ES, QS, and RS series of HP Vectras
SeeAlso: AX=6F00h,AX=6F0Ah
--------b-166F0D-----------------------------
INT 16 - HP Vectra ES/QS/RS EX-BIOS - GET HIL Extended BIOS INTERRUPT NUMBER
	AX = 6F0Dh
Return: AH = interrupt number (default 6Fh, 02h means 6Fh as well)
Notes:	supported by ES, QS, and RS series of HP Vectras
	called by MS Windows HPSYSTEM.DRV and HPEBIOS.386 to support the HP-HIL
	  input system
SeeAlso: AX=6F00h,AX=6F0Eh,INT 6F/AH=00h"HP Vectra",INT 6F/AH=0Ah"HP"
--------b-166F0E-----------------------------
INT 16 - HP Vectra ES/QS/RS EX-BIOS - SET HIL Extended BIOS INTERRUPT NUMBER
	AX = 6F0Eh
	BL = new interrupt number (60h-6Fh,78h-7Fh)
Return: AH = status (00h = successful)
Desc:	allows the HIL Extended BIOS software to use a non-default interrupt
	  number in case of an interrupt conflict with another application
Notes:	supported by ES, QS, and RS series of HP Vectras
	called by MS Windows HPSYSTEM.DRV and HPEBIOS.386 to support the HP-HIL
	  input system
SeeAlso: AX=6F00h,AX=6F0Dh,INT 6F/AH=00h"HP",INT 6F/AH=0Ah"HP"
--------b-166F0F-----------------------------
INT 16 - HP Vectras RS/20C and RS/25C - ENABLE MEMORY CACHING
	AX = 6F0Fh
Return: AH = status
	    00h successful
	    FEh cache subsystem is bad
SeeAlso: AX=6F00h,AX=6F10h,AX=6F11h
--------b-166F10-----------------------------
INT 16 - HP Vectras RS/20C and RS/25C - DISABLE MEMORY CACHING
	AX = 6F10h
Return: AH = 00h (successful)
SeeAlso: AX=6F00h,AX=6F0Fh,AX=6F11h
--------b-166F11-----------------------------
INT 16 - HP Vectras RS/20C and RS/25C - GET MEMORY CACHING STATE
	AX = 6F11h
Return: AH = 00h (successful)
	AL bit 0 = cache state
	    0 cache disabled
	    1 cache enabled
SeeAlso: AX=6F00h,AX=6F0Fh,AX=6F10h
--------b-166F12-----------------------------
INT 16 - HP Vectras RS/20C and RS/25C - SET PROCESSOR SPEED TO MEDIUM
	AX = 6F12h
Return: AH = 00h (successful)
Note:	see AX=6F0Ah for speed definitions
SeeAlso: AX=6F00h,AX=6F0Ah
--------K-1670-------------------------------
INT 16 - FAKEY.COM - INSTALLATION CHECK
	AH = 70h
Return: AX = 1954h if installed
Program: FAKEY is a keystroke faking utility by System Enhancement Associates
--------K-1671-------------------------------
INT 16 - FAKEY.COM - PUSH KEYSTROKES
	AH = 71h
	CX = number of keystrokes
	DS:SI -> array of words containing keystrokes to be returned by AH=00h
Program: FAKEY is a keystroke faking utility by System Enhancement Associates
SeeAlso: AH=05h,AH=72h
--------K-1672-------------------------------
INT 16 - FAKEY.COM - CLEAR FAKED KEYSTROKES
	AH = 72h
Program: FAKEY is a keystroke faking utility by System Enhancement Associates
SeeAlso: AH=71h
--------K-1673-------------------------------
INT 16 - FAKEY.COM - PLAY TONES
	AH = 73h
	CX = number of tones to play
	DS:SI -> array of tones (see #00605)
Program: FAKEY is a keystroke faking utility by System Enhancement Associates
SeeAlso: INT 15/AX=1019h

Format of FAKEY.COM tone array entries:
Offset	Size	Description	(Table 00605)
 00h	WORD	divisor for timer channel 2
 02h	WORD	duration in clock ticks
--------i-167463-----------------------------
INT 16 U - FastJuice - INSTALLATION CHECK
	AX = 7463h ("tc")
Return: AX = 5443h ("TC") if installed
Program: FastJuice is a resident battery-power monitor by SeaSide Software
SeeAlso: AX=6A6Bh
--------R-1675-------------------------------
INT 16 - pcANYWHERE III - SET TICK COUNT FOR SCANNING
	AH = 75h
	AL = number of ticks between checks for new screen changes
--------R-1676-------------------------------
INT 16 - pcANYWHERE III - SET ERROR CHECKING TYPE
	AH = 76h
	AL = error checking type
	    00h none
	    01h fast
	    02h slow
--------R-1677-------------------------------
INT 16 - pcANYWHERE III - LOG OFF
	AH = 77h
	AL = mode
	    00h wait for another call
	    01h leave in Memory Resident Mode
	    02h leave in Automatic Mode
	    FFh leave in current operating mode
--------U-167761-----------------------------
INT 16 - WATCH.COM v2.x-v3.0 - INSTALLATION CHECK
	AX = 7761h ('wa')
Return: AX = 5741h ('WA') if installed
Note:	WATCH.COM is part of the "TSR" package by Kim Kokkonen
SeeAlso: INT 21/AX=7761h
--------U-167788BX7789-----------------------
INT 16 - PC Magazine PUSHDIR.COM - INSTALLATION CHECK
	AX = 7788h
	BX = 7789h
	DS:SI -> signature "PUSHDIR VERSION 1.0"
Return: AX = 7789h if installed and signature correct
	BX = 7788h
	SI destroyed
--------R-1679-------------------------------
INT 16 - pcANYWHERE III - CHECK STATUS
	AH = 79h
Return: AX = status
	    FFFFh if resident and active
	    FFFEh if resident but not active
	    FFFDh if in Memory Resident mode
	    FFFCh if in Automatic mode
	    other value if not resident
SeeAlso: AX=7B00h,INT 21/AX=2B44h
--------R-167A-------------------------------
INT 16 - pcANYWHERE III - CANCEL SESSION
	AH = 7Ah
--------R-167B00-----------------------------
INT 16 - pcANYWHERE III - SUSPEND
	AX = 7B00h
SeeAlso: AH=79h,AX=7B01h
--------R-167B01-----------------------------
INT 16 - pcANYWHERE III - RESUME
	AX = 7B01h
SeeAlso: AH=79h,AX=7B00h
--------R-167C-------------------------------
INT 16 - pcANYWHERE III - GET PORT CONFIGURATION
	AH = 7Ch
Return: AH = port number
	AL = baud rate (see #00606)
SeeAlso: AX=7B00h,AH=7Eh

(Table 00606)
Values for pcANYWHERE III baud rate:
 00h	50 baud
 01h	75 baud
 02h	110 baud
 03h	134.5 baud
 04h	150 baud
 05h	300 baud
 06h	600 baud
 07h	1200 baud
 08h	1800 baud
 09h	2000 baud
 0Ah	2400 baud
 0Bh	4800 baud
 0Ch	7200 baud
 0Dh	9600 baud
 0Eh	19200 baud
SeeAlso: #00309
--------R-167D-------------------------------
INT 16 - pcANYWHERE III - GET/SET TERMINAL PARAMETERS
	AH = 7Dh
	AL = subfunction
	    00h set terminal parameters
	    01h get terminal parameters
	    02h get configuration header and terminal parameters
	DS:CX -> terminal parameter block
SeeAlso: AH=7Ch,AH=7Eh
--------R-167E-------------------------------
INT 16 - pcANYWHERE III - COMMUNICATIONS I/O THROUGH PORT
	AH = 7Eh
	AL = subfunction
	    01h port input status
		Return AX = 0 if no characer ready,
		       AX = 1 if character ready
	    02h port input character
		Return AL = received character
	    03h port output character in CX
	    11h hang up phone
SeeAlso: AH=7Ch
--------R-167F-------------------------------
INT 16 - pcANYWHERE III - SET KEYBOARD/SCREEN MODE
	AH = 7Fh
	AL = subfunction
	    00h enable remote keyboard only
	    01h enable host keyboard only
	    02h enable both keyboards
	    08h display top 24 lines
	    09h display bottom 24 lines
	    10h Hayes modem
	    11h other modem
	    12h direct connect
--------U-1680-------------------------------
INT 16 - MAKEY.COM - INSTALLATION CHECK
	AH = 80h
Return: AX = 1954h if installed
Program: MAKEY is a utility by System Enhancement Associates
--------K-1687-------------------------------
INT 16 - DK.COM v1.03 - INSTALLATION CHECK
	AH = 87h
Return: AX = 4A57h ('JW') if installed
Program: DK.COM is the resident part of a small keyboard macro utility
	  by Digital Mechanics.
--------U-168765BX4321-----------------------
INT 16 - AT.COM version 8/26/87 - API
	AX = 8765h
	BX = 4321h
	CX = ??? or FFFFh
	if CX = FFFFh
		DX = number of event to remove or FFFFh
Return: ES:BX -> event record array (see #00607)
Program: AT.COM is a resident scheduler by Bill Frolik

Format of AT.COM event record:
Offset	Size	Description	(Table 00607)
 00h	BYTE	in-use flag (00h free, 01h in use, FFh end of array)
 01h	BYTE	day of date on which to trigger
 02h	BYTE	month of date on which to trigger
 03h	BYTE	trigger time, minute
 04h	BYTE	trigger time, hour
 05h	WORD	offset of command to be executed
--------K-1692-------------------------------
INT 16 - KEYB.COM KEYBOARD CAPABILITIES CHECK (not an actual function!)
	AH = 92h
Return: AH <= 80h if enhanced keyboard functions (AH=10h-12h) supported
Desc:	this function is called by the DOS 3.2 KEYBxx.COM and DOS 5+ KEYB.COM
	  to determine the highest supported keyboard function
Note:	many BIOSes (including at least some versions of Phoenix and AMI) will
	  destroy AH on return from functions higher than AH=12h, returning
	  12h less than was in AH on entry (due to a chain of DEC/JZ
	  instructions)
SeeAlso: AH=05h"PCjr",AH=A2h,INT 2F/AX=AD80h
--------U-1699-------------------------------
INT 16 - SCOUT v5.4 - GET ???
	AH = 99h
Return: AX = ABCDh
	BX:CX -> ??? (appears to be start of PSP for resident portion)
Program: Scout is a memory-resident file manager by New-Ware
SeeAlso: AH=9Eh
--------U-169E-------------------------------
INT 16 - SCOUT v5.4 - INSTALLATION CHECK
	AH = 9Eh
Return: AX = ABCDh if installed
Program: Scout is a memory-resident file manager by New-Ware
SeeAlso: AH=99h
--------K-16A2-------------------------------
INT 16 - KEYB.COM KEYBOARD CAPABILITIES CHECK (not an actual function!)
	AH = A2h
Return: AH <= 80h if 122-key keyboard functions (AH=20h-22h) supported
Desc:	this function is called by the DOS 3.2 KEYBxx.COM and DOS 5+ KEYB.COM
	  to determine the highest supported keyboard function
Note:	many BIOSes (including at least some versions of Phoenix and AMI) will
	  destroy AH on return from functions higher than AH=12h, returning
	  12h less than was in AH on entry (due to a chain of DEC/JZ
	  instructions)
SeeAlso: AH=05h"PCjr",AH=92h,INT 2F/AX=AD80h
--------V-16AA-------------------------------
INT 16 - PTxxx.COM - (xxx=CGA,EGA,VGA,HER...) CALL GATE FOR GRAPHICS
	AH = AAh
	Various registers set up by high level language.
Return: Graphics performed
Note:	PT stands for Paint Tools which is a graphics library for Turbo Pascal,
	  Modula 2 and others from DataBiten in Sweden. The library is
	  installed as a memory resident driver.
--------U-16AABBBXEEFF-----------------------
INT 16 U - JORJ v4.3 - INSTALLATION CHECK
	AX = AABBh
	BX = EEFFh
Return: AX = EEFFh if installed
	BX = AABBh if installed
	    CL = hotkey name (default 6Ah 'j' for Alt-J)
Program: JORJ is a shareware dictionary with phonetic lookup by Jorj Software
	  Co.
Index:	hotkeys;JORJ
--------K-16AF20BX4B33-----------------------
INT 16 - K3PLUS v6.00+ (API v2.0+) - GET EXTENDED BUFFER STATE
	AX = AF20h
	BX = 4B33h ('K3')
Return: AX = K3 version (same as returned in BX by AX=AF4Dh)
	ES:BX -> extended keyboard buffer start
	ES:DX -> extended keyboard buffer end
	ES:SI -> next keystroke
	ES:DI -> last keystroke in buffer
	CX = number of keystrokes in buffer
Program: K3PLUS is an extended keyboard driver by Matthias Paul and Axel C.
	  Frinke, originally based on the K3 extended German keyboard driver
	  by Martin Gerdes published in c't magazine in 1988
Note:	this function replaces the identical function AH=20h"K3"
SeeAlso: AH=20h"K3",AX=AF25h,AX=AF4Dh,AX=AF50h,INT 2F/AX=ED58h
--------K-16AF25BX4B33-----------------------
INT 16 - K3PLUS v6.00+ (API v2.0+) - COPY INTO EXTENDED BUFFER
	AX = AF25h
	BX = 4B33h ('K3')
	CX = number of keystrokes to copy
	ES:SI -> buffer containing keystrokes
Return: CF clear if successful
	CF set on error (i.e. buffer full)
	    CX = number of keystrokes NOT transferred
	    ES:SI -> first keystroke not transferred
Note:	this function replaces the identical function AH=25h"K3"
SeeAlso: AH=25h"K3",AX=AF20h,AX=AF4Dh,AX=AF50h,INT 2F/AX=D44Fh/BX=0001h
--------K-16AF4DBX4B33-----------------------
INT 16 - K3PLUS v6.00+ (API v2.0+) - GET VERSION INFORMATION
	AX = AF4Dh
	BX = 4B33h ('K3')
Return: AL = 50h if installed
	    BX = K3 version
	    DX = API version
	    ES:CX -> K3 structure (version-dependent) (see #00608)
Program: K3PLUS is an extended keyboard driver by Matthias Paul and Axel C.
	  Frinke, originally based on the K3 extended German keyboard driver
	  by Martin Gerdes published in c't magazine in 1988
SeeAlso: AX=AF20h,AX=AF50h,AX=AF80h,AX=AF82h/BX=4B33h,INT 2F/AX=D44Fh/BX=0000h
SeeAlso: INT 2F/AX=ED58h
Index:	installation check;K3PLUS

Format of internal K3 structure:
Offset	Size	Description	(Table 00608)
 00h  3 BYTEs	signature "K